Edward_Teach
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2016/08/12 00:17:03
- Status: offline
- Ribbons : 0
Morning everyone, I'm hoping that someone on here can help me as I am getting different answers from Evga technical support. Can someone please tell me what the thickness is of thermal pads used on the 1080 Ti FTW3? So far one person from technical support has told me that 1mm pads are all that is needed, another said that to use 1.5mm thick pads on the whole card and an email response gave me the dimensions for two of the thermal pads on the card and listed one of them at 2mm thickness. I have tried measuring them with a caliper but my caliper is sadly not that accurate and its hard to get a read off of spongy material. Is there a data sheet somewhere that someone can point me to or does someone on here know the answer to this? Thanks in advance for the help.
|
Neutro
iCX Member
- Total Posts : 436
- Reward points : 0
- Joined: 2018/07/19 15:31:31
- Location: France
- Status: offline
- Ribbons : 12
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/09 09:08:52
(permalink)
9900k / EVGA Z370 FTW / 4070 FE / Corsair DDR4 3200 Mhz 16GB / Phanteks P600S / EVGA Supernova 1200 P2 / WD SN850 1 TB / Asus PG248Q - pix
|
Edward_Teach
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2016/08/12 00:17:03
- Status: offline
- Ribbons : 0
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/09 10:16:38
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/09 10:36:10
(permalink)
|
Edward_Teach
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2016/08/12 00:17:03
- Status: offline
- Ribbons : 0
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/09 11:06:58
(permalink)
That link is for the 1080/1070 for what i think is the thermal pad mod that Evga had to take care of. I could be wrong but it does not say 1080 Ti anywhere.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/09 11:14:40
(permalink)
Edward_Teach
That link is for the 1080/1070 for what i think is the thermal pad mod that Evga had to take care of. I could be wrong but it does not say 1080 Ti anywhere.
They are the Same Size
|
Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/10 10:19:39
(permalink)
☼ Best Answerby Cool GTX 2019/06/10 11:05:19
There is no simple answer to the thickness of the pads on the GTX1080 Ti FTW3 model, as they are not all one thickness.
- The ones on the underside of the baseplate, which contact components on the PCB, are all 1.25mm in thickness.
- The ones on the top of the baseplate, which contact the heatsink are 0.75mm and 0.25mm, 2 of each.
- The ones on the backplate are all 2.0mm thick except for the square one on the back of the GPU die, which is 0.75mm thick.
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/10 10:44:58
(permalink)
EVGATech_RayH
There is no simple answer to the thickness of the pads on the GTX1080 Ti FTW3 model, as they are not all one thickness.
- The ones on the underside of the baseplate, which contact components on the PCB, are all 1.25mm in thickness.
- The ones on the top of the baseplate, which contact the heatsink are 0.75mm and 0.25mm, 2 of each.
- The ones on the backplate are all 2.0mm thick except for the square one on the back of the GPU die, which is 0.75mm thick.
Now that seems a little confusing Thermal pads are usually only available [Retail] in 0.5mm increments 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm .......
|
Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/10 11:00:43
(permalink)
☄ Helpfulby Cool GTX 2019/06/10 11:05:23
We use .25mm increments for some pads, going up to the next size (.25mm), if that is what is available to purchase, will not cause any issues.
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/10 11:05:14
(permalink)
Thank you for the Clarity 
|
Sneha1
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2019/06/12 03:21:56
- Status: offline
- Ribbons : 0
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/06/12 03:46:53
(permalink)
Maybe these are 1.5mm thick..
|
Lefrinn
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2019/10/15 23:34:58
- Status: offline
- Ribbons : 0
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/11/27 08:23:47
(permalink)
EVGATech_RayH
There is no simple answer to the thickness of the pads on the GTX1080 Ti FTW3 model, as they are not all one thickness.
- The ones on the underside of the baseplate, which contact components on the PCB, are all 1.25mm in thickness.
- The ones on the top of the baseplate, which contact the heatsink are 0.75mm and 0.25mm, 2 of each.
- The ones on the backplate are all 2.0mm thick except for the square one on the back of the GPU die, which is 0.75mm thick.
Hello. Can i use for underside of the baseplate which contact components on the PCB - termal pads 1.5mm thickness? Idont see any 1.25mm on markets..... Ths
|
Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: 1080 Ti FTW3 thermal Pad Thickness
2019/11/27 11:22:29
(permalink)
Yes, 1.5mm can be used in place of 1.25mm pads on the FTW3 card
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|