rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 21:49:32
(permalink)
Are you guys saying that with speedstep on your voltages drop back now? I am not observing it at all. The frequency goes down but not the voltage in CPU-Z/E-leet.
|
sedril
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2007/04/28 13:46:59
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 22:21:55
(permalink)
My voltages drop with speedstep, works perfectly for me...
Asus Maximus ROG XI Apex I9 9900k 5.1Ghz 16GB G.skill DDR4 4133 Samsung 970 Pro 512GB EVGA GTX 2080 Super FTW3 HydroCopper 8GB Watercooled CPU & GPU two separate loops with triple radiators
|
lam_das
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2009/06/07 17:34:53
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 22:46:15
(permalink)
rafale
Are you guys saying that with speedstep on your voltages drop back now? I am not observing it at all. The frequency goes down but not the voltage in CPU-Z/E-leet.
Have u selected C1E?
EVGA X58 SLI Rev 1.1 i7 920 D0 LinX/Prime Stable 4.4(21x210) HT ON 1.3125vcore, +100mV, vDIMM 1.625v, Rest Auto OCZ Gold 6GB 1680 (2:8) 9 9 9 24 1T Prolimatech Megahalems (Push/Pull) Because of S3 issues: 21x196, Auto vcore, 2:8, 8-8-8-24-1T 12GB.
|
charjol
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2010/06/21 17:01:20
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 22:53:04
(permalink)
On my E768, with BIOS 81, setting VT enabled or disabled in the CPU feature has no effect. VMware will run my 64-bit guest regardless, now with a new log message: "The virtualization capability of your processor has been enabled" showing up the first time a guest starts in a single host session. The MS detection tool always find VT enabled.
EVGA X58 FTW3 / i7-930 @ 3.80 GHz / Thermalright Venomous-X RT 12GB (6 x 2GB) Mushkin Redline 6-8-6-24 @ 1600 MHz 2 x EVGA GTX 470 SC SLI 120 GB OCZ Vertex II / 2 x 2TB WD2002FAEX (single drives) Corsair 1000HX / Lian-Li PC-B25F w/ W-LM2AB-1 side panel Windows 7 Ultimate SP1 64-bit
|
Scorpion-X
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2005/12/04 12:40:36
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 23:28:32
(permalink)
rafale
Are you guys saying that with speedstep on your voltages drop back now? I am not observing it at all. The frequency goes down but not the voltage in CPU-Z/E-leet.
No, it is still not fixed sedril
My voltages drop with speedstep, works perfectly for me...
Correct, you have the E768 motherboard, this is only an issue with the E759, E760, and E770 motherboards, there might be others, I'm not 100% sure, I have setup every EVGA X58 motherboard and these 3 do not drop voltage when speedstep is enabled like the other motherboards only multiplier, so it looks like the EVGA X58 Classified series, again I do not own the SR-2, or the E762 Classified, so I so not know if those are affected but all other EVGA X58 motherboards do not have this problem.
Processor: Intel i7-5930k @ 4500Mhz on Water Mobo: ASUS Rampage V Extreme BIOS 3504 Memory: Kingston HyperX Predator 16GB 3000MHz 4x4GB 14-15-15-37-1T Video: 2x in SLI EVGA GeForce GTX 1080 Ti FTW3 @ 2000/12000 On Air Audio: Onboard SupremeFX SSD: (OS): Samsung 960 EVO NVMe 500GB - SSD (Games): Samsung 850 Pro 1TB PSU: Corsair AX1200i Case: Coorsair Obsidian 750D Keyboard: Logitech G19s - Mouse: Logitech G502 Operating System: Windows 10 Pro x64-bit Monitor: Acer Predator XB271HU 27" 144/165Hz G-Sync IPS 1 of many many custom built systems... System Builder/Engineer/IT Professional
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/15 23:40:30
(permalink)
lam_das
rafale
Are you guys saying that with speedstep on your voltages drop back now? I am not observing it at all. The frequency goes down but not the voltage in CPU-Z/E-leet.
Have u selected C1E?
I had C3 enabled and I just tested C1E. Neither works. The voltage does not throttle down.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 00:36:05
(permalink)
Sweet, just burned BIOS onto CD and will install once done with OC stress testing. Hopefully it doesn't affect my current OC!
 “The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 00:57:19
(permalink)
amatotg
^^^^^^^^^^^
Thread troll alert!
Careful where you step.
People like you, unfortunately, has the innate stupidity .. you just punishment! You're only here to post nonsense. is the last time I answer. I apologize to EVGA, for this little mistake, and people who follow with interest thethread. Unfortunately people are not serious is almost everywhere, the world is full of them.
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 00:59:56
(permalink)
RaptorX86
People like you, unfortunately, has the innate stupidity .. you just punishment! You're only here to post nonsense.
is the last time I answer.
I apologize to EVGA, for this little mistake, and people who follow with interest thethread. Unfortunately people are not serious is almost everywhere, the world is full of them.
Google translate failure??? What were you trying to say?
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 01:10:29
(permalink)
RaptorX86
People like you, unfortunately, has the innate stupidity .. you just punishment! You're only here to post nonsense.
is the last time I answer.
I apologize to EVGA, for this little mistake, and people who follow with interest thethread. Unfortunately people are not serious is almost everywhere, the world is full of them.
Sry no speaka Engrish 
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 01:12:18
(permalink)
Just flashed BIOS 81, looking good so far. Just started to rerun the LinX stability test on the lowest voltage settings I got to without crash. 1.33 VCore @ 4.2GHz (1.318V in BIOS, no vdroop). Wish me luck on those 20 hard passes 
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 02:24:59
(permalink)
rafale@ Yes. Never mind, it was not important! direraptor22@ Excuse me, unfortunately I do not know English very well!  I'm still trying to stabilize my system. I bought the EVGA E762 recently, and I'm trying to learn to use well.
post edited by RaptorX86 - 2011/04/16 02:27:22
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
zalbard
Superclocked Member
- Total Posts : 194
- Reward points : 0
- Joined: 2009/12/14 02:30:24
- Location: Germany
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 02:40:26
(permalink)
RaptorX86Never mind, it was not important! This. Cut the crap, guys, nobody here cares about your bickering. Get to testing this BIOS, it's a much better way of spending time.
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 02:48:47
(permalink)
You're right, in fact I'm testing the stability of my system with Lynx for the moment at the level of stability seems identical to the beta bios 80.
I set the CPU to 4Ghz, Vcore to 1.35V and memory at 2000 (8 9 8 24).
I have only seen a blue screen because the QPI was too low. Now I keep it to +250 mvand I seem to be stable.
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
Crusheddream
FTW Member
- Total Posts : 1985
- Reward points : 0
- Joined: 2009/11/06 00:58:49
- Location: Central NY
- Status: offline
- Ribbons : 12
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 03:10:23
(permalink)
I had to bump my Vcore up a notch to system hardlocked on me while playing music and running IE9. Bumped Vcore a notch then ran 25 passes of linx no more lock ups.
Other than that these BIOS work great for me. Running 2x WD blacks in RAID 0 without issues.
Can't comment on the VT cause i don't use it.
|
pureenergie
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2009/02/08 20:36:34
- Status: offline
- Ribbons : 2
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 03:42:23
(permalink)
|
RaptorX86
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2011/04/07 12:30:40
- Location: Italy
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 05:17:53
(permalink)
I'm using again, the IRS driver 9.6. The driver 10.1, both using the Rampage Extreme IIand III, the E762, create blocks to the system.
I have two Raid on my system, an SSD, el else VelociRaptor
MOTHERBOARD: EVGA E762 CLASSIFIED 4 WAY SLI CPU: INTEL i7 980X @ 4Ghz RAM: G.SKILL TRIDENT 3x4GB 2000Mhz (8 9 8 24) 12GB VGA: 2 ZOTAC GTX580 SLI HARD DISK: 2 VERTEX 2E 60GB RAID 0 - 2 VELOCIRAPTOR 150GB RAID 0 SOUND CARD: SOUND BLASTER X-FI TITANIUM PCI.E CD ROM/BLU RAY: LG BH10LS30 (BLU RAY) - LG GH24NS50
|
teddy1amt
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2011/02/21 23:55:12
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 06:46:22
(permalink)
Updated to 81....decided to run LinX and Prime 95 To make sure all was set before I overclock my i7 970 and guess what......Eleet LinX and Real Temp are all locked up and cant do anything besides restart...all off of stock Speed ....NO OVERCLOCK YET
|
hairy0
New Member
- Total Posts : 51
- Reward points : 0
- Joined: 2008/02/04 15:38:10
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 08:24:13
(permalink)
Hey Guys! Just tried to update my X58 Classy3 MB bios to the latest one via the cd method and once I got to the bios update screen it said at the bottom to enter a name for the file (Flashing). The name was already entered so I hit enter and nothing happened ! It just sat there so I crtl-alt delete and tried again but still same thing. Is it a faulty file or what?
|
zoltanthegypsy
SSC Member
- Total Posts : 721
- Reward points : 0
- Joined: 2009/05/22 07:06:27
- Location: Bainbrige Island, WA, USA
- Status: offline
- Ribbons : 3
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 08:35:14
(permalink)
SATA optical drive or IDE? There was a post a while back with the same symptoms. Cured by using a SATA drive to boot the CD. Maybe... Z.
post edited by zoltanthegypsy - 2011/04/16 08:39:13
|
_NickM
FTW Member
- Total Posts : 1130
- Reward points : 0
- Joined: 2007/05/11 15:28:19
- Status: offline
- Ribbons : 3
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 08:37:55
(permalink)
hairy0
Hey Guys! Just tried to update my X58 Classy3 MB bios to the latest one via the cd method and once I got to the bios update screen it said at the bottom to enter a name for the file (Flashing). The name was already entered so I hit enter and nothing happened ! It just sat there so I crtl-alt delete and tried again but still same thing. Is it a faulty file or what?
Don't touch anything when you get to that screen and it should start flashing automatically.
|
bigcid10
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2007/02/14 18:58:41
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 09:12:10
(permalink)
I updated to 81 last night and bios says vt=enabled and in windows
the havdetectiontool app says hw vt is enabled
securable says the same
just FYI
I7-3930 c2 asus P9X79 Deluxe Corsair H100 32gb ram corsir vengance 2133 4X8GB Coolermaster silent pro1000 PS Gigabyte gtx670 GV-N670WF2-2GD viewsonic vx2835wm monitor 1 Kingston HyperX 3k 240GB ssd for OS corsair 800D XFI Titanium HD Windows 8 x64 mce
|
ozzy27
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2011/03/12 15:14:01
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 10:05:30
(permalink)
HeavyHemi
ozzy27
can't set my memory on 1600 mhz. in Bios my setting show 1600 and 2:12, but looking in E-leet. it shows 2:8.
EVGA X58 Classified3-770
Do you have 'turbo performance' (not turbo mode) enabled in the BIOS?
No: turbo performance is disabled turbo mode is enabled Intel speed step is disabled. Tried using the XMP profile in Bios and manual settings. Both doesn't show up as 1600mhz in E-leet and CPU-Z. Had the same issue with 80 beta. Strange thing is that it works with bios 78 and 79. with the same settings. Do miss something in Bios settings or a bug in the bios.  memory = Crossair vengeance • 3 x 4096MB (12GB) Triple Channel kit • DDR3 1600 / PC3-12800 • Timings : 9-9-9-24
|
HRPuffnstuff
FTW Member
- Total Posts : 1324
- Reward points : 0
- Joined: 2007/11/30 11:58:01
- Status: offline
- Ribbons : 4
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 14:45:02
(permalink)
I think I'm gonna pass on this one.
MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, EVGA Supernova 1300 G2, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans
|
rodymcamp
Superclocked Member
- Total Posts : 203
- Reward points : 0
- Joined: 2005/12/05 21:05:55
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 15:31:14
(permalink)
After a couple of days of testing, I think I will go back to the 80 beta, I am not having any vt errors but I am having some odd booting issues and a couple of times on reboot it has shut down all the way and powered off before reboot, also s3 is not working right again, like others have stated.
thanks for the hard work evga, but bios 81 is a no go for me on my 759 classified.
pc1 Evga Classified bios s22d Intel Core I7 920@3.7ghz (no voltage adjustments) Corsair Vengence 24GB @ 8-8-8-19 T2 Evga gtx480x2 SLI OCZ Vertex2 120x2 raid0 Western Digital Caviar Black WD640 x2 raid0 HITACHI Deskstar 7K1000 Corsair HX1000 Corsair H50 Thermaltake Spedo Advance Package
|
roffel
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2010/07/30 04:41:16
- Location: Holland
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 17:37:51
(permalink)
how come i can't get a single overclock working with this bios?
i usually have my cpu and all other settings set to work with an overclock to 4GHZ, and it worked with the 79 bios. but with this one even an overclock of 10mhz would cause my system to fail on boot.
i think i have to roll back to 79 cause this one is not working for me, cant even set my memory to the right timings.
anyone else experiencing these issues?
i have an EVGA X58 FTW3 mobo with an i7 920 D0, and 6GB triple channel kingston hyperX 2000mhz T1 memory.
|
teddy1amt
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2011/02/21 23:55:12
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 18:16:52
(permalink)
Yea i reflashed to my previous bios because of the lockups and now im ok
|
roffel
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2010/07/30 04:41:16
- Location: Holland
- Status: offline
- Ribbons : 0
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 18:56:28
(permalink)
ok i'll give it a go on flashing back aswell.
thanks for the confirmation.
|
teddy1amt
Superclocked Member
- Total Posts : 212
- Reward points : 0
- Joined: 2011/02/21 23:55:12
- Status: offline
- Ribbons : 1
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 23:23:55
(permalink)
roffel
ok i'll give it a go on flashing back aswell.
thanks for the confirmation.
Thats what i did and all is well again
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:EVGA X58 Motherboards - BIOS 81 Released
2011/04/16 23:44:09
(permalink)
Well, I am happy my board post much faster eliminating the double pump but the VT function needs to be fixed as well as the the C1E state not working on the classified boards. My board overclocks the same as before. I have an E760.
Jacob?
|