EVGA
Prev Thread
Next Thread

power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old)

Author
Post
Essentials Only Full Version
CommodoreBlitz
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 7/26/2019
  • Status: offline
  • Ribbons : 0
Friday, July 26, 2019 9:30 PM (permalink)
I was installing a Avermedia Capture card, there was a Surge, power went off. I reset the pc...it starts up...but goes to Bios and after I check everything and restart it goes back to the Bios...
 
After checking more, under Monitoring it shows 0.00 (in red) power on the 12 Volt Rail....
 
The only way I can get the pc to boot is to disable the Surge Alert...Once in windows 10, I notice that my GTX 1060 is working ok, The Avermedia Capture card tho detected by windows is not detected by the Avermedia software....
 
So first is it safe to use the PS with the Surge Alert off? and two is there really something wrong with the 12 Volt rail (I thought that was what powered the GPU but that seems to be working fine, tested it with Rage 2)...Is the 12 Volt rail the reason why the Capture card is not being detected? (the Capture card is one of those little PCIE cards not sure of the name for it, fits in that tiny slot)
 
Thanks,
 
post edited by CommodoreBlitz - Saturday, July 27, 2019 5:55 AM

 My PC (Built for Video editing/gaming)
 
I7 6700k 4 ghz
32 gb ddr 3 ram
12 TB hard drives (total)
128 gb m2 drive (video editing storage)
GTX 1060 6gb Gpu
 AvrMedia PC HD 1 Vid Capture Card
 EVGA 850 B2 80 Bronze PS
#1

4 Replies Related Threads
    bcavnaugh
    The Crunchinator
    • Total Posts : 38516
    • Reward points : 0
    • Joined: 9/19/2012
    • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
    • Status: offline
    • Ribbons : 282
    Re: power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old) Friday, July 26, 2019 9:38 PM (permalink)
    Welcome to the Forum
    Are you sure it is not just a dead CMOS Battery?

    Associate Code: 9E88QK5L7811G3H


     
    #2
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old) Friday, July 26, 2019 9:38 PM (permalink)
    Asus anti surge? Yes, disabling it is fine as it's been known to cause false positives.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #3
    CommodoreBlitz
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 7/26/2019
    • Status: offline
    • Ribbons : 0
    Re: power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old) Friday, July 26, 2019 10:06 PM (permalink)
    False Positives, hmm well what about the fact the Bios lists the 12 volt rail as 0.0 volts is that also false?

     My PC (Built for Video editing/gaming)
     
    I7 6700k 4 ghz
    32 gb ddr 3 ram
    12 TB hard drives (total)
    128 gb m2 drive (video editing storage)
    GTX 1060 6gb Gpu
     AvrMedia PC HD 1 Vid Capture Card
     EVGA 850 B2 80 Bronze PS
    #4
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old) Friday, July 26, 2019 10:27 PM (permalink)
    I would say yes since a game worked just fine.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #5
    Home » All Forums » [Other EVGA Products] » EVGA Power Supplies » power surge keeps sending me to Bios, won't boot (EVGA 850 B2 Bronze 2 years old)
    Jump to: