socialwaif
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 8/24/2015
- Status: offline
- Ribbons : 0
Wednesday, August 23, 2017 8:29 PM
(permalink)
Using an EVGA GTX 1080 SC2 GAMING. Version 6.1.15 of Precision X OC.
I normally just go with the default preset for my fans. It is labelled "Custom." I see that there are also Presets for Aggressive and Quiet fan curves. However, when I try to use either of them, they don't seem to 'take' or get saved. It goes back to the "Custom" preset. While it looks like I can adjust the values for the fan curve in the "Custom" one, I wanted to try and just use the "Aggressive" preset. I don't want to mess up or screw around with my existing ""Custom" one. It is pretty much still at the default settings. I do not have any Profiles saved, if that matters.
I could use some help figuring out what I am doing wrong. How do I get it to stick with the "Aggressive" preset after I select it?
|
bdary
Omnipotent Enthusiast
- Total Posts : 10626
- Reward points : 0
- Joined: 4/25/2008
- Location: Florida
- Status: offline
- Ribbons : 118
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 8:41 PM
(permalink)
After you make any change in the settings, make sure you click the "OK" button for it to be applied...
|
socialwaif
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 8/24/2015
- Status: offline
- Ribbons : 0
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 9:06 PM
(permalink)
bdary
After you make any change in the settings, make sure you click the "OK" button for it to be applied...
I have done that. When I click OK it reverts back to the Custom selection.
|
bob16314
CLASSIFIED ULTRA Member
- Total Posts : 7859
- Reward points : 0
- Joined: 11/8/2008
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 9:57 PM
(permalink)
For me, the Aggressive or Quiet fan curves get enabled, stick, and work as they should, it's just that the Preset reverts back to Custom, in name only, after clicking OK..Minor bug..You're doing nothing wrong.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 10:04 PM
(permalink)
bob16314
For me, the Aggressive or Quiet fan curves get enabled, stick, and work as they should, it's just that the Preset reverts back to Custom, in name only, after clicking OK..Minor bug..You're doing nothing wrong.
^ this.
|
bdary
Omnipotent Enthusiast
- Total Posts : 10626
- Reward points : 0
- Joined: 4/25/2008
- Location: Florida
- Status: offline
- Ribbons : 118
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 10:05 PM
(permalink)
bob16314
For me, the Aggressive or Quiet fan curves get enabled, stick, and work as they should, it's just that the Preset reverts back to Custom, in name only, after clicking OK..Minor bug..You're doing nothing wrong.
+1. And to add to that, make sure you also click the box that says "Enable Automatic Fan Control" and click OK. The box should look filled in...
post edited by bdary - Wednesday, August 23, 2017 10:07 PM
|
socialwaif
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 8/24/2015
- Status: offline
- Ribbons : 0
Re: EVGA Precision X OC Preset Won't Take
Wednesday, August 23, 2017 10:16 PM
(permalink)
bob16314
For me, the Aggressive or Quiet fan curves get enabled, stick, and work as they should, it's just that the Preset reverts back to Custom, in name only, after clicking OK..Minor bug..You're doing nothing wrong.
Okay, thanks. I've also been using the Automatic Fan Control setting.
|