EVGA

EVGA GTX 1080 Ti FTW3 HYBRID *SOON*

Page: << < ..111213 > Showing page 11 of 13
Author
Post
Essentials Only Full Version
vfxcorp
New Member
  • Total Posts : 19
  • Reward points : 0
  • Joined: 2009/03/08 10:19:23
  • Location: Kansas City, Missouri
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/07/27 05:28:08 (permalink)
Ordered FTW3 Hybrid a few minutes ago! At the moment it looks to only be available from the EVGA website; better act quick if you want one.
#301
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/07/27 12:38:03 (permalink)
Can anyone tell me how long the braided hoses are on the FTW3 Hybrid?
 
I checked the spec sheet but it didn't have any info on hose length.

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#302
kevster
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/03/28 18:11:55
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/01 23:03:16 (permalink)
petmic10
Can anyone tell me how long the braided hoses are on the FTW3 Hybrid?
 
I checked the spec sheet but it didn't have any info on hose length.




The tubes are roughly 12 inches long. You will have to subtract from that depending on how much bending the tubing will need to do to at each end of the tubes.
#303
rjohnson11
EVGA Forum Moderator
  • Total Posts : 84450
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Netherlands
  • Status: offline
  • Ribbons : 85
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/01 23:08:54 (permalink)
petmic10
Can anyone tell me how long the braided hoses are on the FTW3 Hybrid?
 
I checked the spec sheet but it didn't have any info on hose length.


The positioning of the radiator if it is mounted as the rear exhaust fan position should have enough length to go to the primary PCI-E slot position. 

AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

#304
kevster
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/03/28 18:11:55
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/01 23:09:24 (permalink)
rightwingpsycho
kevster
If anyone has the card now, can they confirm if the radiator fan can be adjusted by the card? Or would you have to buy a different fan still and plug it into a controller?


Yes it can be controlled via EVGA Flow Control




Well, I can not control the radiator fan with Flow Control. I downloaded it, whenever I launch it, it says no devices found. I believe you think you can because you have an EVGA CPU cooler. Are you absolutely positive you can control the GPU radiator fan? You may even be able to link a fan to the GPU temp, but the fan that is controlled I bet is one of the CPU radiator fans, and not the GPU radiator fan.
#305
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 04:46:40 (permalink)
kevster
The tubes are roughly 12 inches long. You will have to subtract from that depending on how much bending the tubing will need to do to at each end of the tubes.



Thanks.

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#306
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 05:08:33 (permalink)
rjohnson11
The positioning of the radiator if it is mounted as the rear exhaust fan position should have enough length to go to the primary PCI-E slot position. 



Thank you.
 
I'm replacing a MSI Seahawk 1080 X that is mounted at the bottom front as an intake. And the tube length on the Seahawk is a hair under 15" long. It looks like the hybrid wont reach there.

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#307
Notwist
Superclocked Member
  • Total Posts : 130
  • Reward points : 0
  • Joined: 2017/04/07 19:06:42
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 06:34:39 (permalink)
petmic10
rjohnson11
The positioning of the radiator if it is mounted as the rear exhaust fan position should have enough length to go to the primary PCI-E slot position. 


Thank you.
 
I'm replacing a MSI Seahawk 1080 X that is mounted at the bottom front as an intake. And the tube length on the Seahawk is a hair under 15" long. It looks like the hybrid wont reach there.


You *really* don't want to mount the radiator lower then the pump in the first place. And mounting as intake dumps all that hot air inside the case so you don't get as much benefit from the CLC. Why not rear exhaust?
#308
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 06:44:55 (permalink)
Notwist
petmic10
rjohnson11
The positioning of the radiator if it is mounted as the rear exhaust fan position should have enough length to go to the primary PCI-E slot position. 


Thank you.
 
I'm replacing a MSI Seahawk 1080 X that is mounted at the bottom front as an intake. And the tube length on the Seahawk is a hair under 15" long. It looks like the hybrid wont reach there.


You *really* don't want to mount the radiator lower then the pump in the first place. And mounting as intake dumps all that hot air inside the case so you don't get as much benefit from the CLC. Why not rear exhaust?



It works really well there. I have it set up in a push/pull configuration and temps stay in the low to mid 50's while gaming. I have a corsair H100i V2 mounted at the top also in push/pull that's cooling my 6700k cpu overclocked to 4.5Ghz. Temps on the cpu get only into the high 50's to low 60's. Overall my temps are pretty good in a case that is notorious for bad airflow.
 
I don't have any choice with the Hybrid. It has to be mounted as a top or rear exhaust in my case(Evolv ATX). I just wish the tubing was longer so i had more options.
 
 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#309
MaKoMaN
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/07/25 12:17:38
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 07:22:23 (permalink)
It seems I can only adjust the speed of the VRM fan via the XOC application (If one of the other sliders controls the Rad fan or pump I can't hear a difference).
Anyone know how I can check the RPMs of the radiator fan & the pump? And how to adjust their curves separately (if at all possible)
#310
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 08:46:57 (permalink)
UPS just dropped mine off at work.
 
Can't wait to get home.
 
 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#311
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 10:15:42 (permalink)
Notwist

You *really* don't want to mount the radiator lower then the pump in the first place. And mounting as intake dumps all that hot air inside the case so you don't get as much benefit from the CLC. Why not rear exhaust?



True on the position of the rad.  

On the mounting as intake, I think that could be different based on case by case.  Some cases have enough intakes to mix that warm to hot air while other smaller cases don't and turns the PC into a sauna.  Again, that all depends but in most cases airflow is set for front/bottom as intake and top/rear as exhausts.  In some cases like mine, since I have a filtered top and a massive open unfiltered rear, I have my top along with my bottoms and front as intakes, giving all my rads fresh cool ambient air and allowing it all to exhaust out the unfiltered back via positive pressure.  Less dust build up internally as well and of course, great temps all around.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#312
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 14:18:09 (permalink)
This card is a beast. From the pictures I've seen I thought the card was a battleship grey. It turns out it is a Satin Black. Matches my Evolv ATX case perfectly.
 






 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#313
SuchyWladziu
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2015/02/01 03:02:51
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 14:33:33 (permalink)
Shame than fan side it`s not rgb ;/ 
 
#314
SDPadre7
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2013/07/23 06:41:43
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 16:27:33 (permalink)
Thanks for the pictures. I'm on vacation and have mine waiting at home. 👍
#315
zulfe
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2017/08/01 18:28:31
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 19:20:38 (permalink)
petmic10
This card is a beast. From the pictures I've seen I thought the card was a battleship grey. It turns out it is a Satin Black. Matches my Evolv ATX case perfectly.
 






 



Thanks for the images! I've been looking for a factory watercooled card just noticed this thing has recently hit the market. If you've got it in your case could you take some pictures of the RGB elements on the card? The product page seemed pretty lacking in terms of showing off the RGB.

[CASE] Phanteks Evolv Glass :: [CPU] Intel i7-7700K @ 4.5GHz :: [GPU] EVGA GTX 1080Ti FTW3 HYBRID :: [MB] ASUS Maximus IX Hero :: [MEM] G.Skill RGB 16GB 3200MHz :: [COOL] NZXT Kraken X62 :: [STOR] Samsung 960 EVO 500GB
#316
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 20:22:12 (permalink)
zulfe
petmic10
This card is a beast. From the pictures I've seen I thought the card was a battleship grey. It turns out it is a Satin Black. Matches my Evolv ATX case perfectly.


Thanks for the images! I've been looking for a factory watercooled card just noticed this thing has recently hit the market. If you've got it in your case could you take some pictures of the RGB elements on the card? The product page seemed pretty lacking in terms of showing off the RGB.






 
This is all I got right now.
 
I'm trying to figure out why the vrm fan is not spinning. I've tried the master and slave bios but it won't spin at idle. Not sure if it's by design? I haven't downloaded EVGA Precision XOC yet so maybe that is my problem?

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#317
kevster
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/03/28 18:11:55
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 20:56:17 (permalink)
petmic10
 
I'm trying to figure out why the vrm fan is not spinning. I've tried the master and slave bios but it won't spin at idle. Not sure if it's by design? I haven't downloaded EVGA Precision XOC yet so maybe that is my problem?




Yes, download Precision XOC and set your own fan curve or you can set it to be a static %. That is also how you will be able to change your lights on it.
#318
SDPadre7
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2013/07/23 06:41:43
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 21:49:57 (permalink)
I have the same case. 👍 Will upload some pictures this weekend once I get the card installed.

petmic10
zulfe
petmic10
This card is a beast. From the pictures I've seen I thought the card was a battleship grey. It turns out it is a Satin Black. Matches my Evolv ATX case perfectly.


Thanks for the images! I've been looking for a factory watercooled card just noticed this thing has recently hit the market. If you've got it in your case could you take some pictures of the RGB elements on the card? The product page seemed pretty lacking in terms of showing off the RGB.






 
This is all I got right now.
 
I'm trying to figure out why the vrm fan is not spinning. I've tried the master and slave bios but it won't spin at idle. Not sure if it's by design? I haven't downloaded EVGA Precision XOC yet so maybe that is my problem?
#319
kevster
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2014/03/28 18:11:55
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/02 21:58:34 (permalink)
zulfe
 

Thanks for the images! I've been looking for a factory watercooled card just noticed this thing has recently hit the market. If you've got it in your case could you take some pictures of the RGB elements on the card? The product page seemed pretty lacking in terms of showing off the RGB.




Here is one for you. The colors are quite vivid. You can change them to just about anything and pretty much all individually controlled.The G P M lights can be static colors, link to the main side light, or change based on temperature. The main EVGA side light can be static on/off, go through a rainbow of colors or breathe. The backplate EVGA light can be static on/off or link to the main EVGA side light but will not breathe with the main side light. The only light you don't have any control of is the FTW3 light.
 
 
#320
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 03:50:49 (permalink)
Can someone share his opinion who has this modell?
What about pump noise, temperatures etc..?

Thank you
post edited by AdamInk - 2017/08/03 04:13:43


 

#321
sleevo
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 2010/01/19 05:54:51
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 04:11:13 (permalink)
Very nice !!

CASE - Corsair Graphite Series 760T White
CPU - Intel
Devil's Canyon Core i7-4790K @ 4.7GHz 1.265v
CPU Cooler - Noctua NH-U12S push & pull
MB - Gigabyte GA-Z97X-UD5H- Black Edition
MEMORY - Corsair Dominator Platinum 2400 16GB
GRAPHICS - EVGA GTX 1080Ti FE
SSD - Samsung 850 Pro Series 512GB SSD
HD - WD Black Series 2TB
SOUND -Sound Blaster Z
PSU - EVGA SuperNova 1000 G2 PSU
MONITOR - Dell S2716DG 2560x1440 @144Hz G-Sync
Windows 10 
#322
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 04:59:19 (permalink)
kevster
petmic10
 
I'm trying to figure out why the vrm fan is not spinning. I've tried the master and slave bios but it won't spin at idle. Not sure if it's by design? I haven't downloaded EVGA Precision XOC yet so maybe that is my problem?




Yes, download Precision XOC and set your own fan curve or you can set it to be a static %. That is also how you will be able to change your lights on it.




Thanks.
 
I'll have to download it tonight after work. I ran out of time last night rearranging my case, installing a clean driver and trying to figure out why my VRM fan was not spinning. I was able to put the radiator as a front intake like my previous MSI Seahawk. I didn't think it would be possible with the shorter hoses but it reached. I disconnected the EVGA radiator fan and I'm using a Cougar fan connected directly to my motherboard. Idle temps were 26C but I'm still working on my fan curve. I may just connect the Cougar fan directly to the Hybrid and control it with Precision. Sadly, I have no load temps yet. 
 
 
 
 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#323
petmic10
iCX Member
  • Total Posts : 333
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 2
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 15:46:39 (permalink)
Just to update, I downloaded Precision XOC and I was able to control the VRM fan and lights.
 
I updated to the current drivers and went into NVidia Control Panel under Manage 3D Settings and made sure Power Management Mode was set to Prefer Maximum Performance for each game I'm currently playing. I fired up The Witcher 3 and was immediately greeted with 2000MHz gpu clock speed in default mode. This card is amazing It never got hotter than 46C in the hour I spent playing.
 
EVGA knocked it out of the park with this one!
 

 
 

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#324
joelfuzat
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2015/06/06 12:08:11
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:06:57 (permalink)
Installed my brand new 1080ti FTW3 Hybrid yesterday. 
 
DP cable will not send signal to my my Acer X34 (3440x1440) monitor. Bought a different DP cable today - no luck either. Unfortunately, both DP cables are 4' in length. It was suggested to me I need a shorter cable - but, not possible where I live.
 
However, using and HDMI cable DOES work - but can only push 50 Hertz refresh rate - so, clearly not acceptable for my monitor. 
 
Started the RMA process....However, better solution is that someone out there has an idea for a possible fix? Seems difficult to believe this new GPU can push HDMI but not DP. 
 
Did everything from resetting BIOS to unplugging cords, power off, etc. etc. etc. 

View 71 Tempered Glass RGB Plus Edition | various Samsung Pro SSD's | 9900k delidded | BeQuiet Dark Power Pro 11 Platinum 1000w | Case fans -> silent wings 3's | FTW 3090 Ultra Hybrid w/Noctua replacement fans | Corsair h150i w/BeQuiet replacement fans
#325
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:22:28 (permalink)
joelfuzat
Installed my brand new 1080ti FTW3 Hybrid yesterday. 
 
DP cable will not send signal to my my Acer X34 (3440x1440) monitor. Bought a different DP cable today - no luck either. Unfortunately, both DP cables are 4' in length. It was suggested to me I need a shorter cable - but, not possible where I live.
 
However, using and HDMI cable DOES work - but can only push 50 Hertz refresh rate - so, clearly not acceptable for my monitor. 
 
Started the RMA process....However, better solution is that someone out there has an idea for a possible fix? Seems difficult to believe this new GPU can push HDMI but not DP. 
 
Did everything from resetting BIOS to unplugging cords, power off, etc. etc. etc. 


Try to use a verified dp cable, try that out which came with your monitor.


 

#326
joelfuzat
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2015/06/06 12:08:11
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:24:33 (permalink)
Appreciate the swift response! 
 
The brand is attached below. 
 

 
The one which came with my monitor was impossibly short. Would have had to put computer on desk next to monitor. 
Also, my previous card was an EVGA 1080ti FTW3 - basically, exact same card. 
post edited by joelfuzat - 2017/08/03 20:28:52

Attached Image(s)


View 71 Tempered Glass RGB Plus Edition | various Samsung Pro SSD's | 9900k delidded | BeQuiet Dark Power Pro 11 Platinum 1000w | Case fans -> silent wings 3's | FTW 3090 Ultra Hybrid w/Noctua replacement fans | Corsair h150i w/BeQuiet replacement fans
#327
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:28:54 (permalink)
joelfuzat
Appreciate the swift response! 
 
This is the brand ->
 
The one which came with my monitor was impossible short. Would have had to put computer on desk next to monitor. 


If it short or not try it. We just want to know that the port on your gpu is bad or just the cable wrong.
Its just for the test to see if it working or not, i think you dont want to start an rma is is not necessary :)


 

#328
joelfuzat
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2015/06/06 12:08:11
  • Status: offline
  • Ribbons : 0
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:30:15 (permalink)
I no longer have that cable. See my last post. Same card, despite different cooling strategy, worked with the startech cable - a brand which has worked with every EVGA GPU I've ever owned. 

View 71 Tempered Glass RGB Plus Edition | various Samsung Pro SSD's | 9900k delidded | BeQuiet Dark Power Pro 11 Platinum 1000w | Case fans -> silent wings 3's | FTW 3090 Ultra Hybrid w/Noctua replacement fans | Corsair h150i w/BeQuiet replacement fans
#329
AdamInk
Superclocked Member
  • Total Posts : 240
  • Reward points : 0
  • Joined: 2016/10/02 04:23:53
  • Location: Hungary
  • Status: offline
  • Ribbons : 1
Re: 1080Ti FTW3 HYBRID coming in June 2017/08/03 20:33:36 (permalink)
joelfuzat
I no longer have that cable. See my last post. Same card, despite different cooling strategy, worked with the startech cable - a brand which has worked with every EVGA GPU I've ever owned. 


No signal at all? No signal in windows or just during boot up?


 

#330
Page: << < ..111213 > Showing page 11 of 13
Jump to:
  • Back to Mobile