EVGA

Z390 dark and Intel ethernet connection I219-V driver issue

Author
dante`afk
New Member
  • Total Posts : 74
  • Reward points : 0
  • Joined: 7/26/2016
  • Status: offline
  • Ribbons : 0
Friday, December 13, 2019 1:49 PM (permalink)
Heya
 
did a fresh windows installation, this device however shows a yellow exclamation mark and cannot be started (code 10). I've installed all drivers from the z390 dark page, and also used the intel driver update utility. Did not fix it.
 
any ideas?

12900k - asus z690 APEX - 32gb 6400 cl30
3090 FE - phanteks 719 - corsair ax1600i
dual mora3 420 - 2x d5, 2x ddc - samsung neo g9 49" 240hz - 2x 27" 120hz
#1

4 Replies Related Threads

    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Z390 dark and Intel ethernet connection I219-V driver issue Friday, December 13, 2019 5:48 PM (permalink)
    Sounds like you may have a hardware issue.
    #2
    kagula323
    New Member
    • Total Posts : 56
    • Reward points : 0
    • Joined: 10/9/2010
    • Status: offline
    • Ribbons : 0
    Re: Z390 dark and Intel ethernet connection I219-V driver issue Friday, December 13, 2019 11:16 PM (permalink)
    reflash bios ... it seems to have fixed this issue for some members
    #3
    MrEWhite
    Superclocked Member
    • Total Posts : 216
    • Reward points : 0
    • Joined: 10/24/2013
    • Status: offline
    • Ribbons : 0
    Re: Z390 dark and Intel ethernet connection I219-V driver issue Sunday, December 15, 2019 8:34 PM (permalink)
    Sajin
    Sounds like you may have a hardware issue.

    It's not a hardware issue, it's an issue with the BIOS.
    https://forums.evga.com/Z...-m3003842.aspx#3006684
    #4
    Neutro
    iCX Member
    • Total Posts : 436
    • Reward points : 0
    • Joined: 7/19/2018
    • Location: France
    • Status: offline
    • Ribbons : 12
    Re: Z390 dark and Intel ethernet connection I219-V driver issue Saturday, November 06, 2021 4:07 PM (permalink)
    I had the same problem with my Z370 FTW today out of nowhere. Yesterday everything was working fine, turned off my PC. Today when i turned on my PC LAN wouldn't work with code 10.
     
    Tried clear CMOS => same
     
    Tried resetting the LAN PXE EEPROM using intel utility like described here (https://forum.thinkpads.com/viewtopic.php?t=132927) => the LAN was working again but only at 10mbps and would fail after a few seconds.
     
    Last resort i downloaded the same bios again, flashed it and now everything is back to normal.

    9900k / EVGA Z370 FTW / 4070 FE / Corsair DDR4 3200 Mhz 16GB / Phanteks P600S / EVGA Supernova 1200 P2 / WD SN850 1 TB / Asus PG248Q - pix
    #5
    Jump to: