EVGA
Prev Thread
Next Thread

Need help with GTX 1060 6gb

Author
Post
Essentials Only Full Version
Gabox90
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 8/6/2017
  • Status: offline
  • Ribbons : 0
Thursday, May 21, 2020 6:50 PM (permalink)
So i download the EVGA Precision x1 and i notice the gpu clock speed is kinda of low? how to fix it and i been strugling with CoD warzone fps

Attached Image(s)

#1

16 Replies Related Threads
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: Need help with GTX 1060 6gb Thursday, May 21, 2020 8:10 PM (permalink)
    Add some fan to keep the card cooler ... preset is for quiet operation ... factory aggressive curve is a nice balance of sound & temps
     
    Push the Temp & Power targets to Max
     
    You Card will only push the MHz the load requires
     
    Run a benchmark software like Time Spy & look at GPU-Z sensor tab to see what the card is doing

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Thursday, May 21, 2020 10:19 PM (permalink)
    What happens when you enable boost lock?


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Thursday, May 21, 2020 11:59 PM (permalink)
    I did some benchmark 
     

     
    Can you check on it? if see any wrong? 
     
    Thanks for the help!
    post edited by Gabox90 - Friday, May 22, 2020 0:10 PM
    #4
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 0:06 PM (permalink)
    Sajin
    What happens when you enable boost lock?



    It uses the same 139 mhz i really dont know if that number is accurate... or it how it should be for this gpu
     

    #5
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 1:16 AM (permalink)
    Sounds like the card may be broken. Have you tried to reinstall the drivers after cleaning them out with display driver uninstaller?


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #6
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 9:00 PM (permalink)
    Sajin
    Sounds like the card may be broken. Have you tried to reinstall the drivers after cleaning them out with display driver uninstaller?




     
    Oh man dont tell me something like that... i just did and the only game that plays with bad graphics is CoD:warzone
    #7
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 9:27 PM (permalink)
    If your card is stuck at 139 mhz in all games the card has a problem.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #8
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 10:18 PM (permalink)
    Sajin
    If your card is stuck at 139 mhz in all games the card has a problem.




    Well thanks for the help guys! i think its fixed for now, since i opened up the case, did a deep cleaning and reset bios, maybe was a setting forcing it down or i dont know... now im back into normal
    #9
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Friday, May 22, 2020 10:34 PM (permalink)



    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #10
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Saturday, May 23, 2020 2:02 AM (permalink)
    OK, looks like there something going with CoD warzone...
     
    Lets start from beginning
     
    I reset my Bios in motherboard (GA-B150M-DS3H)
    PC was running perfect with gpu perfect state
     80-100fps very stable, the shooting was smooth everything going correct
    Next game, while playing in mid game the fps went down to 30 fps and the GPU was not using power and back to 139mhz...
     
    I did reset the bios once again, all perfect couple of games going nice, and then once again...
     
    I dont really know whats going on... but the only game making my gpu do this is CoD warzone... the next photo is a screenshot of GPU-Z when that happened
     
     

    Attached Image(s)

    #11
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Saturday, May 23, 2020 2:16 AM (permalink)
    I'd get another card to test with.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #12
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Saturday, May 23, 2020 2:26 AM (permalink)
    Going to try something in the next week, but ive been reading a lot of problems similar to mine with the gtx1060 and CoD warzone
    #13
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Sunday, May 24, 2020 11:45 PM (permalink)
    Thanks everyone for the help, a guy in nvidia forum gave me some step and now its going great
     

     
    I left the link if someone having the same problem as me, good luck with it!
    #14
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Monday, May 25, 2020 2:21 AM (permalink)
    And the solution was? To make links show on the forums you'll need to put spaces in your links as you don't have enough posts yet to properly link.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #15
    Gabox90
    New Member
    • Total Posts : 9
    • Reward points : 0
    • Joined: 8/6/2017
    • Status: offline
    • Ribbons : 0
    Re: Need help with GTX 1060 6gb Monday, May 25, 2020 2:46 AM (permalink)
     .nvidia.     com/en-us/geforce/forums     /geforce-graphics-cards/5/379901/weird-problem-playing-cod-warzone/
     
    There you go, Clean uninstall the drives with ddu and DC the ethernet, installing the 442.74 Drivers, Restart and try the game, it worked 
    #16
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: Need help with GTX 1060 6gb Monday, May 25, 2020 2:55 AM (permalink)
    Hope it stays fixed.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #17
    Home » All Forums » [Graphics Cards] » All Other EVGA Graphics Cards » Need help with GTX 1060 6gb
    Jump to: