KickAssCop
Sorry for asking this here but I can seem to find the answer. Which email do I send an email to replace my 3090 with correct PCB version? Thanks to anyone that responds. Reason I post here is that even the bios flash didn’t help with power balance issue.

3090OC@evga.com is the email if your power usage is low.

Hey, are there any performance benefits to addih the hybrid bios to my xc3 Ultra? Still running the old Xc3 Ultra bios and don't know if i'm leaving any performance on the table..

MilanB98
Hey, are there any performance benefits to addih the hybrid bios to my xc3 Ultra? Still running the old Xc3 Ultra bios and don't know if i'm leaving any performance on the table..

You need it only if installing Hybrid kit.

coresare
Anyone know when the Xoc bios will support the kl version for the higher power draw? I have the 3080 ftw3 ultra.

Those are already posted in the 3080 LHR section.

EVGATech_LeeM

coresare
Anyone know when the Xoc bios will support the kl version for the higher power draw? I have the 3080 ftw3 ultra.

Those are already posted in the 3080 LHR section.

So basically the 3080 ftw Hybrid cards have the xoc bios from factory that I'm trying to achieve by flashing my regular 3080 FTW3 ultra with the XOC bios for higher power draw? I have ordered the hybrid kit already.

EVGATech_LeeM

• EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) [3090OC/ReBAR] (Normal is C005/OC is C002)

When I download this file, I noticed the names of the exe's start with 3982. Just curious if that was a type-o?
Thanks
 

EVGATech_LeeM

Jack-Rabbit

EVGATech_LeeM

• EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) [3090OC/ReBAR] (Normal is C005/OC is C002)

When I download this file, I noticed the names of the exe's start with 3982. Just curious if that was a type-o?
Thanks
 

No typo.  It's the correct BIOS if you have a Rev 1.0 PCB.

Thanks LeeM, took card out and found that mine is a rev 0.1 with black lips. I guess we'll see what they say...

I flashed my 3080 FTW3 Ultra to the XOC Hybrid after installing the hybrid kit. I have motherboard bios fast boot disabled. Even tried running DDU. I just get the firmware "up to date" message and nothing happens as others have reported. I have an AMD Ryzen 9 5900x and a Asus Crosshair VIII Hero if that's helpful.
 
I was able to try flashing the 4897 XOC bios and saw the actual progress bar and successful flash, but nothing happens with the XOC Hybrid file.
 
What's the difference between the 4897 XOC bios and the 4898 XOC Hybrid bios?
 
here is the "i" info after trying to flash the XOC Hybrid file in the attached file. After flashing the bios with 4897 XOC bios everything is the same except version is 94.02.71.40.A9

As i know own a 3080 xc3 and put hybrid kit on it, is the hybrid bios flash worth it? Can i still up the powerlimit to 108%? (Like i can now with the old bios)

coresare
EVGATech_LeeM I can't sent pms yet but do you know roughly how quickly a new bios might come out to address users not able to flash their cards with with Hybrid XOC bios?

Hopefully, Monday.  It's been reproduced and confirmed.

EVGATech_LeeM

eLF1n
EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) I have such a video card, but it has an ekvb water block. what BIOS to set for the 500V mode? What BIOS needs to be installed, what would it be in os 500v mode?

I would use the 3080 FTW3 Ultra XOC BIOS, which you linked.  It ultimately doesn't matter if you use the Normal or OC switch when you flash the card, but using the OC switch is probably easier to keep track of where it's installed.

3080 FTW3 Ultra XOC BIOS ? mb 3090? 

Will there be a new Bios for the King Pin Hybrid? Without activating the Dipswitches the Card is not able to pull the full 480 Watts with Oc Bios or 520 Watts in LN2 Bios, In most games I see around 400 - 440 Watts

EVGATech_LeeM

eLF1n

EVGATech_LeeM

eLF1n
EVGA GeForce RTX 3090 FTW3 Ultra (24G-P5-3987-KR) I have such a video card, but it has an ekvb water block. what BIOS to set for the 500V mode? What BIOS needs to be installed, what would it be in os 500v mode?

I would use the 3080 FTW3 Ultra XOC BIOS, which you linked.  It ultimately doesn't matter if you use the Normal or OC switch when you flash the card, but using the OC switch is probably easier to keep track of where it's installed.

3080 FTW3 Ultra XOC BIOS ? mb 3090? 

Sorry, just a typo.  I meant 3090.

after updating the BIOS, in a game like warzone, the fps dropped 50-100. tell me, mb I did not install the correct BIOS? I have a 24G-P5-3987-KR 3090 card with ekwb waterblock, and on-board OS mode. for some reason, instead of x16 3.0, it works in x4 3.0 mode ... did anyone have such a problem?

Which BIOS works for the following Part Number: 10G-P5-3897-KL?

I was hoping for help from anybody, with two BIOS questions regarding my EVGA 3080 TI FTW3 Ultra.

1st) I’m currently on Graphics VBIOS: 94.02.71.00.B0 (was installed when I got the card and launched PX1 the first time) currently it says there is a VBIOS update. Card is switched to OC Mode. My question is, can anybody expand on the fixes, improvements, or what the new bios update is supposed to address?

2nd) I’ve read that in OC Mode this card should be able to reach 450w. Understandably some games don’t tax the card that hard and I read that if you want to confirm the card to hit that, to try something like Furmark which I did. Is it within spec to only hit 441.4w , and only see my Pwr Consumption to be 110.3% even though I slid my Power Target all the way to 113%?

I can’t upload a screenshot with the upload files to server button option, it just keeps spinning and spinning after I select a photo unfortunately.

Thanks @EVGATech_LeeM for all your hard work answering everyone’s questions and helping us out!

And Thanks in advance to anyone who can advise.!