moknowsbest
Superclocked Member
- Total Posts : 194
- Reward points : 0
- Joined: 9/25/2016
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 08, 2019 1:10 AM
(permalink)
It’s here! ❤️❤️ Edit: I don’t think files uploaded via phone works? 🧐
post edited by moknowsbest - Monday, July 08, 2019 1:12 AM
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 5/26/2018
- Location: EU
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 08, 2019 1:27 AM
(permalink)
Got my hands on TF8 paste and put it to use against kryonaut, ended up having ~1C difference on CPU (spent 2 hours of testing with nh-d15, reapplied each paste 3x, TF8 was always ~1C lower). Only bad thing is that it costs a lot more to get around where I live so kryonaut is still the best one to get for me (for best temps). That said, I used the TF8 on stock AIO KINGPIN (still can't get my hands on the waterblock, its nowhere to be found) and got ~4C (closer to 3.5C) decrease on core and around 5C on memory. I think thats a pretty nice drop in temps. Got it running in push/pull at 1.2k rpm (noctua nf a12x25) and highest core temp I had was 43C at full usage and rtx on in Metro Exodus (1440p) in a 26C room.
post edited by Mcwrah - Monday, July 08, 2019 1:29 AM
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 08, 2019 1:36 AM
(permalink)
Going with TFX now but I changed over from MX-4 to TF8 over a year ago now.
When ready will report my findings going from TF8 to TFX.
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 5/26/2018
- Location: EU
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 08, 2019 1:44 AM
(permalink)
Ah that would be nice. TF8 5.8g tube was 18€(20$) and 11g tube of kryonaut is 18€(20$) as well... Didn't know TFX exists and sadly, the only way to get it is amazon and that costs over 50€(56$) with shipping, thats a bit too much lol.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 08, 2019 1:58 AM
(permalink)
Mcwrah
Ah that would be nice. TF8 5.8g tube was 18€(20$) and 11g tube of kryonaut is 18€(20$) as well... Didn't know TFX exists and sadly, the only way to get it is amazon and that costs over 50€(56$) with shipping, thats a bit too much lol.
Very True and not cheap here as well.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 9/20/2005
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 09, 2019 1:21 AM
(permalink)
Crap I'm using guild extreme goop.. 8.7kw. :/ could of ordered that stuff earlier for 10 bucks over night from amaxon and missed the eindow.. cant wait cause to.orrow I'll be pulling the block for the new 17kw thermal pads.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
dougal0614
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 11/4/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 09, 2019 1:29 PM
(permalink)
|
vladdimplr
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 10/6/2017
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 09, 2019 4:40 PM
(permalink)
Same settings as regular oc bios, switched to xoc with no changes, boosts 2190 pass after pass, I could not boost past 2160 with the oc bios. https://www.3dmark.com/3dm/37488439
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 11/13/2009
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 09, 2019 8:50 PM
(permalink)
vladdimplr
Same settings as regular oc bios, switched to xoc with no changes, boosts 2190 pass after pass, I could not boost past 2160 with the oc bios.
https://www.3dmark.com/3dm/37488439
I haven't tried the xoc bios yet, been trying to get as high a score as possible without using it. I did manage spot #29 for single card port royal and spot #20 for single card time spy extreme over the weekend though.
post edited by dwexpress - Tuesday, July 09, 2019 8:54 PM
|
gsorin
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 7/22/2015
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Sunday, July 14, 2019 6:59 PM
(permalink)
I got my K|NGP|N as well...
The pump is so silent :)
Anyways, I noticed that in load (games, benchmarks etc) the OLED temperature is higher that the one reported by GPU-Z, SuperPosition or even AC Odyssey.
OLED is showing 9-10C higher...
Which one is real?
|
FROSTYBE3R
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 8/10/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Sunday, July 14, 2019 9:13 PM
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 15, 2019 5:48 AM
(permalink)
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
gsorin
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 7/22/2015
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 15, 2019 10:05 AM
(permalink)
So is it normal that the OLED temperature to not be the same as the one reported by GPU-Z, Precision etc?
On my card the OLED is showing 9-10C higher than the software reading.
Thanks.
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 4/10/2019
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 15, 2019 10:10 AM
(permalink)
|
FROSTYBE3R
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 8/10/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 15, 2019 12:35 AM
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Monday, July 15, 2019 1:16 PM
(permalink)
gsorin
So is it normal that the OLED temperature to not be the same as the one reported by GPU-Z, Precision etc?
On my card the OLED is showing 9-10C higher than the software reading.
Thanks.
The GPU, GPU2 or GPU Die Temperature being three of them I would say the GPU. GPU2 is normally higher than GPU and the highest would be the GPU Die. But I would take a Hardware Temperature or a Software Temperature.
|
gsorin
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 7/22/2015
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 18, 2019 7:34 AM
(permalink)
I installed my KingPin with the radiator in the front of the case, wi - it's a Fractal Meshify S2  The front of the case is 3 fans height. Now the radiator is mounted at the top 2 fans level (up and mid), with the hex (tubes) on the lower side of course. I am wondering if it would be alrite to put the radiator at the lowest 2 fans level (mid and low) - I would like to make a switch, to put a regular intake fan on the top level on the vertical position. The tubes are at the bottom of the radiator, however the radiator itself won't be above the graphics card - where the pump is, but I'm not sure how safe is this for an AiO in general... could be a potential to create air bubble in the loop.
|
FROSTYBE3R
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 8/10/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 18, 2019 8:16 AM
(permalink)
gsorin
I installed my KingPin with the radiator in the front of the case, wi - it's a Fractal Meshify S2
The front of the case is 3 fans height.
Now the radiator is mounted at the top 2 fans level (up and mid), with the hex (tubes) on the lower side of course.
I am wondering if it would be alrite to put the radiator at the lowest 2 fans level (mid and low) - I would like to make a switch, to put a regular intake fan on the top level on the vertical position.
The tubes are at the bottom of the radiator, however the radiator itself won't be above the graphics card - where the pump is, but I'm not sure how safe is this for an AiO in general... could be a potential to create air bubble in the loop.
Post some benchmarks.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 18, 2019 9:55 AM
(permalink)
gsorin
I installed my KingPin with the radiator in the front of the case, wi - it's a Fractal Meshify S2
The front of the case is 3 fans height.
Now the radiator is mounted at the top 2 fans level (up and mid), with the hex (tubes) on the lower side of course.
I am wondering if it would be alrite to put the radiator at the lowest 2 fans level (mid and low) - I would like to make a switch, to put a regular intake fan on the top level on the vertical position.
The tubes are at the bottom of the radiator, however the radiator itself won't be above the graphics card - where the pump is, but I'm not sure how safe is this for an AiO in general... could be a potential to create air bubble in the loop.
If you feel there are no air bubbles in the pump and everything is running nominal, I don't see why you couldn't because any air should be stationary on top of that rad already if you've been running for weeks/months.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 4:34 AM
(permalink)
EVGA PX released !!! Version 0.4.4.0Release: 7/18/2019 - Improves RTX 2080 Ti K|NGP|N Support
- Adds support for AMD Ryzen CPU temp monitoring
- Support for Z10 RGB LCD display
- Adds ability to disable splash screen on startup
https://www.evga.com/precisionx1/
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 4:42 AM
(permalink)
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
FROSTYBE3R
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 8/10/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 7:09 AM
(permalink)
andressergio
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
No, lemme know what it does.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 2:29 PM
(permalink)
andressergio
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
I hope it allows us to change the LED Logo on the KPE Hydro Copper Water Block.
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 4:17 PM
(permalink)
FROSTYBE3R
andressergio
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
No, lemme know what it does.
didn't try it yet will talk to Vincent first, don't want to mess up things really cheers bro !
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 4:21 PM
(permalink)
bcavnaugh
andressergio
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
I hope it allows us to change the LED Logo on the KPE Hydro Copper Water Block.
I have the block didn't install it yet, what's the issue with that LED ?
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
FROSTYBE3R
Superclocked Member
- Total Posts : 242
- Reward points : 0
- Joined: 8/10/2018
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 4:33 PM
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Tuesday, July 23, 2019 8:50 PM
(permalink)
andressergio
bcavnaugh
andressergio
There's new firmware also for the RTX 2080TI KPE E200_FA41_20190617.hex did anyone try it yet ?
Cheers ! Sergio
I hope it allows us to change the LED Logo on the KPE Hydro Copper Water Block.
I have the block didn't install it yet, what's the issue with that LED ?
We cannot manage the Logo LED and it Pulsates on and off and is a little Bright as well. 
post edited by bcavnaugh - Tuesday, July 23, 2019 8:54 PM
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 25, 2019 1:48 AM
(permalink)
bcavnaugh
We cannot manage the Logo LED and it Pulsates on and off and is a little Bright as well.
Maybe new firmware solves that, but honestly i won't try it, i don't see a changelog, nothing...
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 8/20/2007
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 25, 2019 1:50 AM
(permalink)
FROSTYBE3R
There is no issue with LED, I'm pretty sure people who buy a KP/Block don't want silly little lights.
I know I sure don't.
https://i.imgur.com/6d32kQv.jpg
either way new firmware is there, i won't try it till i see some changelog
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
Thursday, July 25, 2019 2:04 AM
(permalink)
andressergio
Maybe new firmware solves that, but honestly i won't try it, i don't see a changelog, nothing...
 I Guess I Will and Report Back.
post edited by bcavnaugh - Thursday, July 25, 2019 5:03 PM
|