bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
New 4P Folding Rig, ready to join The Big Boys. Motherboard: SUPERMICRO H8QGL-IF - Motherboard - SWTX - Socket G34 - 4 CPUs supported - AMD SR5690/SP5100 - 2 x Gigabit LAN - onboard graphics Web Site for H8QGL-iF CPU's: 4 Each Amd Opteron (sixteen-core) Model 6272 Memory: 16 Each for a total of 32GB 3D Memory 2GB Module DDR3 PC3-10600 CL=9 Registered ECC w/Parity DDR3-1333 Single Rank, x8 Low Voltage 1.35V 256Meg x 72 for SuperMicro H8QGL-iF Motherboard Mfr P/N n/a Part No. 3D-13D374R12978-2G 4 Each Noctua Fan NH-U9DO A3 for AMD Opteron G34 C32 CPU Cooler SSO Bearing Retail I will set this rig on top of my 2P case as I have not found a case for it. Same setup a my 2P OS Ubuntu 12.04.2 LTS and this time I will start off with Version 6 of the FAH Client. Still looking for a PSU this MB needs 3 each 8 Pin connectors + the standard 24 Pin (Looking at my old 800D seeing if I can remove the to front drive bay system) Looks like the 800D will work!! The Size of the beast is (LxW) 16.48" x 13" (418 x 330 mm) Also if I can find a 3rd 8 Pin PSU cable I think I can use a AX 1200 *Non i version Note: "Big Boys" is NOT the same as "The Good Old Boys" I may have to go with this for the PSU and use a AX 1200 8 to Dual 8 Pin EPS 12V Motherboard Power Supply Y-Splitter Adapter Sleeved Power Cable
post edited by bcavnaugh - 2013/08/24 17:42:09
|
asus939
FTW Member
- Total Posts : 1418
- Reward points : 0
- Joined: 2010/12/11 13:23:13
- Location: Affilate Code VPI1UTF1VP PLEASE USE
- Status: offline
- Ribbons : 2
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 17:03:30
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 17:11:53
(permalink)
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 2009/11/27 12:21:01
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 17:33:59
(permalink)
bcavnaugh Still looking for a PSU this MB needs 3 each 8 Pin connectors + the standard 24 Pin I'm not sure how many PSUs actually have more than two EPS 12V connectors; most probably have just one. I believe pretty much everyone with 4Ps uses PCIe-to-EPS adapters; it's what I was told to do by others who had similar setups to mine, and I've had no problems with two of the four 8-pin connectors on my board being PCIe adapted in the four months or so I've had it running.
Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
Viper97
CLASSIFIED ULTRA Member
- Total Posts : 5208
- Reward points : 0
- Joined: 2007/09/07 13:06:18
- Location: Chillin'
- Status: offline
- Ribbons : 11
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 17:46:13
(permalink)
Yeah... kick some butt! That's what I'm talking about! So... for Zagen... yeah... you'd think that about the power supply but take a look at the EVGA 1500 and others. It's more common now than you think.
|
Zagen30
SSC Member
- Total Posts : 528
- Reward points : 0
- Joined: 2009/11/27 12:21:01
- Location: Laguna Niguel, CA
- Status: offline
- Ribbons : 3
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 17:59:05
(permalink)
I see both versions of the NEX1500 listed as only having two EPS connectors...
Core i7 3770K @4.3 GHz, 8 GB DDR3 @2133 MHz, 2xGTX 970 SSC @1379 MHz, Windows 7 Pro 64-bit Affiliate code: K4BJ4FHUX5
|
asus939
FTW Member
- Total Posts : 1418
- Reward points : 0
- Joined: 2010/12/11 13:23:13
- Location: Affilate Code VPI1UTF1VP PLEASE USE
- Status: offline
- Ribbons : 2
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 18:07:15
(permalink)
oh you will catch me i know this plus what you have done in less then 6 months took me a year to get point wise but its ok i'll wave as you go by me i'm just a budget folder and will always be just that but i will make you work hard to pass me so get to work
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 18:33:41
(permalink)
Zagen30
I see both versions of the NEX1500 listed as only having two EPS connectors...
This may be true but I am not running GPU Cards so I can add a 3rd or even a 4th if needed. All I need is one extra cable and I thought I had one but have yet found it.
|
notfordman
Omnipotent Enthusiast
- Total Posts : 10345
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: online
- Ribbons : 28
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/16 22:20:23
(permalink)
|
Grandpa_01
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2012/04/28 20:59:00
- Status: offline
- Ribbons : 0
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 01:19:02
(permalink)
You can use the 3rd connector if you wish but it is not needed even when OCing and Zagen30 you do not need it either I am running 3 - 4P 4650 rigs with 2 - 8pin connectors. The only time you would need it is if you are running some GPU's in the board and I have had a single GTX580 in the 4650's before and it did not need the 3rd 8 pin
|
creedin
Superclocked Member
- Total Posts : 151
- Reward points : 0
- Joined: 2009/05/03 20:54:18
- Status: offline
- Ribbons : 2
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 04:07:29
(permalink)
the nex1500 has 4 8 pin connectors. (if i recall) 2 cables with two cu 8 pins on each.
|
texinga
CLASSIFIED ULTRA Member
- Total Posts : 5066
- Reward points : 0
- Joined: 2010/07/03 14:30:32
- Status: offline
- Ribbons : 22
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 06:06:28
(permalink)
Bc, you have been attacked by the "Folding MP Virus" and at this time the only cure is to Fold as much as possible until new gear is required to relieve the symptoms! A 4P G34 board is an absolute "thing of beauty"...good for you and I know you will love it. I've yet to see a PC power supply with (3) EPS power connections. I made my own adapter (whether needed or not) from (2) 6-pin PCIe cables. If you decide to have that 3rd EPS cable, and use an adapter, just make sure it isn't one of those 3rd party adapters that loads up (gangs) multiple wires onto single pin(s) in the adapter. There have been burned cables from people that used them and they are not electronically the proper way to split a cable. Using (2) 6-pin PCIe cables as your source to the 8-pin EPS, every pin on the EPS has it's own individual wire and nothing is ganged (such as you will see in some poorly designed adapters). Have fun with that new beast!!
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 06:09:17
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
|
yodap
CLASSIFIED Member
- Total Posts : 4642
- Reward points : 0
- Joined: 2011/05/15 06:13:40
- Location: NY, Upstate
- Status: offline
- Ribbons : 8
|
texinga
CLASSIFIED ULTRA Member
- Total Posts : 5066
- Reward points : 0
- Joined: 2010/07/03 14:30:32
- Status: offline
- Ribbons : 22
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 07:23:46
(permalink)
|
jinihammerer
FTW Member
- Total Posts : 1151
- Reward points : 0
- Joined: 2009/09/20 00:37:47
- Location: Texas
- Status: offline
- Ribbons : 8
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 07:27:28
(permalink)
My Affiliate Code: EB1-UCY-VA9N
|
cokeman54
SSC Member
- Total Posts : 962
- Reward points : 0
- Joined: 2002/04/02 14:18:49
- Location: Abilene, Texas
- Status: offline
- Ribbons : 3
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 08:36:27
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 08:47:33
(permalink)
|
jinihammerer
FTW Member
- Total Posts : 1151
- Reward points : 0
- Joined: 2009/09/20 00:37:47
- Location: Texas
- Status: offline
- Ribbons : 8
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 08:58:11
(permalink)
I have it sitting on cardboard on top of the rack shelf, power supply sitting under the shelf. I have pictures of it someplace. This is when i had the ankle biters in it and this is when i put the g34 in it http://forums.evga.com/fb.ashx?m=1961328
My Affiliate Code: EB1-UCY-VA9N
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 09:07:10
(permalink)
|
jinihammerer
FTW Member
- Total Posts : 1151
- Reward points : 0
- Joined: 2009/09/20 00:37:47
- Location: Texas
- Status: offline
- Ribbons : 8
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 09:23:50
(permalink)
My Affiliate Code: EB1-UCY-VA9N
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 10:02:06
(permalink)
Put it all together I might as well put both the P2 and P4 in one rack system. Thanks jinihammerer for the idea of a rack mount way. Here's what I ordered to put it all together. Tripp Lite SR12UB 12U Rack Enclosure Server Cabinet Doors and Sides 300lb Capacity I will put the Folding EVGA 2P at the bottom and then the Folding EVGA 4P on this Shelf upside down and will mount the Motherboard on it. Tripp Lite SRSHELF2P Rack Enclosure Cabinet Cantilever Fixed Shelf 60lb Capacity 2URM
post edited by bcavnaugh - 2013/08/17 10:03:10
|
clo007
CLASSIFIED ULTRA Member
- Total Posts : 5274
- Reward points : 0
- Joined: 2006/02/09 11:20:25
- Status: offline
- Ribbons : 11
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 10:07:15
(permalink)
|
jinihammerer
FTW Member
- Total Posts : 1151
- Reward points : 0
- Joined: 2009/09/20 00:37:47
- Location: Texas
- Status: offline
- Ribbons : 8
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 10:15:53
(permalink)
You can order standoffs if you want and mount the MB to the shelves. i didn't do that yet but there is plenty of airflow the way i have it rigged. I have a floor fan sucking air out of the back of the rack 2 fans in the top of the case blowing cool air in on the cpu's. I wish I would have went 10 u myself, I would have the ankle biter going too, but the G34 was an unexpected purchase. 12u should give you plenty of room.
My Affiliate Code: EB1-UCY-VA9N
|
Grandpa_01
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2012/04/28 20:59:00
- Status: offline
- Ribbons : 0
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 10:18:23
(permalink)
When the MP bug bites there can be lots of unexpected purchases in a persons future.
|
harrier808
Superclocked Member
- Total Posts : 142
- Reward points : 0
- Joined: 2013/03/05 00:05:35
- Status: offline
- Ribbons : 1
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 11:07:11
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re:4P Folding Rig SUPERMICRO H8QGL-IF 4 Amd Opteron Model 6272 & 32 GB DDR3 PC3-10600 Memo
2013/08/17 12:23:25
(permalink)
harrier808
Bc, did you see ab's double dip dip adventure? She's a real beauty.
http://forums.evga.com...903601&high=Tripp+lite
Thanks to jinihammerer I took the rack path and I do remember seeing AB's Rack Setup but did not take it to hart and now I wish I had. It is a Great Looking Setup. Thanks for the reminder and the link to AB's Setup.
|