make a shiny ford blue case?

Well, I am painting my case, but bah on fords, and smurfs. I'm going to ruin my case (said only cuz I don't know what i'm doing lol....)

Hahah-- go take those cans and make a tom green slut mobile ...

Man after years and several cases of the Blue/white/silver theme, I am so glad I went with something totally different for Night Fire, thanks to my Asus ROG mobo inspiring me

Yeah well i started it a lil late in the day so i didn't get much done (one side panel) It's my first paint job ever, and I never got online to look for anything lol.... Anywho, here we go
 
First i had to take is all apart...

 
More case parts. I am NOT taking the insides apart. don't have to tools... And I don't wanna screw it up lol...
 

 
Now i taped it off on how I wanted to do it, each stripe is supposed to be 2in apart, Some turned out to be closer but It still  looks ok. This is one of 3 coats.
 

 
The second coat starts to look better of course. Still need to get the rest done and taped off by my slow netbook is...well slow.

 
3rd coat and tape removed, did some clear coat and glossed it (2 coats) after this one.

 
Inside the house it looks really good. Botton right you can see where the lines got a little closer to each other, but *shrugs* i'm still happy with it.

 
Now though it is time to tape off the rest of it. So, lemme know what you think!

i know your build, and i'm jelly :P

Hmm, i that a good thing or a bad thing??? lol

Hot damn....that turned out A LOT better that I thought it would.
 
When I saw the tape down for stripes I went "Oh no...."
 
But I really like that....very trick. 
 
+1 to you for thinking outside the box. 

Anyway, the rest is taped up or off, so finish tomorrow....

Sexy

plaid

Will have some more pics as soon as my phone stops being retarded.....
 
  
*pics* 
Finally the phone started working again, Anyway, the other side panel first. If you look to the bottom right you will see mistake one, Stripe is too wide...oh well, I can always strip and repaint again, So i'm not too worried about all the goof ups since this is my first attempt at pray painting anything :P 

  
Also the front input panel (here I should have continued the stripes, but alas I didn't...redo later somehow lol) also the fron 5 1/4 covers. Wasn't sure what to do with them but why not stripes? And with the way I did them I can have em all point the same direction at each other, and vice versa for the two options. (no paint yet) 

  
Of course playing with paint means getting messy... Thumbs up for punching smurfs! 

  
Overal of the other side panel and other two things... 

  
Front input thing is done, notice the Coolermaster? Toomuch on one side, I swear I measured it right, just must have not cut it right....doh Also all the smal spots where paint got where it wasn't supposed to was cleaned up. 

  
Side panel is done, damn wider stripe than the rest, mocking me.... paint is still drying, at least the clear coat is. 

  
  
So the tower itself, I didn't do anything to the front or back, only the top for now, these stripes line up from one side to the other, so at least one thing went right.... 

  

  
Side panels side by side... 

  
Left side on the case with the front on and front inputs. Notice at the bottom right? missing at least one stripe, dunno how I did that one. it's what I get for being up till 3 or 4am re-taping over and over lol. I wanna do something with th HAF on this side too, just not sure what or how, so bah... 

  
Right side rear view... 

  
Right front, needs more? Just don't know what... 

  
Full frontal. That switch is for my LED lights on the top and bottom (you will see) 

  
And the lights... 

So anyway, minus the few goof ups overall i'm happy. It was a first for me and thinking now I should have tried it on my other case but oh well, live and learn right? Not I have to figure out what to do to the back, the stripes more than likely, but looks like a pain to tape off...hmmm 

Thanks. I should have practiced on something else, but, i'm not patient enough for that. Granted I've never used  spraiy paint in my life lol...well, aside from the being a kid and finding an almost empty can and spraying it at a tree or something lol

Nice work!