So last week i lost  1 of my 2, 770 card due to fan failure .I replaced the dead card with a 1070 yesterday.Now when i log onto my client it says the 770 is the number 1 gpu and is getting 550k a day [always was around 90k] while my 1070 is only getting 110k a day and is reading gpu 2[shouldn't that be closer to 800-900k?].Any ideas as to what is going on? When i first installed the 1070 on the #1 pci-e slot the computer fired back up with the 770 working as the main card and the folding client didnt even see to 1070.I had to uninstall the client[including data],reboot and reinstall client before it would find the 1070 .Shouldn't my 1070 be the gpu 1 and shouldn't it be reading  about 800k ppd for that card with the 770 reading about 90k not the other way around ? [cpu is not folding].

Run DDU in Safe Mode Reboot.... DDU not sure what this means?

Hmmm it says the  Folding Driver  373.06 is incompatible with this version of windows [win 7 64 bit] and wont install.I did everything else but it still comes up as the 770 getting 500k points a day while the 1070 gets 120k . Gonna try this again with the 770 out of the system during install and config.....Can i add the 770 to the client after the rest is configured?

ok I got the right driver[had the win 7 notebook version lol] installed and only the 1070 in the system.... should i install the 770 first or the folding client..... if the client how do you configure the client afterwards to pick up the 770?

kerryd
There is no  fix the 770's and newer cards will not play nice with each other well folding . there is a temp. fix but did not last very long . Here is the post where I went though same thing .
https://forums.evga.com/F...-my-gpus-m2566898.aspx
Both cards will fold just fine but fha client just has them back words makes the 770 look good at 500k ppd or more the 1070 not so good at a 100k .

+1

Cleaner shortcut   https://forums.evga.com/FindPost/2566898
 
 
By clicking on the post Number, (#1) in example above you get a Much shorter link with the - /FindPost/ - link
 

ok so both cards are in and folding [just being reported as the wrong card], however every day or other day my client gets weird now.when i click on web control it opens the browser however the program does not actually open.It sits and refreshes page over and over again without actually starting up .I have tried rebooting  doesn't work ,reinstalling works for a day or so.[ fah installer 7.4.4]

I never use Web Control.
I remove  --open-web-control from the short cut Folding@home