Dritdiver84
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2/20/2020
- Status: offline
- Ribbons : 0
Thursday, February 20, 2020 4:56 PM
(permalink)
Hello all, just bought my 2080ti FTW3 Ultra a few months ago. Recently I've been crashing to desktop while in game for 30min to an hour. I checked the temps for the GPU and it's running hot. Overall temp is 87C for Mem2 and Mem3 its at 91C and 89C. Which I believe is the reason it CTD since it gets above 90C. All the drivers are up-to-date and all my other temps CPU, SSD, ETC... are normal just the GPU that's running hot. Do I have a bad card? or is there something else I can do to lower these temps? The Percision X1 tool shows it only reached a max of 66C and I have the fan's on the aggressive settings. But my HWiNFO64 program show's high temps. My CPU at high load reached 72C and I was able to verify that through the Ryzen Master HWM as well. Not sure why X1 and HWiNFO are showing different temps. I have great airflow I have the top and front panel removed on the case so it's just mesh. Any suggestions, tips, tricks, help would be greatly appreciated. Specs: Case phanteks eclipse p600s, AMD Ryzen 9 3900x, Gigabyte 570x Aorus Xtreme, Assassin III w/2x 120mm fans, EVGA FTW3 Ultra RTX 2080 ti, EVGA Supernova 1000 P2, Sabrent Rocket NVMe 4.0 1GB x2 + one 2TB, GSkill Trident Z Neo 3600 DDR4 16GBx4, 7x Noctua NF-P14s 140mm redux-1500 PWM fans.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Thursday, February 20, 2020 5:01 PM
(permalink)
Welcome to the EVGA Forums
Check temps with GPU-Z
What Mem temps does X1 give ?
You running stock +0 on GPU & RAM ?
What are Power & Temp Limits set to ?
Voltage slider is set where ?
Room Temp ?
Monitor: resolution & refresh rate ?
Case fans 100% ?
Test with the side panel open & a small fan blowing into case
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Dritdiver84
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2/20/2020
- Status: offline
- Ribbons : 0
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Thursday, February 20, 2020 5:29 PM
(permalink)
Check temps with GPU-Z Downloaded now will use it tonight
What Mem temps does X1 give ? 66 C
You running stock +0 on GPU & RAM ? Yes everything is at factory settings brand new build haven't attempted any overclocking.
What are Power & Temp Limits set to ? power slider says 100 and the GPU Temp says 84 Target is 17w 2%
Voltage slider is set where ? default says 719mv
Room Temp ? 60-70's it's winter here.
Monitor: resolution & refresh rate ? 1440p/144hz
Case fans 100% ? Yes when temp get above 63C they reach max. 7x140mm NF-s12B Noctua fans @ 1200RPG @ Max
Test with the side panel open & a small fan blowing into case. Don't own a fan since its cold here and we have ac for the summer lol.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Thursday, February 20, 2020 6:06 PM
(permalink)
Time to check the thermal pads and thermal paste.
|
Dritdiver84
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2/20/2020
- Status: offline
- Ribbons : 0
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Saturday, February 22, 2020 4:25 AM
(permalink)
☼ Best Answerby Cool GTX Saturday, February 22, 2020 4:31 AM
Was the GPU drivers update. After I rolled it back to the previous driver everything worked like normal. No more crashes or high temps.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Saturday, February 22, 2020 4:32 AM
(permalink)
Dritdiver84
Was the GPU drivers update. After I rolled it back to the previous driver everything worked like normal. No more crashes or high temps.
Care to Share those Driver numbers ? Which one was the trouble make & what did you go back to ?
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Dritdiver84
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2/20/2020
- Status: offline
- Ribbons : 0
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Sunday, February 23, 2020 5:58 AM
(permalink)
Cool GTX I rolled it back from the Feb one to the Jan version 441.87.
|
spit051261
SSC Member
- Total Posts : 930
- Reward points : 0
- Joined: 12/26/2019
- Location: Australia
- Status: offline
- Ribbons : 4
Re: 2080 Ti FTW3 Ultra crashing/running hot.
Sunday, February 23, 2020 6:20 AM
(permalink)
The latest one is not good .
Just check out Nvidia forums .
Gaming Rig - Lian Li Dynamic XL, MSI Z490 Godlike, i9 10900k (SP 88) delidded with Rockit IHS, G-Skill 4266 RAM 2X8 , MSI Z Trio 2080ti, Aorus RGB 360 AIO, EVO 2Tb 970 Plus Nvme,1600watt P2, Acer Predator X27 Monitor, K95 Platinum, G502,G560, ST100 RGB, Void RGB Elite.OC Rig - Lian Li T70, Apex XII , i9 10900k (SP 93) delidded with direct die cooling, G-Skill 4000 2X8 Cl15-16-16 RAM , Evga KPE 2080ti, 2 x 1 Tb Evo 970 Plus Nvme, Evga 1600watt P2, EXC 800 Chiller.
|