Yes you can. 
 
But your going to have to purchase a LGA2011 mounting bracket kit which allows you to use that cooler on a compatible motherboard.

Dude I see you got the Asus rampage IV, did you get that x socket??? I might have to get this mother board now if they don't sell this separate.. Was hoping to get an EVGA one but that board looks so good

Yes I used that X-socket feature. Funny, the 2011 socket std backplate looks like an "X", the non-standard one I used W/Megahalems didn't; the marketing info seems backward.
 
Before the switch:

 
Notice the "X" look:

 
Removed socket assy, be very careful, the socket pins are quite vulnerable to the slightest touch here:

 
Notice the 8 thin clear plastic washers. I recommend you be careful not to loose them, and keep them there.
 

 
The Asus "X-socket" backplate is just like the 1366 socket backplate

 
Anyway, yeah I switched out the backplate, first testing the stock tightness of the CPU socket screws, and duplicating that torque as well as I could. One screw seemed a bit loose.
 
The Megahalems mount rear bracket:

 

 
Those barrel bolts were tight against the CPU socket assy when each nub was turned where the nub was closest. The holes in the 2011 socket area for mounting are much larger, allowing room for adjustment. But it worked fine.
 

if your cooler is for 1366 yes the holes is the same 
the différence is hte 2011 is screwed for attach the intel cooler water type H50 corsair  or the xeon cooler ( need holes  screwed )
is the same in SR2 you have the xeons and X58 plate for use the I7 panel cooler waterblock etc