EVGA

Hot!EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21)

Page: < 1234 > Showing page 3 of 4
Author
ty_ger07
Insert Custom Title Here
  • Total Posts : 16986
  • Reward points : 0
  • Joined: 2008/04/10 23:48:15
  • Location: traveler
  • Status: offline
  • Ribbons : 174
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/04 11:32:40 (permalink)
mistermister
Sajin
Don’t know as I don’t have a card to test with. 😢



Well, its greyed out for me. 

Check first page. EVGA representative said that boost lock is not supported by the current driver and they are not sure if/when a workaround will be available.
#61
firerx
CLASSIFIED Member
  • Total Posts : 3083
  • Reward points : 0
  • Joined: 2007/01/28 12:52:50
  • Location: Phoenix, Arizona
  • Status: offline
  • Ribbons : 4
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/04 12:09:19 (permalink)
Quick Question, 
Can the version without the firmware update be used on the FE cards? 
post edited by firerx - 2020/10/04 15:16:05

Asus Rampage VI Extreme  
Intel Core i9 10900X 
Corsair Platinums 3000mhz 32gb 
 RTX 3090 FE 
TT 1200w PSU
Samsung 950 Pro M2 SSD 1tb
Samsung 850 EVO SSD 1tb
Samsumg 840 Pro SSD, Seagate 1TB drive   
LG 34" Curved Monitor 3440 X 1440       
    
  
#62
iheartpavement
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/09/22 16:28:52
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 07:08:15 (permalink)
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


where did you get 1.1.0.7?
#63
aldur80
iCX Member
  • Total Posts : 270
  • Reward points : 0
  • Joined: 2012/08/17 18:35:56
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 07:17:29 (permalink)
iheartpavement
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


where did you get 1.1.0.7?

I'd like to know this too. The website only shows 1.1.0.2 as the latest.
#64
aka_STEVE_b
EGC Admin
  • Total Posts : 15084
  • Reward points : 0
  • Joined: 2006/02/26 06:45:46
  • Location: Wouldn't you like to know....
  • Status: offline
  • Ribbons : 50
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 07:26:41 (permalink)
1.0.7 is the version previously for all the other cards before 20xx series
 
 

AMD RYZEN 9 3900X  12-core cpu~ Gigabyte X570 Aorus Elite board ~ EVGA RTX 2080 SUPER XC2 ULTRA OC~ G.SKILL Trident Z NEO 16 GB DDR4 3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 Gig SSD ~ CORSAIR H80i v2 cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 31.5" monitor 1440 @ 144Hz ~ Win 10 x64 
................ GET UP TO A 10% DISCOUNT ON PURCHASES BY CLICKING ....VVVVVVVVV.........


#65
firerx
CLASSIFIED Member
  • Total Posts : 3083
  • Reward points : 0
  • Joined: 2007/01/28 12:52:50
  • Location: Phoenix, Arizona
  • Status: offline
  • Ribbons : 4
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 08:52:31 (permalink)
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


https://www.evga.com/precisionx1/
 

Asus Rampage VI Extreme  
Intel Core i9 10900X 
Corsair Platinums 3000mhz 32gb 
 RTX 3090 FE 
TT 1200w PSU
Samsung 950 Pro M2 SSD 1tb
Samsung 850 EVO SSD 1tb
Samsumg 840 Pro SSD, Seagate 1TB drive   
LG 34" Curved Monitor 3440 X 1440       
    
  
#66
aldur80
iCX Member
  • Total Posts : 270
  • Reward points : 0
  • Joined: 2012/08/17 18:35:56
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 09:10:08 (permalink)
Doesn't seem like a good idea to use the version that isn't made for the 30 series.
#67
iheartpavement
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/09/22 16:28:52
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 09:13:41 (permalink)
and he said it was specifically 1.1.0.7 not the earlier one
#68
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 5726
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: online
  • Ribbons : 38
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 09:15:51 (permalink)
iheartpavement
and he said it was specifically 1.1.0.7 not the earlier one


There isn't a 1.1.0.7 version is what they're getting at. There is a 1.0.7 version, which is what the poster likely meant.

EVGA affiliate code: 9ZWDWFNW6A
(Don't forget to upload your invoice or no credit is given!)
 
FOLD ON
#69
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:16:37 (permalink)
1.1.0.7 is a beta version of PX1.  We aren't putting it on the site right now at our SW team's request.  I've been PM'ing members directly if they have an issue and request it.
#70
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:21:29 (permalink)
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


You listed 6 issues.  All of them were fixed by this version?
#71
iheartpavement
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/09/22 16:28:52
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:30:12 (permalink)
EVGATech_LeeM
1.1.0.7 is a beta version of PX1.  We aren't putting it on the site right now at our SW team's request.  I've been PM'ing members directly if they have an issue and request it.




i'd like a link please!
#72
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:35:33 (permalink)
iheartpavement
EVGATech_LeeM
1.1.0.7 is a beta version of PX1.  We aren't putting it on the site right now at our SW team's request.  I've been PM'ing members directly if they have an issue and request it.




i'd like a link please!


Which issue or issues are you having?


#73
iheartpavement
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/09/22 16:28:52
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:36:23 (permalink)
OC scan tool is causing my system to reboot
#74
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:37:56 (permalink)
iheartpavement
OC scan tool is causing my system to reboot


I'll go ahead and send it to you, but I don't believe that issue was a focus of this beta version.


#75
komicaaa
New Member
  • Total Posts : 28
  • Reward points : 0
  • Joined: 2013/06/05 21:13:17
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:41:01 (permalink)
Right!
Including LED & fan & VF curve & Reboot, all of them are solved
 
ps:maybe the OcScan reboot issue solved by 456.55&1.1.07(not sure)
but i thought the beta version is stable than latest version   
 
But it should be removed old version on pc in the first time to work correctly.
In the first time ,i tried overwrite install the beta version on 1.1.0.2
And the issues was not gone, it was even worse that show double all data(fan/core/memory.....) in HWN tab
 
EVGATech_LeeM
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


You listed 6 issues.  All of them were fixed by this version?




post edited by komicaaa - 2020/10/05 10:47:51
#76
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:45:14 (permalink)
komicaaa
Right!
Including LED & fan & VF curve & Reboot, all of them are solved
ps:maybe the reboot issue solved by 456.55(not sure)
 
But it should be removed old version on pc in the first time to work correctly.
In the first time ,i tried overwrite install the beta version on 1.1.0.2
And the issues was not gone, it was even worse that show double all data(fan/core/memory.....) in HWN tab
 
EVGATech_LeeM
komicaaa
After removed 1.1.0.2 and clean reinstall 1.1.0.7,My problems has all gone.


You listed 6 issues.  All of them were fixed by this version?



Could you take a screenshot of your information page in PX1 for me?  I want to send that over to our SW team.


Thanks.
#77
komicaaa
New Member
  • Total Posts : 28
  • Reward points : 0
  • Joined: 2013/06/05 21:13:17
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:50:33 (permalink)
 


Could you take a screenshot of your information page in PX1 for me?  I want to send that over to our SW team.


Thanks.




#78
Shadowedice
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2012/01/07 21:50:45
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 10:54:44 (permalink)
Would the beta of precision X1 fix an issue where Fan 1 has 0 RPM even though the % is greater than 0? Fans 2 and 3 seem to be working fine but Fan 1 is no longer spinning. This is for a 3080 XC3 Ultra.
#79
firerx
CLASSIFIED Member
  • Total Posts : 3083
  • Reward points : 0
  • Joined: 2007/01/28 12:52:50
  • Location: Phoenix, Arizona
  • Status: offline
  • Ribbons : 4
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 12:25:24 (permalink)
Bump #1 
 
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) Yesterday (permalink)

Quick Question, 
Can the version without the firmware update be used on the FE cards? 
 

Asus Rampage VI Extreme  
Intel Core i9 10900X 
Corsair Platinums 3000mhz 32gb 
 RTX 3090 FE 
TT 1200w PSU
Samsung 950 Pro M2 SSD 1tb
Samsung 850 EVO SSD 1tb
Samsumg 840 Pro SSD, Seagate 1TB drive   
LG 34" Curved Monitor 3440 X 1440       
    
  
#80
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 14:18:48 (permalink)
Shadowedice
Would the beta of precision X1 fix an issue where Fan 1 has 0 RPM even though the % is greater than 0? Fans 2 and 3 seem to be working fine but Fan 1 is no longer spinning. This is for a 3080 XC3 Ultra.


Try closing PX1, then reopening it.  If that doesn't work, go into the Setup menu, turn off Start with OS and Apply previous settings on load, and then restart the PC.  Load PX1 and see if the fan starts spinning.
#81
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 14:20:42 (permalink)
firerx
Bump #1 
 
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) Yesterday (permalink)

Quick Question, 
Can the version without the firmware update be used on the FE cards? 


Sure, but I can't promise you how much utility you'll get out of it or how much control you'll have.  But stay tuned on that front....
#82
Shadowedice
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2012/01/07 21:50:45
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 14:31:48 (permalink)
EVGATech_LeeM
Shadowedice
Would the beta of precision X1 fix an issue where Fan 1 has 0 RPM even though the % is greater than 0? Fans 2 and 3 seem to be working fine but Fan 1 is no longer spinning. This is for a 3080 XC3 Ultra.


Try closing PX1, then reopening it.  If that doesn't work, go into the Setup menu, turn off Start with OS and Apply previous settings on load, and then restart the PC.  Load PX1 and see if the fan starts spinning.


I gave that a shot (already had start with os and apply previous settings on load turned off) and my Fan 1 still does not spin.
#83
Shadowedice
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2012/01/07 21:50:45
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 16:35:28 (permalink)
 
Here are some follow up images for EVGATech_LeeM regarding my Fan 1 with 0 RPM.
My OS build is 19041.508.
Let me know if you need anything else from me.
 
post edited by Shadowedice - 2020/10/05 16:37:34

Attached Image(s)

#84
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 16:41:42 (permalink)
Thanks!  I've forwarded that to our team and will let you know if they need anything else from you.
#85
chrisk11
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2007/04/03 18:36:11
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 16:52:06 (permalink)
Could you please send me the link to the 1.1.0.7 beta also?
 
Issues I am having:
 
1) I set a custom fan curve for fan 3, (below) 40C - it runs and stops (rinse and repeat)
2) LED settings sometimes revert back to "Static" from "Temperature"
 
 

Attached Image(s)


Intel Core i9-9900K 5Ghz
Z390-AORUS-ULTRA
G.SKILL TridentZ Series 32GB
RTX 3080 FTW3 ULTRA
#86
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 2257
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 14
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 18:07:48 (permalink)
Hi chrisk11,
 
Jacob linked the file here:  https://forums.evga.com/FindPost/3107639
#87
chrisk11
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2007/04/03 18:36:11
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/05 19:54:07 (permalink)
EVGATech_LeeM
Hi chrisk11,
 
Jacob linked the file here:  https://forums.evga.com/FindPost/3107639




Downloading....
 
Thanks!

Intel Core i9-9900K 5Ghz
Z390-AORUS-ULTRA
G.SKILL TridentZ Series 32GB
RTX 3080 FTW3 ULTRA
#88
iheartpavement
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2020/09/22 16:28:52
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/06 04:56:05 (permalink)
EVGATech_LeeM
iheartpavement
OC scan tool is causing my system to reboot


I'll go ahead and send it to you, but I don't believe that issue was a focus of this beta version.




unfortunately, did not fix the OC scan tool (reboots). thank you for sending the link!
#89
NoctisXi
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 2017/03/29 19:49:23
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.2 for 30 Series ONLY (Update 9/21) 2020/10/06 09:55:08 (permalink)
I was having issues with Fan 3, the one it doesn't ramp maintain the right rpm with the other fans, upon downloading 1.1.0.7 it fixed it, however after a few minutes fan 1 and 2 will desync and drop themselves to 0 RPM 0% but Fan 3 maintains whatever % I set it at. Anyone else having this issue with 1.1.0.7.
#90
Page: < 1234 > Showing page 3 of 4
Jump to:
  • Back to Mobile