tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Hi. Today i checked my event viewer and found some weird errors in 21.01.2018 : System Warning 21/01/2018 A corrected hardware error has occurred. Reported by component: Processor Core Error Source: 1 Error Type: 9 Processor ID: 0 Here are screen: 
Its only in 21.01.2018 day. I remember that system was idle in night this time.
Ok my pc:
8700K stock, MTU on, 4700mhz auto
Asus Z370 Pro Gaming
16GB DDR 3000MHZ ( XMP )
Corsair 750i
SSD Crucial 525GB
HDD TOSHIBA 500GB
Windows 10 clean install 1709 Creator Fall Update
Temps of cpu fine,temps of gpu fine. Never had any single BSOD. Memtest86 no errors. All benchmarks passing, no crashing in games
. Only saw that error in event viewer which make think that is still with cpu or what?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:05:42
(permalink)
The error is most likely being caused by your ram speed. Anything over 2666 MHz on the 8700k is considered an overclock. As you know overclocks can cause instability & errors. Run your ram at 2666 MHz if you continue to see the error.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:24:48
(permalink)
But from what i know cpu 8700k must work stable with guaranteed 3000mhz XMP memory rated.
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:26:57
(permalink)
Intel doesn't support anything over 2666 MHz.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:30:10
(permalink)
So why many peoples have 3000mhz+ on memories with that cpus ?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:32:20
(permalink)
Because not all imc's (integrated memory controllers) are created equal.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:35:23
(permalink)
Ok it stopped after 21.01 till today. No entries. But i am worried about that entries in 21.01. So i dont know what to do to replicate?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:37:17
(permalink)
I'm sure it'll pop up again sooner or later again if you keep running your ram at 3000 MHz.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:39:07
(permalink)
Ok so what to do ? Lower ram to 2666mhz in bios?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 16:39:51
(permalink)
Yes, set your ram to 2666 MHz in the bios along with the correct timings and voltage.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/01/31 17:02:25
(permalink)
Always new pc , new problems. I will sell that piece of trash
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/08 15:47:23
(permalink)
Hey update. Listen please. I updated Win 10 build to 16299.192 and next to 16299.214 build no WHEA-LOGGERS. Any ideas why on 16299.15 was getting WHEA? I was thinking about this: i had 390.65 drivers ( GeForce 390.65 WHQL (with security fixes for Meltdown and Spectre ) On old system 16299.15 ( before meltdown spectre ) hmm ?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/08 17:44:01
(permalink)
WHEA errors are only produced when a hardware error occurs. Windows had nothing to do with it.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/08 22:06:33
(permalink)
So why on build 16299.192 and next to 16299.214 no WHEA-LOGGERS warnings.? If that was hardware i think on all builds i get warnings
post edited by tmmy34 - 2018/02/08 22:08:58
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/08 23:03:01
(permalink)
Instability can happen at any time if you aren't 100% stable. Looks like you been on the stable side thus far.
|
tmmy34
SSC Member
- Total Posts : 501
- Reward points : 0
- Joined: 2017/07/12 02:06:22
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/09 00:34:28
(permalink)
I am 2 weeks on 16299.214 build and no single WHEA-LOGGER warning. So if i am unstable why in 2 weeks nothing showed in event viewer?
Pc: 9900K 5ghz ( llc level 5 idle 1.34-1.35v,load 1.313-323v) 2x16GB DDR4 GSKILL 3000mhz Asus Prime Z390-A Corsair 850RmX Rtx 2080 Ti Aorus
|
mike406
SSC Member
- Total Posts : 904
- Reward points : 0
- Joined: 2015/02/21 18:17:33
- Status: offline
- Ribbons : 13
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/02/09 20:31:01
(permalink)
Try updating to the latest chipset drivers: https://www.asus.com/us/M...ING/HelpDesk_Download/ Also, ensure that you truly are at stock clock and voltage, and that you didn't accidentally enable the "Performance" profile in your ASUS motherboard as it turns on an automatic overclock for your CPU.
post edited by mike406 - 2018/02/09 20:33:07
|
zimou13 
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2018/05/07 02:11:30
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/05/07 02:13:23
(permalink)
I havent seen any affects that might be caused from this like BSODS or freezing. All stable. Intel diagnostic tool passing. Memtest86 no errors. IHC memtest no errors. Either way should i be concerned of that error or its false positive? I had this errors in 21 january 2018 too. Then they stopped until 16 march 2018. I was using Windows 10 build 16299.15 ( october 2017 release build ). And of course pc was idling ,the same. That warnings just coming from nowhere out of the blue.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/05/07 12:42:45
(permalink)
zimou13
Either way should i be concerned of that error or its false positive?
I would be as it could mean your system is unstable.
|
zimou13
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2018/05/07 02:11:30
- Status: offline
- Ribbons : 0
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/05/08 06:46:19
(permalink)
So why on previous Win10 build was throwing errors, propably it was 16299.15 . I dont remember which build of Win10 was first after installation,because soon later W10 was updated to 16299.192 Still i have something wrong with hardware?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49170
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: WHEA-Logger Event "A corrected hardware error has occurred"
2018/05/08 08:43:14
(permalink)
zimou13
So why on previous Win10 build was throwing errors, propably it was 16299.15 . I dont remember which build of Win10 was first after installation,because soon later W10 was updated to 16299.192 Still i have something wrong with hardware?
Checkout what I said in post #13.
|