klawhammer
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 10/27/2014
- Status: offline
- Ribbons : 0
Tuesday, February 28, 2023 4:48 AM
(permalink)
These are my temps for my (new to me) 3090 FTW3 Ultra with 500w bios has the hybrid cooler on it, but this was added, did not come hybrid 
post edited by klawhammer - Tuesday, February 28, 2023 4:51 AM
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Asking about my temps
Tuesday, February 28, 2023 5:15 AM
(permalink)
☼ Best Answerby klawhammer Tuesday, February 28, 2023 5:30 AM
Looks like the temps are not moving much which is good. Means you might be able to overclock a bit or not if you just want it to run cool since it’s already a beast of a card.
|
klawhammer
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 10/27/2014
- Status: offline
- Ribbons : 0
Re: Asking about my temps
Tuesday, February 28, 2023 5:30 AM
(permalink)
Hoggle
Looks like the temps are not moving much which is good. Means you might be able to overclock a bit or not if you just want it to run cool since it’s already a beast of a card.
Thank you!
|
klawhammer
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 10/27/2014
- Status: offline
- Ribbons : 0
Re: Asking about my temps
Wednesday, March 01, 2023 1:02 PM
(permalink)
I think I may need to repaste and do new pads.. Seems high, keep in mind fan speed is at 100% 61c, 1995mhz 105% power, 459.2w 
post edited by klawhammer - Wednesday, March 01, 2023 1:03 PM
|
HeavyHemi
Omnipotent Enthusiast
- Total Posts : 13887
- Reward points : 0
- Joined: 11/29/2008
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Asking about my temps
Wednesday, March 01, 2023 1:23 PM
(permalink)
klawhammer
I think I may need to repaste and do new pads..
Seems high, keep in mind fan speed is at 100%
61c, 1995mhz 105% power, 459.2w
61C is fine at full load. You're only using a 240mm rad. You'd likely have slightly better temps running push/pull fans on the radiator at a lower RPM for less noise.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Asking about my temps
Wednesday, March 01, 2023 1:28 PM
(permalink)
Low 60s is not a bad temp
---> Almost 20C delta, between GPU & GPU Hot spot .... TIM, contact pressure & levelness could be less than perfect - OR - just Silicon lottery
Did you use the stock thermal pads - AIO kit?
Pads need to be BOTH, the correct thickness & hardness. If pads are too hard this can impact contact pressure - as those GPU mounting screws w/ springs only provide so much pressure
What is your room temp & inside of the case temps?
What Case fans? Number blowing In? Blowing Out? Speed?
---> 3090 FTW ... (non Ti) -- how are you cooling the backplate? Make sure your fan setup gives some movement around the backplate, they get very warm
With GPU-Z look under Sensor Tab --- what is the PerfCap Reason ?
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Asking about my temps
Wednesday, March 01, 2023 8:58 PM
(permalink)
|