Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Thursday, January 24, 2019 12:41 AM
(permalink)
Hello everyone,
To begin, Please Apologyze for my english, i'm french
I just changed my video card. I had a ZOTAC 1080 Ti and bought an EVGA rtx 2080 ti black edition I only have two games Destiny 2 and PUBG I have between 80 and 110 FPS with my old card. And since I installed the new I turn between 20 and 30 FPS. I uninstalled the drivers with DDU and installed the latest drivers. unfortunately, I still have the same problem. The game runs at 25 FPS and so there is a big latency. My screen is a 100htz
Did you have the same problem?
Thank you
Regards
|
nofearek9
iCX Member
- Total Posts : 436
- Reward points : 0
- Joined: 11/16/2010
- Location: Cyprus
- Status: offline
- Ribbons : 8
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 12:45 AM
(permalink)
what are the rest specs of your PC ?
Asus Rampage IV Black Edition,Intel Xeon e5-1680v2@4,5Ghz(36x125),Corsair XMS3 64GB DDR3(8x8)(2000Mhz),Samsung 980 PRO 512GB,EVGA GeForce RTX 2070 XC GAMING 8GB,Lian Li PC-60FNWB ,Corsair HX1000 PSU,Noctua NH-D15 .Asus Rampage III Gene,Intel Xeon X5660@ 4,5ghz,Corsair XMS3 48GB DDR3(6x8),Samsung 950 PRO 256GB,EVGA 1060 3GB SSC.Register your evga products Buy evga products with discount
|
Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 1:06 PM
(permalink)
sorry
i have 8700K cpu
ram : 16GO
power supply : corsair 80+ 850w
display : PG348Q
|
Grobiatti
New Member
- Total Posts : 74
- Reward points : 0
- Joined: 11/11/2005
- Status: offline
- Ribbons : 1
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 1:19 PM
(permalink)
I will check later tonight when I get home. I have destiny 2 but haven't played it in a while. I do play BFV and it stays at
a constant 144fps @ 1440 in max fidelity mode.
Same with Diablo 3, but hell my cell phone can run Diablo also so it's not a true benchmark.
Gigabyte Z390 Ultra Intel i9 9900k32 GB (4x8GB) Gskill RGB 3200 1 eVGA GTX 2080 Ti Black3 x1Tb SSD (Data) 2 NVME 250Gb (Boot) eVga G3 1000w PSU Windows 10 Pro x64 Custom water cooling loopDefine R6 CaseMy Heatware [link=http://www.heatware.com/eval.php?id=67526]http://www.hea
|
Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 1:36 PM
(permalink)
@grobiatti thank you
With my old card (1080 ti) with the same configuration and same games
I loose between 60 and 80 fps
Isn't normal with this new card
i don't know if it's hardware or software
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 4:56 PM
(permalink)
Putting the old card back in restores your fps back to normal?
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 4:58 PM
(permalink)
What are your temps and clocks when you're gaming @ low FPS?
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 4:58 PM
(permalink)
|
Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 5:03 PM
(permalink)
temp : 45° and 57°c when i launch gpu test and clock 300 Mhz
the card stay at 300 mhz
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 5:10 PM
(permalink)
☼ Best Answerby Yanoudak Friday, January 25, 2019 3:20 PM
Try locking your voltage/frequency to the 1.2mv range inside msi afterburners voltage/frequency curve editor. Locking your voltage/frequency to the 1.2mv range will force the card to run at a constant voltage/frequency just like kboost. You can access msi afterburners voltage/frequency curve editor by press ctrl+f after opening afterburner. Press ctrl+l after selecting the last point on the graph to lock the range. Hit the check mark button on the main screen to apply the lock. Your card should boost up to the frequency show inside the voltage/frequency curve editor.  Should look like this if you've done it correctly...  Note: Your cards voltage won't actually run at 1.2mv. The voltage will actually run at default voltage.
|
Grobiatti
New Member
- Total Posts : 74
- Reward points : 0
- Joined: 11/11/2005
- Status: offline
- Ribbons : 1
Re: RTX 2080 TI black edition
Thursday, January 24, 2019 10:06 PM
(permalink)
So I just played some destiny 2 , and FPS at 4k highest settings the game is running around 90 to 105 fps
@1440p i'm locked at 144fps. I have to guess there is something up with your drivers most likely. or the card isn't boosting properly. but still a software issue somewhere.
Gigabyte Z390 Ultra Intel i9 9900k32 GB (4x8GB) Gskill RGB 3200 1 eVGA GTX 2080 Ti Black3 x1Tb SSD (Data) 2 NVME 250Gb (Boot) eVga G3 1000w PSU Windows 10 Pro x64 Custom water cooling loopDefine R6 CaseMy Heatware [link=http://www.heatware.com/eval.php?id=67526]http://www.hea
|
Yanoudak
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 1/24/2019
- Status: offline
- Ribbons : 0
Re: RTX 2080 TI black edition
Friday, January 25, 2019 3:20 PM
(permalink)
Hello Guys,
Sorry for the response time.
I check with msi afterburner but i can't modify the voltage (option is grey)
i reset completly my OS (Windows 10)
I install just the minimum, same problem
I'm not sure but i swap the alimentation cable for the GPU (6 pin) and after that the frequency start to 300 at 1350.
So my problem is fix :)
It's really weird, but thank you everyone.
Have a nice day
Bye bye ;)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2080 TI black edition
Friday, January 25, 2019 3:37 PM
(permalink)
Glad it got resolved. Sounds like it was either a bad cable seat or a bad cable in general.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: RTX 2080 TI black edition
Friday, January 25, 2019 3:49 PM
(permalink)
GTXJackBauer
Glad it got resolved. Sounds like it was either a bad cable seat or a bad cable in general.
+1 push on the wires & not the plastic adapter, sometimes the wires will not fully seat - instead they get pushed into the plastic if the pin fit does not align or is too tight
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 TI black edition
Friday, January 25, 2019 5:19 PM
(permalink)
|