Omigosh724
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2020/12/06 12:07:12
- Location: United States
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:08:49
(permalink)
Also, do you have the radiator mounted vertically with the tubes at the top? (dumping heated liquid into the radiator, but unable to draw the cooled liquid out from the radiator)
|
Nereus
Captain Goodvibes
- Total Posts : 18147
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:29:48
(permalink)
FYI Jacob just said on EVGA Weekly that Hydro Coppers are delayed and no ETA sorry.
|
Cato_JA
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2020/10/05 21:39:43
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:33:06
(permalink)
I've never had a water combo or hybrid and I'm glad to have gotten in the Q day one :)
|
Cato_JA
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2020/10/05 21:39:43
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:34:32
(permalink)
Does that the cards will be shipping in Jan or are you just talking about the Q?
|
EatMyShorts99
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/12/17 23:43:22
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:49:07
(permalink)
Hello everybody!
Today my new FTW3 RTX 3090 Hybird Ultra Gaming was delivered.
Unfortunately I have a issue: The pump runs very loudly at 100% all the time.
At this point why I can not change the speed of the pump with the EVGA tool?
Why I can not create own profiles between pump-speed and fan-speed?
Best regards
|
fugly16
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 2014/02/16 22:09:53
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:54:33
(permalink)
EatMyShorts99
Hello everybody!
Today my new FTW3 RTX 3090 Hybird Ultra Gaming was delivered.
Unfortunately I have a issue: The pump runs very loudly at 100% all the time.
At this point why I can not change the speed of the pump with the EVGA tool?
Why I can not create own profiles between pump-speed and fan-speed?
Best regards
My guess is they don't want people messing around with the pump because the pump should be running at 100%
3080 FTW3 Ultra Hybrid 
|
EatMyShorts99
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/12/17 23:43:22
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 12:59:46
(permalink)
... by my opinion, the pump noise is pathetic.
It is the same noise level like my FTW3 air cooling with 75% fan-speed.
|
fugly16
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 2014/02/16 22:09:53
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 13:00:59
(permalink)
Yeah, I'm not to keen on the pump noise either. Mines a low level buzzing that is noticeable when the PC is idle.
3080 FTW3 Ultra Hybrid
|
EatMyShorts99
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/12/17 23:43:22
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 13:05:04
(permalink)
I wish there was a suitable tool like into the NZXT Kraken ... manual changing of pump-speed and fan-speed.
|
ZekeSulastin
New Member
- Total Posts : 58
- Reward points : 0
- Joined: 2018/06/06 12:58:13
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 13:07:50
(permalink)
I don't have a link to the cable handy, but from previous research on the topic you can get control of the pump speed by getting a mini-4-pin to full size cable adapter and running the pump's cable out of the shroud into a voltage controlled header on your motherboard or similar hub. You can then control the pump with the appropriate software for whatever is now powering it.
|
allenwr1505
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2020/12/01 10:35:31
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 15:07:04
(permalink)
I got my 3080 hybrid today. Unfortunately, as I was mounting the radiator on my case I had to take off the fans and put them back on the radiator due to case constraints. During the process, I crushed one of the power cables to a fan which ate a big hole into the cable. I'd like to have matching fans, does anyone know what model/how I order a new fan to replace the one I broke?
|
Versalius
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2018/11/30 18:41:55
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/18 18:07:58
(permalink)
No email today, it seems. Only one person on the spreadsheet received an email yesterday, so I might guess that was the last card of that batch. Perhaps a new batch on Monday? :D
In unrelated news, I actually managed to order a Zen3 CPU earlier from Walmart of all places. We'll see if it actually gets fulfilled with an estimated arrival date of Jan 7th. Since these are the last parts I need for my new build, this leaves plenty of time to order the GPU at least. :)
Good luck to all still waiting on the various SKUs!
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 09:44:58
(permalink)
My 3080 FTW3 Hybrid just arrived. Normal 2-day shipping but it looked like UPS was out doing special Saturday delivery with a double team of driver+runner. Looks good. Need to hit up the local microcenter for a new case.
|
XxCRUxX
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2020/09/26 12:43:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 11:20:21
(permalink)
Does anyone know what the colors on the spreadsheet represent? I looked to see if I could find what they mean, but didn't see anything. I assume green means ordered but don't know what yellow means
|
EVGA1225
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2020/12/07 12:05:44
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 12:20:34
(permalink)
ImAlwaysMadBro
Can I get my money back for being highly disappointed in this product? My gaming temps are actually higher while my idle temps still don't go as low as what my old 2080ti did with 40% fans. My scores went down after installing this and then updating to OC bios and now it refuses to let me go back to the old bios.
Try repasting it with Thermal Grizzly. Someone with the FTW3 ultra hybrid fixed the high temp issue by redoing the thermal paste. These heat sinks can be seated very poorly from the factory.
|
OLIVR
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2017/12/18 17:13:34
- Location: Dire, Safe Lane
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 14:33:25
(permalink)
What would be the best EK fittings for these? Standard 10/13 would work?
post edited by OLIVR - 2020/12/19 14:40:54
10G-P5-3898-KR 12/16/2020 9:07:47 AM
UPDATE: Email Received 06/02/21 - Purchased - Queue #146 OLIVR  
|
Shiki8
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2012/03/29 13:08:30
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 15:53:37
(permalink)
Received my FTW3 RTX 3080 yesterday and I'm impressed. I swore a long time ago I'd never use AIOs again as I've had bad experiences with pump noise even with correct radiator orientation. That said, I can hear it a tiny tiny bit, but I'm starting to get used to it and hope I won't have to step up to something with an air cooler, which is what I was originally going to do.
Card idles around 23-24C and while gaming I haven't seen it go over 53C. I simply cannot believe a GPU can run this cool... Really looking forward to getting a new case which has not yet been released, seeing as the rad is sitting on top of my FT05 atm.
|
Xilorator
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2012/08/23 11:23:46
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/19 20:52:14
(permalink)
altimax98
Xilorator
altimax98
I installed the card, DDU, updated drivers, installed precision, flashed the XOC lol
Didn’t run stock bios for more than like 10 minutes lol
I guess what I meant to ask is, is there a special XOC Bios specifically for the Hybrid Kit or will the XOC Bios for the FTW work?
Yeah it’s in the same thread. Third linked BIOS
The BIOS is for the Hybrid is saying "No display adapters were found that are compatible with this update. Press any key to exit..." Not sure what I'm doing wrong as the non hybrid XOC worked perfect.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/20 16:06:08
(permalink)
My 3080 FTW3 seems to be rock solid so far, at least in the first few hours: - NO PUMP NOISE, at least nothing you can hear above 1000 RPM fans, it's pretty quiet. This is great since my 2080 Ti Hybrid needed the pump cable mod and 7.5V to be quiet at idle. I might still do the cable mod but it's fine for now. - Ran RDR2 in 4K solid 60FPS, middle of settings slider. My 2080 Ti could do the same, but hey. About 45-50C and had no problem holding 2130 mhz or 2145mhz on the stock 400w bios. Crashed after about 30 seconds of 2190mhz. - Passed one run of Timespy, 19500 gpu score, +165 +1000 105% stock bios. It's only about 15% stronger in TS than my 2080 Ti, but should be a bigger gain in 4K and ray tracing. - 22C idle in 20C ambient. Though that's at 210mhz and the rad in free air.
post edited by kevinc313 - 2020/12/20 16:09:38
|
kring
iCX Member
- Total Posts : 274
- Reward points : 0
- Joined: 2007/01/19 09:06:42
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/20 16:30:41
(permalink)
Xilorator
The BIOS is for the Hybrid is saying
"No display adapters were found that are compatible with this update.
Press any key to exit..."
Not sure what I'm doing wrong as the non hybrid XOC worked perfect.
you probably don't want the HYBRID BIOS - it's terrible. you can't control the fans and it runs at 44% all the time... stick with the original Air Cooling BIOS.
|
coolgamer512
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2008/06/20 17:47:12
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/20 21:08:36
(permalink)
OLIVR
What would be the best EK fittings for these? Standard 10/13 would work?
They should, given that it's just standard G1/4" fittings like any other block. The thing that'll dictate what fittings to use depends on your tubing. Use the same fittings that you use elsewhere in your loop.
My computer:----- Lian-Li PC-O11 Dynamic XL- Intel 13900K- EVGA Z790 Classified- EVGA 3070 Ti FTW3- 2x32GB DDR5-6000- Samsung 970 EVO Plus 1TB + Samsung 850 EVO 1TB + Crucial MX500 2TB- EK open loop with 360mm rad (CPU only for now)- Corsair HX1000W (12 years old, but still going strong!)
|
Spliffin
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2019/07/16 10:19:14
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/20 22:03:47
(permalink)
|
Smeeg699
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2020/10/19 15:13:39
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 04:55:44
(permalink)
Spliffin
Any news on this thread?
What sort of news are you looking for? It's 5am on a Monday morning in PST. EVGA doesn't drop cards over the weekend, so we'll see what happens starting in about 4 hours.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 05:19:55
(permalink)
Spliffin
Any news on this thread?
IMHO if you weren't contacted to buy on Dec 16th or on the morning of the 17th, you've missed the second batch. Sit tight and wait for the next one, which might be after the holidays.
|
retep88
New Member
- Total Posts : 75
- Reward points : 0
- Joined: 2020/10/13 05:34:07
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 06:02:42
(permalink)
kevinc313
Spliffin
Any news on this thread?
IMHO if you weren't contacted to buy on Dec 16th or on the morning of the 17th, you've missed the second batch. Sit tight and wait for the next one, which might be after the holidays.
I am crossing my fingers that there will be another decent drop today, but I am not holding my breath. If 2020 has taught me anything, it's how to live with being disappointed.
|
enewt
Omnipotent Enthusiast
- Total Posts : 11883
- Reward points : 0
- Joined: 2020/09/21 18:01:11
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 09:01:31
(permalink)
The North American Hybrid queues are approximately here:
Card SKU Auto-Notify Date/Time
Hybrid
3090 FTW3 Ultra Hybrid 3988 12/10/2020 09:20:45
3090 XC3 Ultra Hybrid 3978 12/08/2020 10:54:44
3080 FTW3 Ultra Hybrid 3898 12/16/2020 09:03:07
3080 XC3 Ultra Hybrid 3888 12/10/2020 09:08:52
Hydro Copper (Delayed)
3090 FTW 3 Ultra HC 3989 11/13/2020 00:00:00
3090 XC3 Ultra HC 3979 11/13/2020 00:00:00
3080 FTW3 Ultra HC 3889 11/13/2020 00:00:00
3080 XC3 Ultra HC 3889 11/13/2020 00:00:00
K|NGP|N 3998 12/16/2020 09:12:53
Best of luck today!
|
rickityrickson
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2020/12/10 10:55:39
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 09:55:27
(permalink)
allenwr1505
I got my 3080 hybrid today. Unfortunately, as I was mounting the radiator on my case I had to take off the fans and put them back on the radiator due to case constraints. During the process, I crushed one of the power cables to a fan which ate a big hole into the cable. I'd like to have matching fans, does anyone know what model/how I order a new fan to replace the one I broke?
I don't think they sell the fans. You can contact EVGA and see if they can send you a replacement. If I were you though, I would just replace both with something like Noctuas.
10G-P5-3898-KR 12/16/2020 9:03:59 AM PT No 10G-P5-3888-KR 12/10/2020 9:16:38 AM PT No
|
enewt
Omnipotent Enthusiast
- Total Posts : 11883
- Reward points : 0
- Joined: 2020/09/21 18:01:11
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 09:58:51
(permalink)
rickityrickson
allenwr1505
I got my 3080 hybrid today. Unfortunately, as I was mounting the radiator on my case I had to take off the fans and put them back on the radiator due to case constraints. During the process, I crushed one of the power cables to a fan which ate a big hole into the cable. I'd like to have matching fans, does anyone know what model/how I order a new fan to replace the one I broke?
I don't think they sell the fans. You can contact EVGA and see if they can send you a replacement. If I were you though, I would just replace both with something like Noctuas.
I think it is worth a call to EVGA customer support (1.888.881.EVGA (3842)). I would think they would be able to help you out...best of luck!
|
homestyle
Superclocked Member
- Total Posts : 228
- Reward points : 0
- Joined: 2020/11/20 20:49:55
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 11:25:37
(permalink)
what aio cooler is evga using? Corsair model, asetek, coolit, etc?
|
bradsour
SSC Member
- Total Posts : 644
- Reward points : 0
- Joined: 2019/02/26 15:56:58
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/12/21 11:27:13
(permalink)
homestyle
what aio cooler is evga using? Corsair model, asetek, coolit, etc?
It's my understanding that it's an asetek.
EVGA Queue Tracker MegathreadDon't forget to google EVGA Queue Tracker  After receiving your EVGA product use my rewards code above to gift me a couple EVGA bucks.
|