Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
2x Intel Xeon 5690x, 24 ht cores 4300mhz - 4500mhz 1.32-1.4volt 48GB Ram 1700w for GPU's + PSU autostart chip. 650w for motherboard 3x2TB in raid 0 / stripe 3x64GB SSD in Raid 0/stripe ( system ) 6x GTX 580. 7x PCIe 16x extender cables. EK 65mm radiators, one 3x140 and one 3x120 fitted together. Ek supremacy Cpu waterblocks. Bykski Gpu Waterblocks Robban copperpipes. HPTX motherboard in a ATX Chassi š Yes š Fractal Design Define XL ATX cut in pices
post edited by Robbanswe - 2018/05/27 13:19:11
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 5427
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56

Re: Evga SR-2 Retro Build
2018/03/26 15:26:51
(permalink)
six 580's?  gonna need a second job just to pay the electric bill
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/26 21:50:52
(permalink)
It is vinter so i need a heater šš
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2625
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14

Re: Evga SR-2 Retro Build
2018/03/27 04:36:09
(permalink)
Nice! I miss my SR-2. It was a great motherboard. I used to run two GTX 295's and a GTX 590 in it.
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/27 09:08:14
(permalink)
I like it too š¤ Upload more buildpics tomorrow.
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/27 09:26:24
(permalink)
I run my Gtx 580's with low 0.9volt. And build up gpu mhz speed slowly with GPU tweek
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
t3h0th3r
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2010/05/08 18:05:23
- Status: offline
- Ribbons : 0

Re: Evga SR-2 Retro Build
2018/03/28 03:12:46
(permalink)
Oh cool another 1366 retro build (well mine's less retro and more out of the dust bin tho). Keep those pictures coming.
post edited by t3h0th3r - 2018/03/28 04:37:39
|
GhostImage
iCX Member
- Total Posts : 361
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re: Evga SR-2 Retro Build
2018/03/28 06:22:08
(permalink)
Awesome stuff bro. That is some horse power right there. Great built definitely post some more pics.
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/28 12:25:13
(permalink)
I have never build watercooling with copper pipes, ,only silicone,Ā so tomorrow buying this: Ā Probably Crome pips
post edited by Robbanswe - 2018/04/01 13:48:55
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/30 13:45:25
(permalink)
10mm copper pipes. Only started and circulated the water/glycol
post edited by Robbanswe - 2018/04/01 13:51:41
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/30 13:52:14
(permalink)
More pipes
post edited by Robbanswe - 2018/03/30 13:54:23
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/03/30 14:45:31
(permalink)
More
post edited by Robbanswe - 2018/04/01 06:13:22
Attached Image(s) 
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86

Re: Evga SR-2 Retro Build
2018/04/01 02:24:02
(permalink)
As a retro build I think this belongs in the mods rigs area so I am moving it there
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/01 06:10:24
(permalink)
Thanks ! Radiators is build OK GPU Build Ok The watercooling Ok All fans ok
post edited by Robbanswe - 2018/04/01 06:17:35
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86

Re: Evga SR-2 Retro Build
2018/04/01 06:20:04
(permalink)
Impressive water cooling work.
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/01 10:22:34
(permalink)
Thanks š¤ Still to build. Cutting hole for GPUs, fans and powercables. Rebuild the top of chassi to hide the PSU's And other. Led lamps Paint the chassi. Glue 2x radiators together so more pics later
post edited by Robbanswe - 2018/04/01 13:45:09
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/01 13:46:21
(permalink)
 More
post edited by Robbanswe - 2018/04/01 13:53:51
Attached Image(s)
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Sleinous
CLASSIFIED ULTRA Member
- Total Posts : 7663
- Reward points : 0
- Joined: 2010/06/12 12:22:01
- Location: France
- Status: offline
- Ribbons : 32

Re: Evga SR-2 Retro Build
2018/04/01 15:55:22
(permalink)
loving the work gone into this one!!!!
My Affiliate Code: GL1IAAFWJF
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/01 22:29:29
(permalink)
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/01 22:54:52
(permalink)
2xRadiators in one,,build ok. 3x120mm front fans with 5-7-12 volt switch build ok. 3x140mm ( inside )fans with 12volt and blue leds build ok. Rebuild EVGA 650W powersupply with new fancontrol from motherboard and a new 140 Fan, for better heat control,, build ok. Build a water temp display/ blue led for inlet water temp ,build ok Next to build: GPU holder with 2 80mm fans for cooling all the GPU memory and HDD bracket
post edited by Robbanswe - 2018/04/02 00:51:52
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86

Re: Evga SR-2 Retro Build
2018/04/02 02:19:34
(permalink)
Very nice. Thanks for the update
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 04:24:38
(permalink)
More:
post edited by Robbanswe - 2018/04/02 04:54:31
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 04:57:13
(permalink)
Yellow GPU+ fan holder painted black š
post edited by Robbanswe - 2018/04/02 05:23:13
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 05:40:32
(permalink)
Quit building for today. Only fixing the GPUs powercables
post edited by Robbanswe - 2018/04/02 09:03:55
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 09:06:04
(permalink)
Pics from today: It is pretty neat to have all stuff visible so am going to skip the chassi door. And go for a clean visible style with leds in GPU Blocks and hide ugly stuff like cables.
post edited by Robbanswe - 2018/04/02 10:29:59
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2625
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14

Re: Evga SR-2 Retro Build
2018/04/02 10:51:03
(permalink)
That's a pretty crazy build! I wish there could be another SR-2 motherboard design but not as long as Intel keeps their dual socket CPUs locked.
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 11:54:42
(permalink)
Thanks š¤
post edited by Robbanswe - 2018/04/02 11:59:54
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/02 12:05:36
(permalink)
Build in 2x120mm fans for cooling GPU memorys, not 80mm. 120mm looks better i think š To build : a fancy steel frame instead of the chassi door š· HDD rack,,no place in chassi š¤ going to be a problem . A pic with the chassi door ( Beta )
post edited by Robbanswe - 2018/04/02 22:41:13
Attached Image(s) 
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
Robbanswe
iCX Member
- Total Posts : 338
- Reward points : 0
- Joined: 2011/09/18 00:19:28
- Status: offline
- Ribbons : 4
Re: Evga SR-2 Retro Build
2018/04/03 21:51:00
(permalink)
GPU powercables mounted. Fix cover for it later. Part of side finish.
Attached Image(s)
2x EVGA SR-2 with X5690, 48/96GB RAM. 1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled 2x AMDThreadripper builds with 48GB ram,nvme raid. Intel 12900k,5xNVME raid, 3080,ddr5
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86

Re: Evga SR-2 Retro Build
2018/04/03 23:37:14
(permalink)
|