DKMan65
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2012/04/28 16:13:50
- Status: offline
- Ribbons : 0
EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch. 6850K, Asus X99-A II, (2) Geforce GTX 1080Ti SC, SLI'd, 32Gig Mem, Win 10 64bit (Build 15063.332), Precision OC ver. 6.1.6 To reproduce: 1) Create a profile using non-default values and store it in profile 2. I used 115% power target & aggressive fan profile for both GPU's and stored it in profile 2. 2) Click the gear icon in the lower right hand corner and go to to the profile tab within the popup dialog. 3) Set the "3D Profile" drop down to profile 2 (Profile created in step 1). 4) click ok and then click the "x" in the upper right hand corner of the dialog to close. 5) exit POC 6) Relaunch POC and wait for crash within ~10 seconds. DKMan65
post edited by DKMan65 - 2017/06/11 07:46:50
ASUS ROG Maximus Z690 Hero * Intel i9-12900KF * Corsair H170i Elite RGB AIO * EVGA 1300W G2 Gold * 2x16GB 5600MHz G.Skill Trident Z5 RGB * EVGA GeForce RTX 3090 FTW3 ULTRA - 24G-P5-3987-KR * System Drive: Samsung SSD 980 PRO M.2 Gen4 * 2 x Samsung 860 EVO 2TB RAID 0 * intel Optane 905P 380GB SSD * Win11 Pro 64-bit
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 09:39:04
(permalink)
Uninstall PXOC and delete the Precision XOC folder located in the Program Files (x86) folder and restart your PC..Then install PXOC again, right-clicking on the installer to Run as administrator, and see how it rolls. You might try uninstalling PXOC as described above and try older versions 6.1.4, 6.1.3, or 6.1.2 and see if any of those crash. But first you might go into the Redist folder located in the Program Files (x86)\EVGA\Precision XOC folder and manually run the dxwebsetup, vcredist_x64 and vcredist_x86 installers, right-clicking to Run as administrator..When running the vcredist_x64 and vcredist_x86 installers, choose Repair.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
DKMan65
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2012/04/28 16:13:50
- Status: offline
- Ribbons : 0
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 10:36:47
(permalink)
bob16314
Uninstall PXOC and delete the Precision XOC folder located in the Program Files (x86) folder and restart your PC..Then install PXOC again, right-clicking on the installer to Run as administrator, and see how it rolls.
You might try uninstalling PXOC as described above and try 6.1.4, 6.1.3, or 6.1.2 and see if any of those crash.
But first you might go into the Redist folder located in the Program Files (x86)\EVGA\Precision XOC folder and manually run the dxwebsetup, vcredist_x64 and vcredist_x86 installers, right-clicking to Run as administrator..When running the vcredist_x64 and vcredist_x86 installers, choose Repair.
@Bob16314, Does this issue occur for you following the outlines steps from my original post? If I disable the "3D Profile" selection the program no longer crashes, it only occurs when this option is enabled. The crash can also be avoided if I manually click one of the active "PROFILE" buttons at the bottom of the GUI immediately after the PXOC launches. DKMan65
ASUS ROG Maximus Z690 Hero * Intel i9-12900KF * Corsair H170i Elite RGB AIO * EVGA 1300W G2 Gold * 2x16GB 5600MHz G.Skill Trident Z5 RGB * EVGA GeForce RTX 3090 FTW3 ULTRA - 24G-P5-3987-KR * System Drive: Samsung SSD 980 PRO M.2 Gen4 * 2 x Samsung 860 EVO 2TB RAID 0 * intel Optane 905P 380GB SSD * Win11 Pro 64-bit
|
DKMan65
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2012/04/28 16:13:50
- Status: offline
- Ribbons : 0
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 10:51:47
(permalink)
@bob16314,
Tried "Program Files (x86)\EVGA\Precision XOC folder and manually run the dxwebsetup, vcredist_x64 and vcredist_x86 installers, right-clicking to Run as administrator." as documented in your post, but the issue still occurs. Can you confirm if you can duplicate the issue on your setup?
DKMan65
ASUS ROG Maximus Z690 Hero * Intel i9-12900KF * Corsair H170i Elite RGB AIO * EVGA 1300W G2 Gold * 2x16GB 5600MHz G.Skill Trident Z5 RGB * EVGA GeForce RTX 3090 FTW3 ULTRA - 24G-P5-3987-KR * System Drive: Samsung SSD 980 PRO M.2 Gen4 * 2 x Samsung 860 EVO 2TB RAID 0 * intel Optane 905P 380GB SSD * Win11 Pro 64-bit
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 11:08:27
(permalink)
Nope, I can't reproduce it here in Windows 10 and v6.1.6, it works fine..Uninstall/Reinstall as described above or try earlier versions and see how it rolls.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 11:09:58
(permalink)
I use Precision 6.0.6 on my main Folding rig Nibbler
|
DKMan65
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2012/04/28 16:13:50
- Status: offline
- Ribbons : 0
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/06/11 11:44:52
(permalink)
bob16314
Nope, I can't reproduce it here in Windows 10 and v6.1.6, it works fine..Uninstall/Reinstall as described above or try earlier versions and see how it rolls.
Well, uninstall-->Reboot-->Re-Install v6.1.6-->No Fix. Hmm, Guess I could try earlier versions next.
ASUS ROG Maximus Z690 Hero * Intel i9-12900KF * Corsair H170i Elite RGB AIO * EVGA 1300W G2 Gold * 2x16GB 5600MHz G.Skill Trident Z5 RGB * EVGA GeForce RTX 3090 FTW3 ULTRA - 24G-P5-3987-KR * System Drive: Samsung SSD 980 PRO M.2 Gen4 * 2 x Samsung 860 EVO 2TB RAID 0 * intel Optane 905P 380GB SSD * Win11 Pro 64-bit
|
DKMan65
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2012/04/28 16:13:50
- Status: offline
- Ribbons : 0
Re: [BUG] EVGA Precision XOC 6.1.6 crashes ~3 to 10 seconds after launch
2017/10/01 18:48:15
(permalink)
Just tried this with version 6.1.16 and behavior continues. Disabled the setting as a workaround for now.
ASUS ROG Maximus Z690 Hero * Intel i9-12900KF * Corsair H170i Elite RGB AIO * EVGA 1300W G2 Gold * 2x16GB 5600MHz G.Skill Trident Z5 RGB * EVGA GeForce RTX 3090 FTW3 ULTRA - 24G-P5-3987-KR * System Drive: Samsung SSD 980 PRO M.2 Gen4 * 2 x Samsung 860 EVO 2TB RAID 0 * intel Optane 905P 380GB SSD * Win11 Pro 64-bit
|