EVGA

1080 Ti Kingpin Extreme Watercooling OC VBIOS

Page: < 12345 Showing page 5 of 5
Author
Post
Essentials Only Full Version
pozzallo
Superclocked Member
  • Total Posts : 137
  • Reward points : 0
  • Joined: 2006/01/19 19:33:49
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2018/11/06 13:48:31 (permalink)
zaphrodbox
pozzallo
Installed my bitspower waterblocks to my Kingpin cards in sli. Temps before on air-cooling while playing Civ 6 were 68' C for top card and 65' C for bottom card. 2038 mhz core 5800 mhz memory. Now on water-cooling 37' C top card and 35' C for bottom card 2050 Mhz core 5900 mhz memory and cards do not down clock for temp while playing Civ 6. I will overclock the cards some more later but great temps on water-cooling. The kingpin cards really need to be put on water to overclock them.


 
Hell yeah!  I guess that answers the question of whether or not BitsPower makes good blocks or not.  I mean, I assumed they would because of their fittings, but there just is not a lot of reviews out there in the wild on their blocks it seems.  Well you made my day, now I really cannot wait to finish up the the design and milling of my water distro plate and get my loop installed.  Thanks for posting!


I started a new post
 
 
GTX 1080 ti Kingpin in sli watercooled with Bitspower waterblock Temp
 
post edited by pozzallo - 2018/11/06 18:23:42

Threadripper 3960x on PBO  3 alphacool 360 mm radiator 1 60mm thick and 1 30 mm thick and 45 mm thick. 1 280 mm radiator is 30 mm thick, Alphacool  pump and reservior  and a new Alphacool Elisblock XPX Aurora Pro cpu block
Gigabytev TRX40 designare
4 Adata XPG SX8200 pro NVMe in raid 0 O/S and games
Samsung 970 evo 2TB NVMe 
2-PLEXTOR PX-1TM8PeY NVMe in raid 0 for games
4-SCANDISK ULTRA 4TB ssd in raid 0 for games
EVGA T2 1600 watt/  128GB Cruical Ballistix  3200mhz@3600mhz same timings
LIAN LI 011 D XL black with Modded front panel for 360 radiator.
Dell Alienware AW3418DW G-sync Monitor 120 hz
2 RTX 2080 SUPER FTW3 HYDRO COPPER 
#121
puterg33k
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2007/11/18 11:42:58
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2019/01/23 21:31:21 (permalink)
Sorry to resurrect this thread but I flashed my kingpin hc to (86.02.39.41.90) and it says I'm doing +150, however; the voltage never moves from passed 1062mV? So confused 
#122
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2019/01/23 22:09:19 (permalink)
puterg33k
Sorry to resurrect this thread but I flashed my kingpin hc to (86.02.39.41.90) and it says I'm doing +150, however; the voltage never moves from passed 1062mV? So confused 


This should help... https://forums.evga.com/G...erburner-m2820280.aspx


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#123
tsakis
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2014/10/05 14:13:40
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/20 13:37:50 (permalink)
Hello Mr sajin i need help with my 1080ti Kingpin..
I have read all the guides etc and all the ways to make an decent OC but i have problems..
When i use the Clasified software for plus voltage my clocks are falling down...I dont have EVbot i have only connect the usb2 header..
My stable clocks are +40 core and +500 memory ...i need something at least 2100MHz or  2150MHz ! when i manage to do it i am going to buy a waterblock so i can have low temps !
Sajin
Benefits:
  1. Higher fan speeds.
  2. 150% power target.
  3. It will prevent you from running into the 118% power limit in unigine superposition as shown .
You can download it .
 
Note: Nvflash is included with the vbios. 
 
How to flash the extreme watercooling oc vbios to your kingpin...
 
#1 Drag and drop the nvflash folder onto your desktop.
#2 Shutdown your pc.
#3 Unplug pc from wall socket.
#4 Hold case power on button for 30 seconds.
#5 Locate the vbios selector switch on the video card & move it to one of the other vbioses other than normal. I'd recommend putting the vbios on the oc switch to retain thermal protection, but you can put it on the ln2 switch if you want to disable thermal protection.

#6 Plug pc back into wall & boot the system.
#7 You're ready for flashing...



Flashing procedure:

#1 Run command prompt via administrator. 
- Windows 7: Press the start button and type "cmd", right click "cmd" and select run as administrator.  
- Windows 8/10: Press the Windows Key & X keys together, select command prompt (admin) from the menu that pops up.
#2 Type the following commands into the command prompt... "cd  c:\users\your windows user name here\desktop\nvflash" without quotes and hit enter. 
- Type "nvflash64 --protectoff" without quotes and hit enter. (Turns off write protection on the card. Some cards will need to have this disabled before you can flash the card so always perform this command before flashing.) 
- Type "nvflash64 -6 6798X390.rom" without quotes and hit enter. 
#3 You'll be asked if you want to override/update the display adapter firmware. Press "Y" on your keyboard to say yes. Nvflash should now start to flash the ftw3 hyrbid vBIOS to the card and complete by saying the flash was successful. 
#4 Restart PC. The nvidia drivers should automatically detect and install the card, if not, you may need to uninstall the drivers and re-install them.




Can you help me please ?
My rig is
i9 10900K on hydro EK AIO D-RGB 360
16GB ram 4400
Asus z490 hero
850 watt corsair Gold
#124
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/20 16:05:03 (permalink)
Running 1.2v on the core via the classified tool along with running the xoc vbios (requires contacting Vince aka Kingpin) to get it should get you there.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#125
tsakis
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2014/10/05 14:13:40
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/20 16:33:09 (permalink)
Is there any email so i can contact him ?
i have to send him serial number ?
Thank you very much for the help :-)
#126
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/20 18:05:06 (permalink)
Sent you a pm.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#127
tsakis
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2014/10/05 14:13:40
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/22 02:48:42 (permalink)
Sorry i cant pm you because i have under 10 posts :D
Thnx for the help..I just sit and wait for the holy bios :D
I want to ask you for the silicon lottery...I think my Kingpin is not so good ...The best MHz on core is 2050 from that point and over 3dmark crashes..Is this normal ? I am on average ? i see here some guys made 2100MHz !!!!! My temps are very low but still 2050MHz with 1.093V is my best !
#128
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/22 11:34:01 (permalink)
IIRC the best I could do with mine at 1.093 was 2085, and then once I used 1.2v and was able to do 2152.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#129
tsakis
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2014/10/05 14:13:40
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/25 07:33:06 (permalink)
Sorry for my anticipation but still nothing :(  5th day :(
Is there any other way to find it ? etc  some forums  or something else..
#130
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/25 11:46:48 (permalink)
Nope. You can only get it through Vince. You could try sending him a pm here on the forums.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#131
tsakis
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2014/10/05 14:13:40
  • Status: offline
  • Ribbons : 0
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/26 13:02:39 (permalink)
Can you tell me please the name of mister Vince at the forum  ?
#132
Sajin
EVGA Forum Moderator
  • Total Posts : 49199
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: 1080 Ti Kingpin Extreme Watercooling OC VBIOS 2020/09/26 13:10:23 (permalink)
https://forums.evga.com/Profile/278092/


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#133
Page: < 12345 Showing page 5 of 5
Jump to:
  • Back to Mobile