• Adds full support for EVGA iCX Technology.
• Update LED descriptions
• Fix S3/S4 resume error
• Various other fixes

FattysGoneWild
You know. EVGA needs to get it together and stop confusing people. I notice it says for iCX and others. So is this the new universal version or what? Because they moved 6.0.9 to ACX only. I have neither and been using 6.0.9 If this new version is in fact the universal version now. They should remove the ACX link one would assume? 

FattysGoneWild
I always use aggressive fan profile. When selecting that and hitting ok. It sets itself to custom instead of keeping aggressive. Still seems to be working though and maybe a minor bug. 

z999z3mystorys
hmm so this may fix the GPU order not showing correctly? Still backwards for me atm for my two 1080s, but I'll reboot and see if that updates/fixes it
 
I'm using a 1080 ti in the top slot, a 1080 FTW hybrid in the middle and 1080 FTW at the bottom, but it seems that my hybrid is showiing in the bottom slot, and the ACX one is in the middle on the PXOC display, it might get fixed however after a reboot, I'll update this post once I do that, (folding atm so want to finish these WU before rebooting just in case)

bcavnaugh

z999z3mystorys
hmm so this may fix the GPU order not showing correctly? Still backwards for me atm for my two 1080s, but I'll reboot and see if that updates/fixes it
 
I'm using a 1080 ti in the top slot, a 1080 FTW hybrid in the middle and 1080 FTW at the bottom, but it seems that my hybrid is showiing in the bottom slot, and the ACX one is in the middle on the PXOC display, it might get fixed however after a reboot, I'll update this post once I do that, (folding atm so want to finish these WU before rebooting just in case)

It did on my rig.
I will go check the Folding Client Now. YEP! Correct here as well.

z999z3mystorys

bcavnaugh

z999z3mystorys
hmm so this may fix the GPU order not showing correctly? Still backwards for me atm for my two 1080s, but I'll reboot and see if that updates/fixes it
 
I'm using a 1080 ti in the top slot, a 1080 FTW hybrid in the middle and 1080 FTW at the bottom, but it seems that my hybrid is showiing in the bottom slot, and the ACX one is in the middle on the PXOC display, it might get fixed however after a reboot, I'll update this post once I do that, (folding atm so want to finish these WU before rebooting just in case)

It did on my rig.
I will go check the Folding Client Now. YEP! Correct here as well.

it's possible, that if as the post here says: https://forums.evga.com/Why-is-the-main-GPU-of-my-SLI-setting-GPU2-m1993495.aspx#2394806
 
it's more or less randomly assigned, you could have gotten lucky, and it randomly assigned them in the correct order.
 
On a related note I noticed that previously, the the first and second GPU slot switched places when enabling and disabling sli, assuming enabling and disabling SLI does the " NvAPI_EnumPhysicalGPUs()" again, it could be how they kept switching every time I enabled or disabled SLI.

bcavnaugh

cNone
I have FTW 1070 and my LEDs are still uncontrollable. The LED tabs a re inactive. Sorry to say that but disappointed with the new release as it didn't solve my issue :(
Thanks for your efforts anyway.

It might be a good idea to add a post over on 1070 FTW LED PROBLEM to keep that Thread Active for the GTX 1070 FTW Users.

Attached Image(s)

klyksoft
!!!!

specialkone
Additionally, which may have been mentioned above, when I set a custom fan curve with 6.1.2 it works. When I switch to the aggressive fan curve my custom fan curve disappears and/or becomes the aggressive fan curve as well.
 
This wasn't happening in 6.0.9. Honestly guys, I've experienced nothing but intelligent, caring people with a focus on getting the problems resolved quickly when dealing with EVGA tech support and customer service. What's going on with the development and testing of this XOC software? Are you outsourcing it?

specialkone

bcavnaugh

specialkone
Additionally, which may have been mentioned above, when I set a custom fan curve with 6.1.2 it works. When I switch to the aggressive fan curve my custom fan curve disappears and/or becomes the aggressive fan curve as well.
 
This wasn't happening in 6.0.9. Honestly guys, I've experienced nothing but intelligent, caring people with a focus on getting the problems resolved quickly when dealing with EVGA tech support and customer service. What's going on with the development and testing of this XOC software? Are you outsourcing it?

Did you uninstall the 6.0.9 version and delete the Profile Folder on the Drive?
You may also want to delete any Registry Keys to clear out any old 6.0.9 info.  
 
Remember that you can Edit your own Posts to add more info.

Yes to all. I uninstalled 6.0.9 with Programs and Features, which required a reboot. Then I  deleted the Profile Folder and cleaned the registry. Then I installed 6.1.2. I could tell the uninstall was good as when 6.1.2 installed everything was at default, fans at zero (auto fan control wasn't enabled) and all osd settings were at default. Set the custom fan curve. I even tried a second time this time rebooting again after I set the custom fan curve. Custom fan curve works but when I change it to aggressive the custom curve I set is gone.