mith36
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 11/19/2020
- Status: offline
- Ribbons : 0
Saturday, January 16, 2021 8:45 PM
(permalink)
EVGA X1 Precision prompted me to update my firmware when I booted up my computer today, and so I did. Shortly after completing this update, I tried to watch a video but then my computer froze to black screen then rebooted. Upon rebooting, I now see artifacts randomly appearing. Nothing else has changed besides installing the new firmware. Can I revert to the previous firmware/anyone else have these problems?
Attached Image(s)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Saturday, January 16, 2021 8:50 PM
(permalink)
|
joshl77
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 6/30/2012
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 3:16 PM
(permalink)
I just updated and have not noticed any problems yet on a 3080 XC3 Ultra Gaming. Will post again if I encounter anything.
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 4:57 PM
(permalink)
joshl77
I just updated and have not noticed any problems yet on a 3080 XC3 Ultra Gaming. Will post again if I encounter anything.
Thanks for posting that joshl77. I have been afraid to install the new PX1 after what it did to poor mith36's card. I'll admit I'm still kind of afraid it will bork my RTX 3070 FTW3.:(
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 5:02 PM
(permalink)
mith36
EVGA X1 Precision prompted me to update my firmware when I booted up my computer today, and so I did. Shortly after completing this update, I tried to watch a video but then my computer froze to black screen then rebooted. Upon rebooting, I now see artifacts randomly appearing. Nothing else has changed besides installing the new firmware.
Can I revert to the previous firmware/anyone else have these problems?
There should be a way to install the earlier controller software back on your card mith36. Try contacting EVGA support on Monday and see if they can set you up with it.
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 7/14/2017
- Location: Europe
- Status: offline
- Ribbons : 2
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 5:36 PM
(permalink)
I think they didnt update frimware they would put in change log. Its old frimware from dec 2020.
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 5:41 PM
(permalink)
kacan22
I think they didnt update frimware they would put in change log. Its old frimware from dec 2020.
Well, I guess I can try updating to the new PX1 and see if it tries to update my software.
post edited by dlbsyst - Sunday, January 17, 2021 5:46 PM
|
_Gir_
iCX Member
- Total Posts : 333
- Reward points : 0
- Joined: 2/3/2016
- Status: offline
- Ribbons : 2
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 5:59 PM
(permalink)
mith36
EVGA X1 Precision prompted me to update my firmware when I booted up my computer today, and so I did. Shortly after completing this update, I tried to watch a video but then my computer froze to black screen then rebooted. Upon rebooting, I now see artifacts randomly appearing. Nothing else has changed besides installing the new firmware.
Can I revert to the previous firmware/anyone else have these problems?
Which card do you have?
|
Carmen813
Superclocked Member
- Total Posts : 202
- Reward points : 0
- Joined: 3/26/2012
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 7:17 PM
(permalink)
No issues here. Make sure fans are running. All this does is update fan and rgb firmware.
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 11:47 PM
(permalink)
Well, I installed the new PX1 and it said I needed to update my firmware so I did. I have to admit I was nervous something would go wrong but luckily it went smooth.:)
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Sunday, January 17, 2021 11:58 PM
(permalink)
kacan22
I think they didnt update frimware they would put in change log. Its old frimware from dec 2020.
I definitely got new firmware. My original firmware was 4.01.05. After the update I have 4.01.06.:)
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 7/14/2017
- Location: Europe
- Status: offline
- Ribbons : 2
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 1:00 AM
(permalink)
dlbsyst
kacan22
I think they didnt update frimware they would put in change log. Its old frimware from dec 2020.
I definitely got new firmware. My original firmware was 4.01.05. After the update I have 4.01.06.:)
huh thanks for update. I think i wont update firmware i just have a bad feeling smth will go wrong cos my cards work fine. Btw did you install 1.1.4 in dec with frimware? I will check tomorrow on my desktop pc im currently on notebook. Edit: Last frimware update was 6 Jan 2021 and they didnt post in change log. I just checked hex file for ftw3.
post edited by kacan22 - Monday, January 18, 2021 1:34 AM
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 1:38 AM
(permalink)
kacan22
dlbsyst
kacan22
I think they didnt update frimware they would put in change log. Its old frimware from dec 2020.
I definitely got new firmware. My original firmware was 4.01.05. After the update I have 4.01.06.:)
huh thanks for update. I think i wont update firmware i just have a bad feeling smth will go wrong cos my cards work fine.
Btw did you install 1.1.4 in dec with frimware?
I will check tomorrow on my desktop pc im currently on notebook.
Yeah, I installed PX1 1.1.4 but it didn't update my firmware. It appears my card already had the latest firmware installed when I received it from EVGA in December. Trust me I was nervous updating the firmware.:) My card has been flawless and I was so worried something would go wrong when I updated. If you don't feel comfortable you probably shouldn't update because there is always some level of risk.
|
Nikos4Life
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 11/30/2014
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 10:01 AM
(permalink)
Hi there!
Could anyone point me to the latest downloadable version of X1 Precision, please?
Best,
Nikos
|
Dark360
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 11/30/2009
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 10:14 AM
(permalink)
Intel i5 3570K@ 4.2GHz Noctua NH-D14 ASUS P8Z68-V PRO 8GB Corsair Vengeance 1866MHz EVGA GTX 570 1.25GB SC /w Backplate @ 810/1620MHz cores Raid 0: 2x Vertex 3 120GB SSD Storage: MAXTOR 500GB 7200 RPM HDD Antec TruePower Quattro 850W Modular CoolerMaster HAF X Win 8 x64
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 3/8/2007
- Status: offline
- Ribbons : 17
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 11:12 AM
(permalink)
Updated to latest yesterday along with firmware update, all went smoothly.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Morganessa
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 12/2/2020
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 11:55 AM
(permalink)
I was prompted to update firmware with this release. So far no crashes...
|
Saltgrass
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 3/20/2010
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 12:08 AM
(permalink)
If you are still having a problem with the card, you might try shutting the system down and turning off the power to the power supply. Leave it for a few minutes and restore the power supply then restart your system.
I just fixed a very loud fan noise yesterday by doing this. It might clear something out and help the card..
******************** W11 x64 Asus Maximus Hero XIII Intel i9 11900K EVGA RTX 3090 FTW Ultra 32 GB G.Skill 4000.
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 12:19 AM
(permalink)
|
Nikos4Life
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 11/30/2014
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 1:17 PM
(permalink)
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 1:24 PM
(permalink)
Nikos4Life
dlbsyst
Nikos4Life
Hi there!
Could anyone point me to the latest downloadable version of X1 Precision, please?
Best,
Nikos
https://www.evga.com/precisionx1/
Thanks 🙌🏻
Your welcome.:)
|
Shrike
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 11/3/2020
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 1:50 PM
(permalink)
The latest firmware reduced the power consumption - now i have 380-390 watt instead of 415-430 in Cyberpunk'77. Have someone the same effect after update?
|
ComicBookAssassin
New Member
- Total Posts : 77
- Reward points : 0
- Joined: 2/20/2019
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 2:06 PM
(permalink)
Shrike
The latest firmware reduced the power consumption - now i have 380-390 watt instead of 415-430 in Cyberpunk'77. Have someone the same effect after update?
what bios are you running as out of the box I didn’t think they went up to 400. Last night it said 1.1.4 was the latest version when did 1.1.5 get release?
Motherboard- Asrock 570x Phantom Gaming, Ram- Corsair Vengeance 2X 16Gb @3400Mhz, Cpu- AMD Ryzen 3600x, Power Supply- Evga 850 Platinum, Graphics Card- Evga 3090 FTW3 Ultra V2 Black Lips, WinOS- Samsung M.2 250, Game Storage- Corsair 1TB 4.0 NVME, Additional storage- X3 250GB Samsung SSD’s, Cooling- Noctua D15 Twin Tower, Case- Lian Li Lancool2 with Mesh Kit
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 3:28 PM
(permalink)
I have to say I'm not really happy with the new firmware contained in the current PX1. It seemed to make my fans much louder. I can now hear a loud low hum coming from them that I'm pretty sure wasn't there before. It is especially bad when when my fans are running at 70% speed. The fans just seem overall louder now. Not happy. If EVGA can post the previous firmware because I would like to install it. I have the RTX 3070 FTW3 Ultra.
post edited by dlbsyst - Monday, January 18, 2021 3:31 PM
|
Intoxicus
iCX Member
- Total Posts : 406
- Reward points : 0
- Joined: 10/24/2009
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 3:44 PM
(permalink)
Look at your Boost Curve and see if you have 4 or more voltage steps at the same core clock.
"Humans are not rational animals, humans are rationalizing animals." -Robert A Heinlein
|
dlbsyst
iCX Member
- Total Posts : 311
- Reward points : 0
- Joined: 1/15/2011
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Monday, January 18, 2021 4:06 PM
(permalink)
Intoxicus
Look at your Boost Curve and see if you have 4 or more voltage steps at the same core clock.
I don't understand Intoxicus. Can you elaborate?
|
pixelcowboy
Superclocked Member
- Total Posts : 213
- Reward points : 0
- Joined: 6/17/2017
- Status: offline
- Ribbons : 1
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Tuesday, January 19, 2021 3:01 AM
(permalink)
I just had a black screen hang with the latest firmware, which I've never had before, after updating today. Any way to roll back this firmware?
|
sunlight0
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 1/19/2021
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Tuesday, January 19, 2021 10:47 AM
(permalink)
|
Shrike
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 11/3/2020
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Wednesday, January 20, 2021 11:29 AM
(permalink)
ComicBookAssassin
Shrike
The latest firmware reduced the power consumption - now i have 380-390 watt instead of 415-430 in Cyberpunk'77. Have someone the same effect after update?
what bios are you running as out of the box I didn’t think they went up to 400. Last night it said 1.1.4 was the latest version when did 1.1.5 get release?
I use XOC 450Wt
|
ComicBookAssassin
New Member
- Total Posts : 77
- Reward points : 0
- Joined: 2/20/2019
- Status: offline
- Ribbons : 0
Re: EVGA X1 Precision new firmware [01/16/2021] leading to instability
Wednesday, January 20, 2021 11:40 AM
(permalink)
Shrike
ComicBookAssassin
Shrike
The latest firmware reduced the power consumption - now i have 380-390 watt instead of 415-430 in Cyberpunk'77. Have someone the same effect after update?
what bios are you running as out of the box I didn’t think they went up to 400. Last night it said 1.1.4 was the latest version when did 1.1.5 get release?
I use XOC 450Wt
I’m running standard bios and I don’t think I want to suck more juice to get more power, but with this update the auto scan has said i can go from the previous +85 scan to the new +126 Scan and still keep the +200 Mem OC which is great for me only issue it’s introduced is the colour sometimes goes back to rainbow phewk and the fans ramp up and down
Motherboard- Asrock 570x Phantom Gaming, Ram- Corsair Vengeance 2X 16Gb @3400Mhz, Cpu- AMD Ryzen 3600x, Power Supply- Evga 850 Platinum, Graphics Card- Evga 3090 FTW3 Ultra V2 Black Lips, WinOS- Samsung M.2 250, Game Storage- Corsair 1TB 4.0 NVME, Additional storage- X3 250GB Samsung SSD’s, Cooling- Noctua D15 Twin Tower, Case- Lian Li Lancool2 with Mesh Kit
|