EVGA
Prev Thread
Next Thread

PX1 Scan

Author
Post
Essentials Only Full Version
kelkel1
SSC Member
  • Total Posts : 601
  • Reward points : 0
  • Joined: 5/18/2019
  • Status: offline
  • Ribbons : 0
Saturday, December 07, 2019 2:24 PM (permalink)
Running the PX1 Scan causes the monitor to lose signal, as if the GPU is shutdown.

Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
https://valid.x86.fr/52sqs5
#1

16 Replies Related Threads
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: PX1 Scan Saturday, December 07, 2019 2:52 PM (permalink)


    got to let it run ... 15 - 25 min ...the GPU is tested to failure as it dials in the Max Stable GPU MHz
     
    Or are you saying it Never finishes & your left with a signal issue ?
     
    Monitor, Resolution & Cable being used is ?

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #2
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Saturday, December 07, 2019 3:08 PM (permalink)
    Cool GTX


    got to let it run ... 15 - 25 min ...the GPU is tested to failure as it dials in the Max Stable GPU MHz
     

     
    So, black screen while PC continues to run is normal?
    Cool GTX
     
    Or are you saying it Never finishes & your left with a signal issue ?

     
    I cannot tell, I have no output on the monitor, only black screen.
     
    Cool GTX
     
    Monitor, Resolution & Cable being used is ?




    LG 32GK650F, 2560x1440, Display port.

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #3
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Saturday, December 07, 2019 3:41 PM (permalink)
    Ran Scan again for about a half an hour.
     
    Same issue; black screen, PC continues to run.

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #4
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: PX1 Scan Saturday, December 07, 2019 3:48 PM (permalink)
    If it Never Comes back (signal) after 30 min ... then I would venture that the self Test (Scan) should have finished
     
    Self test is know to sometimes Fail if you run more than stock OC on your card ... if you + any setting from default .... Scan is Nvidia software

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #5
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Saturday, December 07, 2019 3:52 PM (permalink)
    No overclock.
     
    Only adjustment I made was custom fan settings, basically lowering the temp at which the fans ramp up.

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #6
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: PX1 Scan Saturday, December 07, 2019 4:13 PM (permalink)
    OS ?  Win 7 64-bit or Win 10 64-bit ... if Win 7 that may explain why its failing
     
     
    Does Each PCIe power port on the card have an independent power cord running to your PSU .... do not use the single PCIe cord with 2 ends ?
     
    Scan only tests the GPU OC & Not the RAM OC ... guess you'll have to do it the old fashioned way ... maunual testing
     
    Pick the benchmark of choice Time Spy or Fire Strike ... Use Ultra or what ever the highest free version is
     
    Make 3 runs stock - except system & GPU fans , then make small changes to the GPU clocks & Test .... find the Max Stable OC


    Use GPU-Z to record / watch for your GPU in action & see what is the bottleneck in performance might be

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #7
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Saturday, December 07, 2019 4:43 PM (permalink)
    W7x64.
     
    Not going to fool with it, went back to Afterburner.
     
     

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #8
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Sunday, December 08, 2019 12:25 AM (permalink)
    Afterburner OC scanner also cause the card to lose output, I presume the card is defective?

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #9
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: PX1 Scan Sunday, December 08, 2019 11:54 PM (permalink)
    Probably just the scan pushing the card too far.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #10
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Monday, December 09, 2019 0:09 PM (permalink)
    Sajin
    Probably just the scan pushing the card too far.



    Is that typical?
     
    Is it not supposed to stop when it finds the limit, before it causes the card to malfunction?

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #11
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: PX1 Scan Monday, December 09, 2019 7:56 AM (permalink)
    No it isn't, but I have seen a few people with the same issue.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #12
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Monday, December 09, 2019 8:34 PM (permalink)
    Sajin
    No it isn't, but I have seen a few people with the same issue.



    So, the card is not OK, then?

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #13
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: PX1 Scan Monday, December 09, 2019 8:46 PM (permalink)
    The card is most likely fine.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #14
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Monday, December 09, 2019 11:23 PM (permalink)
    Sajin
    The card is most likely fine.




    "Most likely" does not inspire a sense of great confidence...

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #15
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: PX1 Scan Tuesday, December 10, 2019 0:49 PM (permalink)
    If the card works fine at stock clocks there isn't anything wrong with it.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #16
    kelkel1
    SSC Member
    • Total Posts : 601
    • Reward points : 0
    • Joined: 5/18/2019
    • Status: offline
    • Ribbons : 0
    Re: PX1 Scan Tuesday, December 10, 2019 12:22 AM (permalink)
    Sajin
    If the card works fine at stock clocks there isn't anything wrong with it.

    OK.

    Z390 DARK, 9900K, 2080 FTW3 ULTRA, GSKILL 4500, 960EVO M.2
    https://valid.x86.fr/52sqs5
    #17
    Home » All Forums » [Graphics Cards] » EVGA Precision X1 » PX1 Scan
    Jump to: