BringerOfSpring
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/12/01 19:49:04
- Status: offline
- Ribbons : 0
I just received and built out my rig. I went with Corsair Dominator Platinum DDR5. Noticing that ICUE software won't recognize the ram so I can't adjust the RGB, anyone else having a similar issue? Also, there was a setting that was in bios called SPD Write that can be adjusted on ASUS that would fix the issue but I was unable to find a similar setting in the EVGA bios. Any suggestions or information in regards to this would be helpful! Also, When I power down the PC, the RGB Stays active on the RAM while the machine is off.
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: z690 KingPin DDR5 Issue
2022/03/29 11:50:44
(permalink)
My Trident Z5 stays on too, however the gskill rgb app works fine for me on my dark so can't help with the icue issue.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
rblaes_99
FTW Member
- Total Posts : 1951
- Reward points : 0
- Joined: 2007/02/17 06:25:20
- Status: offline
- Ribbons : 15
Re: z690 KingPin DDR5 Issue
2022/03/29 13:16:37
(permalink)
icue 3 or 4? i thought it worked in 4.
|
BringerOfSpring
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/12/01 19:49:04
- Status: offline
- Ribbons : 0
Re: z690 KingPin DDR5 Issue
2022/03/29 13:22:52
(permalink)
Just re-installed it to be sure. I installed ICue 4. the ram just shows up there as DRAM.
|
zippytek
FTW Member
- Total Posts : 1185
- Reward points : 0
- Joined: 2020/10/06 17:25:35
- Status: offline
- Ribbons : 9
Re: z690 KingPin DDR5 Issue
2022/03/29 14:00:15
(permalink)
☼ Best Answerby BringerOfSpring 2022/03/29 14:22:28
BringerOfSpring
I just received and built out my rig. I went with Corsair Dominator Platinum DDR5. Noticing that ICUE software won't recognize the ram so I can't adjust the RGB, anyone else having a similar issue? Also, there was a setting that was in bios called SPD Write that can be adjusted on ASUS that would fix the issue but I was unable to find a similar setting in the EVGA bios. Any suggestions or information in regards to this would be helpful! Also, When I power down the PC, the RGB Stays active on the RAM while the machine is off.
This setting is called "DRAM SPD Write" and you can find it on the MEMORY tab in the bios at the very bottom of timings and just above "Memory Channel configuration" etc. Will this solve your RGB controller issue? I can't say for sure, but that setting is there in the bios so please check it out and let us know how it goes. GL!
|
BringerOfSpring
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/12/01 19:49:04
- Status: offline
- Ribbons : 0
Re: z690 KingPin DDR5 Issue
2022/03/29 14:23:04
(permalink)
zippytek
BringerOfSpring
I just received and built out my rig. I went with Corsair Dominator Platinum DDR5. Noticing that ICUE software won't recognize the ram so I can't adjust the RGB, anyone else having a similar issue? Also, there was a setting that was in bios called SPD Write that can be adjusted on ASUS that would fix the issue but I was unable to find a similar setting in the EVGA bios. Any suggestions or information in regards to this would be helpful! Also, When I power down the PC, the RGB Stays active on the RAM while the machine is off.
This setting is called "DRAM SPD Write" and you can find it on the MEMORY tab in the bios at the very bottom of timings and just above "Memory Channel configuration" etc. Will this solve your RGB controller issue? I can't say for sure, but that setting is there in the bios so please check it out and let us know how it goes. GL!
That fixed it! Thank you so much. I missed it when I was looking through the list. I switched it from Disabled to Enabled then it showed up in my ICue. Random.
|
zippytek
FTW Member
- Total Posts : 1185
- Reward points : 0
- Joined: 2020/10/06 17:25:35
- Status: offline
- Ribbons : 9
Re: z690 KingPin DDR5 Issue
2022/03/29 14:50:49
(permalink)
Glad to hear! It’s a solid board but with so many settings it def takes some poking around to find everything. Enjoy :)
|
redteamgo
SSC Member
- Total Posts : 798
- Reward points : 0
- Joined: 2013/11/16 13:20:08
- Status: offline
- Ribbons : 3
Re: z690 KingPin DDR5 Issue
2022/08/26 06:42:17
(permalink)
tresnugget
My Trident Z5 stays on too, however the gskill rgb app works fine for me on my dark so can't help with the icue issue.
Thank you for calling this out. I also have gskill blades and their program worked perfectly, doesn't even need to be open in the background after initial settings
CPU: Intel 12900K EK 1700 Quantum Mag AcetelGPU: EVGA 3090 KPHCMB: EVGA Z690 DarkPSU: EVGA SuperNOVA 1600 P+Memory: G.SKILL Z5 6600mhz XMP3NVME: Samsung 980 Pro Gen 4 1TB, Gen 3 970 1TBCooling: MO-RA3 420 P/P 8x200mm Noctua HS PWM, Dual D5Case: Fractal Design Define 7 MOD Rigs!!!
|
rdrines
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2009/10/12 17:17:34
- Status: offline
- Ribbons : 0
Re: z690 KingPin DDR5 Issue
2022/08/27 15:46:45
(permalink)
I haven''t seen enough memory performance for my Z690 Classified's ability to support 4x32GB sticks.
My Z690 is for development data file analysis methods. The amount data to process is huge and will need ram space to process the files listed and record the results.
My ideal is to see if (4x32GB=128) G-Skill 5600 XMP sticks will enable larger test than (2x32GB=64) G-Skill 5600 XMP sticks.
In reading some of the support messages in "Tom's Hardware" that is dependent upon forum help, it seems some of the Z690 motherboards won't perform well when all four slots have a ram stick.
Can you offer some insights into the size of the memory you installed and if you have all four ram slots filled, how the Z690 handled that memory strategy?
If you know what else I might need, adding that info to this post would be helpful.
|
Black_Hawx1
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2016/02/17 23:33:28
- Status: offline
- Ribbons : 0
Re: z690 KingPin DDR5 Issue
2022/10/01 22:15:04
(permalink)
zippytek
BringerOfSpring
I just received and built out my rig. I went with Corsair Dominator Platinum DDR5. Noticing that ICUE software won't recognize the ram so I can't adjust the RGB, anyone else having a similar issue? Also, there was a setting that was in bios called SPD Write that can be adjusted on ASUS that would fix the issue but I was unable to find a similar setting in the EVGA bios. Any suggestions or information in regards to this would be helpful! Also, When I power down the PC, the RGB Stays active on the RAM while the machine is off.
This setting is called "DRAM SPD Write" and you can find it on the MEMORY tab in the bios at the very bottom of timings and just above "Memory Channel configuration" etc. Will this solve your RGB controller issue? I can't say for sure, but that setting is there in the bios so please check it out and let us know how it goes. GL!
Thanks, it works wonders for my memory! now I can change the rgb :)
MONITOR: MSI 27" IPS MAG274R2 G-Sync 165Hz 1080PCASE: EVGA DG 77 BLACK -MODDEDMB: EVGA Z690 CLASSIFIED (BIOS 2.12)CPU: i5 12400 5.3 GHZ overclocked via BCLKAIO: Asus ROG Ryuo 120 -MODDEDRAM: 32 Gb ram Corsair DOMINATOR DDR5 5200 MhzSSD NVMe: WD SN850 NVMe 500 Gb 7000 mb/s (+500 x2 SATA3 SSD)GPU: EVGA RTX 3060 12 Gbs XCPSU: EVGA P6 SUPERNOVA 1000W PLATINUM MOUSE: G Pro X SuperlightKEYBOARD: G915
build: https://i.imgur.com/s56ZcCq.jpeg
|