EVGA

New Build boots to no boot media detected, please insert boot menu

Author
Post
Essentials Only Full Version
trep65
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2018/01/20 18:58:51
  • Status: offline
  • Ribbons : 0
2018/01/20 19:09:56 (permalink)
Interesting new boot issue,
 
Built the new system yesterday:
Z270 FTW K
I5 7600 K
16 Gig Corsair Vengeance 3400
Drive 1 WD 256G M2 in slot 2
Drive 2 260g Samsung SSD 
Drive 3 1T IDE
Drive 4 2T IDE
 
I was able to set Drive 1 to boot drive in the bios without issue and was able to boot to that drive. Every time I boot the system displays on black screen in large text, no boot media press any key. I reset the PC and hit F2 to check bios and the 1st boot drive is drive 1. Click save and exit, save changes and restart, the system boots great. Once I do a restart from windows back to the black screen and and F2 process again. 
 
Any thoughts on this? 
#1

6 Replies Related Threads
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/20 19:13:51 (permalink)
    Disconnect the Below Drives for now. 
    Drive 2 260g Samsung SSD 
    Drive 3 1T IDE
    Drive 4 2T IDE
     
    Disable CSM in the Bios
    Set the Boot to UEFI
    Make sure your Drive "Drive 1 WD 256G M2 in slot 2" in Clean with no old Partitions that is, or is a New Drive.
    Boot Up your OS Install DVD/USB and install the OS
    When your Drive Shows up Delete Any and All Partitions and create new and install the OS
     
    Not sure what this Means "Once I do a restart from windows back to the black screen and and F2 process again. "
    post edited by bcavnaugh - 2018/01/20 19:17:12

    Associate Code: 9E88QK5L7811G3H


     
    #2
    trep65
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2018/01/20 18:58:51
    • Status: offline
    • Ribbons : 0
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/20 19:23:26 (permalink)
    Drive 1 was new, Windows 10 was installed right after the build. 
     
    The F2 process is that every time 1 reboot the 1st restart takes me to the black screen. I then need to press reset hit f2 to enter bios, check boot drive and it's set to the proper drive, save settings and it boots proper.
     
     
    #3
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/20 19:26:28 (permalink)
    Reset your Bios to the Default Save and Restart Enter the Bios and re-Flash the Bios inside the Bios using a USB Flash Drive.
    1-12-2018 BIOS 1.06 132-KS-E277 Download Unzip and you will only need this File 1E277106.bin on the Flash Drive.
    post edited by bcavnaugh - 2018/01/20 19:29:46

    Associate Code: 9E88QK5L7811G3H


     
    #4
    quadlatte
    CLASSIFIED ULTRA Member
    • Total Posts : 7191
    • Reward points : 0
    • Joined: 2006/09/14 16:52:58
    • Location: Greensboro, NC
    • Status: offline
    • Ribbons : 56
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/21 10:22:57 (permalink)
    in the boot section check that the mode is set to UEFI and first boot device is hard disk windows boot manager. also disable CSM

                                   
                                                 Heatware: http://heatware.com/eval.php?id=72498
    #5
    trep65
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2018/01/20 18:58:51
    • Status: offline
    • Ribbons : 0
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/22 06:50:19 (permalink)
    Thank you for all the help, I did get it working.
     
    the biggest issue I was having was that the M2 drive , or "windows boot manager"  would never show up as a boot option until it was the only drive in the system.
     
    Resolution as suggested:
    I unplugged all drives except the M2 drive and re-installed Windows 10. Once I did that UEFI worked great and have not had the issue again. Even after I plugged all the other drives back in. 
     
    Thanks again for all you help.
     
     
     
    #6
    bcavnaugh
    The Crunchinator
    • Total Posts : 38977
    • Reward points : 0
    • Joined: 2012/09/18 17:31:18
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: New Build boots to no boot media detected, please insert boot menu 2018/01/22 15:02:12 (permalink)
    trep65
    Thank you for all the help, I did get it working.
     
    the biggest issue I was having was that the M2 drive , or "windows boot manager"  would never show up as a boot option until it was the only drive in the system.
     
    Resolution as suggested:
    I unplugged all drives except the M2 drive and re-installed Windows 10. Once I did that UEFI worked great and have not had the issue again. Even after I plugged all the other drives back in. 
     
    Thanks again for all you help.
     

    That is what I posted above,
    Glad you are running now!

    Associate Code: 9E88QK5L7811G3H


     
    #7
    Jump to:
  • Back to Mobile