krillind8z
Superclocked Member
- Total Posts : 147
- Reward points : 0
- Joined: 2010/04/09 19:18:36
- Location: Las Vegas
- Status: offline
- Ribbons : 1
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 02:58:16
(permalink)
Sleinous I just wanted to say you are awesome for taking the time to help everyone! Just wanted to add this in here also if it might help. The guide I did earlier for GPU2 and Fermi. It should work fine for Kepler and GPU2 also. http://forums.evga.com/tm.aspx?m=1794797 Also put one of my 480s in with my 680 today for temp till I finished everything I was doing for the GPU2 and Fermi write up and realized that the Kepler core is located in the Fermi folder which means you can't replace the core with those 2 mixed in the same system since Kepler GPUs won't fold on core 2.22 and Fermi lose a lot using 2.25. Just something for everyone to keep in mind. Also my 480 hated the 310 Nvidia driver (since it's normally my 680 only in that system).
Main PC- HAF-X - ASUS Sabertooth x79 - i7 3820 - GTX680 2nd PC - HAF-XM - EVGA P55 SLI - i5-750 3.2GHZ - GTX480 SLI 3rd PC - Antec 900 - ASUS P5N32SLI - E6600 - GTX260_216CORE 
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 03:20:47
(permalink)
Will add this useful info in to the OP in a sec :) Thanks krillind8z!
Also could someone provide an official Stanford link to the 2.22 core so I can also post that in here? I can't seem to find it.
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 04:30:48
(permalink)
Sleinous
Will add this useful info in to the OP in a sec :) Thanks krillind8z!
Also could someone provide an official Stanford link to the 2.22 core so I can also post that in here? I can't seem to find it.
There was a official link left for 2.22 in one of the threads, I've looked for over a hour now & still haven't been able to find it. Forum search didn't seem to help with the wording I used. If I get lucky and locate it I'll post back, bu its my bed time now so it will have to wait until I get up. Actually way past it. lol
|
jflankford
FTW Member
- Total Posts : 1081
- Reward points : 0
- Joined: 2009/06/27 01:20:25
- Location: Colorado Springs
- Status: offline
- Ribbons : 4
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 05:02:20
(permalink)
TheWolf
Also could someone provide an official Stanford link to the 2.22 core
so I can also post that in here? I can't seem to find it.
There was a official link left for 2.22 in one of the threads, I've looked
for over a hour now & still haven't been able to find it.
"jimmycricket" posted one but appears to be no longer valid. http://forums.evga.com/tm.aspx?m=1788918
post edited by jflankford - 2012/11/18 05:03:37
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 05:23:16
(permalink)
Sleinous
Also could someone provide an official Stanford link to the 2.22 core so I can also post that in here? I can't seem to find it.
This is as close as I can come  , but looks like it will need a special extractor to extract . The one I've tested didn't worked, 7zip http://www.stanford.edu/~...D64/NVIDIA/Fermi/beta/
|
boballee
FTW Member
- Total Posts : 1455
- Reward points : 0
- Joined: 2011/03/16 12:19:13
- Location: Waiting for the Levee to Break at Bron-Yr-Aur
- Status: offline
- Ribbons : 8
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 05:56:35
(permalink)
mflanaga
boballee
Ok, I may be a bit early on this question, but a question on the PPD. I followed all of the instructions and have gone through two beta units (now on a third). The first two finished up about 30 min before the EOC/Stanford stats update. I should have had around 40,000 points, yes? My stats only show 6300. I have my passkey - is there anything I am missing? I'm not going to wait around (up) for the next 2 1/2 hours to see if it's just timing - I'll check in the morning to make sure. But, if there is anything else other than the passkey needed, I'm interested to know.
If you don't get the bonus points on the next update, are you qualified for the bonus at this point? I only ask because I don't know when you started folding with the passkey..
Bonus point formula
Briefly summarizing our bonus formula, the bonus is applied for users who have a passkey, have successfully returned at least 10 bonus-eligible WU's, successfully return >=80% of assigned WU's, and return the WU before the Timeout (formerly Preferred Deadline). Bonus points do not apply to partial returns.
Thanks. I've had the passkey since I started folding (July). Don't quite remember who, but someone here on the forums said it was a very important piece to have. But, regardless, I was just getting a bit nervous last night. The credit showed up during the next cycle.
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 06:09:09
(permalink)
jflankford
TheWolf
Also could someone provide an official Stanford link to the 2.22 core
so I can also post that in here? I can't seem to find it.
There was a official link left for 2.22 in one of the threads, I've looked
for over a hour now & still haven't been able to find it.
"jimmycricket" posted one but appears to be no longer valid.
http://forums.evga.com/tm.aspx?m=1788918
That's the file I have on my dekstop however someone said we should be using the stanford direct links :( So here's to trying to find it haha
|
boballee
FTW Member
- Total Posts : 1455
- Reward points : 0
- Joined: 2011/03/16 12:19:13
- Location: Waiting for the Levee to Break at Bron-Yr-Aur
- Status: offline
- Ribbons : 8
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 07:22:55
(permalink)
Question - how does one know whether or not they have the v2.22 or v2.25? I grabbed the file from Jimmy last night and followed the instructions in this thread (and HFM shows the WU's going against the 2.22 version), but so I can help out in searching for the direct link to Stanford - what am I looking for? I did find a page to download older clients, but couldn't see anything about v.2.22.
|
leftygof
FTW Member
- Total Posts : 1754
- Reward points : 0
- Joined: 2007/11/08 17:16:59
- Location: Amarillo, TX
- Status: offline
- Ribbons : 5
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 07:31:44
(permalink)
File-size is the quickest way
2.22 is about 1/2 the size
|
Barbarossa
CLASSIFIED ULTRA Member
- Total Posts : 5311
- Reward points : 0
- Joined: 2008/01/28 11:43:24
- Status: offline
- Ribbons : 25
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 07:34:01
(permalink)
TheWolf
Sleinous
Also could someone provide an official Stanford link to the 2.22 core so I can also post that in here? I can't seem to find it.
This is as close as I can come , but looks like it will need a special extractor to extract .
The one I've tested didn't worked, 7zip
http://www.stanford.edu/~...D64/NVIDIA/Fermi/beta/
according to the main paige, WinRar should do the trick http://fahwiki.net/index....AH_Core_files_manually note: that link also icludes further instructions
post edited by Barbarossa - 2012/11/18 07:35:07
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 07:45:40
(permalink)
Thanks Mr. B :-) Added to first page
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/18 21:48:12
(permalink)
Post #46 important update, save time..
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/19 00:54:38
(permalink)
thank for that, will add tonight or tomorrow - at uni all day today
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/20 12:50:01
(permalink)
I noticed last night when I picked up a project 8054 that it updated my core15 to 2.25 so you
should look at the log or TPF if you get a 8054 TPF will be off as a clue to roll back to 2.22.
I found pausing the client then completely quitting v7 before replacing the core I had no eel
effects like I was seeing when only pausing & replacing.
So this may help if the client is getting hung in a loop of core download or just setting not doing any work.
|
carldxpc
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2012/02/04 13:04:37
- Location: New Jersey
- Status: offline
- Ribbons : 0
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/21 03:11:26
(permalink)
overclock net has a direct download link to the FahCore_15 file, without doing all that extracting and hex editing, if you want to add a direct download that to the guide.
post edited by carldxpc - 2012/11/21 03:26:22
ASUS P9X79 Pro/i7 3930k Antec H2O 920/Corsair Vengence 8GB/EVGA GTX680/ WD Black 640GB/Sound Blaster X-Fi Ti/PC Power 900w/Antec 300 modded DFI UT LP X58/i7 920 cooled Thermalright Ultra 120/Corsair 6GB/HD 7870 for dnet/WD Black 640GB/Sound Blaster X-Fi Ti/PC Power 750w/Antec 300 modded ASUS M3A78/Phenom II x4 920 cooled stock/2GB Crucial/GT 440/WD Blue IDE 200GB/Sound Blaster X-FI/PC Power 750w/Antec 300 modded
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/21 04:02:56
(permalink)
Unfortunately linking to non Stanford hosted cores seems not to be allowed, is that link straight from Stanford?
|
carldxpc
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2012/02/04 13:04:37
- Location: New Jersey
- Status: offline
- Ribbons : 0
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/21 04:20:28
(permalink)
BWG has the file hosted on his own website.
As for it be "allowed" now that I'm not sure on. Maybe just have a "PM me for the file to be emailed to you" can work also.
I sent a PM
ASUS P9X79 Pro/i7 3930k Antec H2O 920/Corsair Vengence 8GB/EVGA GTX680/ WD Black 640GB/Sound Blaster X-Fi Ti/PC Power 900w/Antec 300 modded DFI UT LP X58/i7 920 cooled Thermalright Ultra 120/Corsair 6GB/HD 7870 for dnet/WD Black 640GB/Sound Blaster X-Fi Ti/PC Power 750w/Antec 300 modded ASUS M3A78/Phenom II x4 920 cooled stock/2GB Crucial/GT 440/WD Blue IDE 200GB/Sound Blaster X-FI/PC Power 750w/Antec 300 modded
|
OLD-SLO-GAMER
FTW Member
- Total Posts : 1286
- Reward points : 0
- Joined: 2008/05/07 16:31:13
- Location: Miles City Montana
- Status: offline
- Ribbons : 3
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/11/27 16:14:01
(permalink)
No wonder I am sliding backwards in the ranks  I have been waiting for QRB on tracker. I have 7 gpus running 24/7 and no QRB on any yet I will use this guide to setup V7 this weekend when i'm back home
  Rig1 x58 classified 3 I7 950 @4.0 3 GTX680SC Rig2 X79 Dark I7-4820K @ 4.5 3 gtx 670 FTW 1 gtx 660 ftw sig 2
|
jflankford
FTW Member
- Total Posts : 1081
- Reward points : 0
- Joined: 2009/06/27 01:20:25
- Location: Colorado Springs
- Status: offline
- Ribbons : 4
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/03 00:17:58
(permalink)
OLD-SLO-GAMER
No wonder I am sliding backwards in the ranks I have been waiting for QRB on tracker. I have 7 gpus running 24/7 and no QRB on any yet I will use this guide to setup V7 this weekend when i'm back home
Hi OSG  I seen a jump in your ppd for 2 Dec. Does that mean you have it installed and working? Hope so!
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/03 03:37:00
(permalink)
|
AlexisRO
FTW Member
- Total Posts : 1920
- Reward points : 0
- Joined: 2008/12/22 09:28:18
- Location: Bucharest Romania
- Status: offline
- Ribbons : 9
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/03 05:57:50
(permalink)
Thanks for the guide, especially the vid!
I tried yesterday to follow some instructions based on screenshots but of course i was doing it wrong. It's weird coming from Jedi's Tracker to this v7 client...
System: 7820X - MSI X299 Carbon AC - G.Skill 32Gb TridentZ 3200 - EVGA 1080 Ti - 500 Gb Samsung 970 EVO , 2Tb Crucial MX500, 2Tb, 3Tb, 4Tb Seagate - Seasonic 1000W Prime - Creative Sound Blaster Z - Windows 10 Pro 64 - Phanteks Enthoo Primo - Edifier S530D - Acer Predator XB271HU (1440p) Watercooling loop: Heatkiller CPU - EK 1080 Ti - Swiftech MCP 655 with EK X-Top v2 - XSPC reservoir - Alphacool 480 x2  
|
OLD-SLO-GAMER
FTW Member
- Total Posts : 1286
- Reward points : 0
- Joined: 2008/05/07 16:31:13
- Location: Miles City Montana
- Status: offline
- Ribbons : 3
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/03 06:18:18
(permalink)
jflankford
OLD-SLO-GAMER
No wonder I am sliding backwards in the ranks I have been waiting for QRB on tracker. I have 7 gpus running 24/7 and no QRB on any yet I will use this guide to setup V7 this weekend when i'm back home
Hi OSG
I seen a jump in your ppd for 2 Dec. Does that mean you have it
installed and working? Hope so!
All setup and running having some trouble swiching back to core 2.22 for my fermis but about half the WU are 8057 now
Rig1 x58 classified 3 I7 950 @4.0 3 GTX680SC Rig2 X79 Dark I7-4820K @ 4.5 3 gtx 670 FTW 1 gtx 660 ftw sig 2
|
Sleinous
EVGA Forum Moderator
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/03 07:17:50
(permalink)
Just as a reminder, anyone that gets stuck, just shoot me a PM.
|
AzN-SoLjA
CLASSIFIED ULTRA Member
- Total Posts : 7982
- Reward points : 0
- Joined: 2011/06/18 11:45:02
- Location: Kent, WA - Use My Affiliate Code: 3MHCIBME48
- Status: offline
- Ribbons : 14
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/15 11:21:46
(permalink)
I musta missed some sort of an update somewhere but I haven't seen the QRB's in a long time now, just 807* 3.8kers. Saw a few posts saying to remove the beta flags now?
| EVGA Z68 FTW | EVGA GTX 780 Ti SC 3GB | EVGA GTX 1080 Ti FTW3 | Custom EK Water Loop | Red Harbinger Cross Desk
| i7 2600K @ 4.5GHz @ 1.24v | Corsair 16GB Vengeance | Corsair Neutron 256GB SSD | Corsair AX850 | Lamptron FC5V3 | ASUS VE278 27" |
| Creative Inspire T6160 5.1 & X-Fi Fatal1ty 7.1 Champ | Razer Marauder & Spectre & Tiamat 7.1 | Affiliate Code: 3MHCIBME48 | Associate Code: 08HWLPJXE0O5MPM
|
Xavier Zepherious
CLASSIFIED ULTRA Member
- Total Posts : 6746
- Reward points : 0
- Joined: 2010/07/04 12:53:39
- Location: Medicine Hat ,Alberta, Canada
- Status: offline
- Ribbons : 16
Re:Helping Getting You QRB-Ready - This Weekend Only!
2012/12/15 11:29:29
(permalink)
8057 went internal - to finish it off
QRB is coming - there are issues to be resolved at Stanford before implementation
|