bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 09:00:42
(permalink)
So your GPU is installed in the Slot that is Next to the CPU Socket?
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/20 09:02:01
(permalink)
bcavnaugh
So your GPU is installed in the Slot that is Next to the CPU Socket?
yeah , the top slot
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 09:02:38
(permalink)
Install the video capture card in the bottom Slot. When making this type of change you should Re-Set your Bios as well. To Force Read the PCIe Lanes/Slots Also if you are running the ROG Software Turn it off for now to remove it from your Troubleshooting.
post edited by bcavnaugh - 2019/04/20 09:05:24
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/20 09:04:00
(permalink)
no chance for that , the cooler is installed at the bottom and the case is a mid tower , maybe if the mobo was ATX
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 09:06:49
(permalink)
kingx11
no chance for that , the cooler is installed at the bottom and the case is a mid tower , maybe if the mobo was ATX
OK then the Second Slot from the Bottom. (What is this video capture card?) Now you can understand why we need a complete list of your Hardware when asking to help you Troubleshoot. So you have the Tubes for the Hybrid Below the Graphics Card? Are you running Version 0602 2019/04/11 of the Motherboard Bios?  or 
post edited by bcavnaugh - 2019/04/20 12:05:47
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 09:19:58
(permalink)
What is this Video Capture Card?
Normally when you have a video capture card you should remove the Software and Card then install your new Graphics Card and Drivers.
Then Install the Video Capture Card back in your computer and the Drivers and Software for it.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: small issue with KingPIN 2080ti
2019/04/20 11:58:54
(permalink)
bcavnaugh
kingx11
no chance for that , the cooler is installed at the bottom and the case is a mid tower , maybe if the mobo was ATX
OK then the Second Slot from the Bottom. (What is this video capture card?)
Now you can understand why we need a complete list of your Hardware when asking to help you Troubleshoot.
So you have the Tubes for the Hybrid Below the Graphics Card?
Are you running Version 0602 2019/04/11 of the Motherboard Bios?
That was Rampage VI Extreme I think he have other full black version Omega. Different position of x4 PCI-E slot.  He should use video capture card with USB Port.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 12:07:55
(permalink)
Vlada011
bcavnaugh
kingx11
no chance for that , the cooler is installed at the bottom and the case is a mid tower , maybe if the mobo was ATX
OK then the Second Slot from the Bottom. (What is this video capture card?)
Now you can understand why we need a complete list of your Hardware when asking to help you Troubleshoot.
So you have the Tubes for the Hybrid Below the Graphics Card?
Are you running Version 0602 2019/04/11 of the Motherboard Bios?
That was Rampage VI Extreme I think he have other full black version Omega.
Different position of x4 PCI-E slot.
He should use video capture card with USB Port.
Video Capture Card with a USB Port? What has this to do with using PCIe Slots?
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: small issue with KingPIN 2080ti
2019/04/20 12:10:47
(permalink)
I know his card is PCI-E, but maybe is only chance that to use capture card, to look for model with USB. If can't connect in x4 and in x8/16 make problems. In all of others PCI-E slots on RVIEO capture card occupy 16 PCI-E lanes or 8 depend how ASUS configure them.
post edited by Vlada011 - 2019/04/20 12:12:58
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/20 12:10:50
(permalink)
Sometimes it is like pulling Teeth to get to the Bottom of the Question in hand. ASUSTeK COMPUTER INC. ROG RAMPAGE VI EXTREME OMEGA comes from here https://www.3dmark.com/3dm/35515971
post edited by bcavnaugh - 2019/04/20 12:12:53
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: small issue with KingPIN 2080ti
2019/04/20 12:17:22
(permalink)
Maybe he have some 4K 60fps PCI-E video capture card.
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/20 12:18:34
(permalink)
bcavnaugh
kingx11
no chance for that , the cooler is installed at the bottom and the case is a mid tower , maybe if the mobo was ATX
OK then the Second Slot from the Bottom. (What is this video capture card?)
Now you can understand why we need a complete list of your Hardware when asking to help you Troubleshoot.
So you have the Tubes for the Hybrid Below the Graphics Card?
Are you running Version 0602 2019/04/11 of the Motherboard Bios?
or
i never had this issue when i had R6E (top) when i used to have a video capture card + Creative sound card but it seems to be a problem when i got the Omega , never in my life that i encountered a problem like this , but this time around it seems to be an issue with the Mobo itself not the GPU
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/20 12:20:28
(permalink)
bcavnaugh
What is this Video Capture Card?
Normally when you have a video capture card you should remove the Software and Card then install your new Graphics Card and Drivers.
Then Install the Video Capture Card back in your computer and the Drivers and Software for it.
Avermedia 4k live gamer , for 4K 60FPS HDR video capturing , also it breaks the HDCP on many TV box set receivers
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10257
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: small issue with KingPIN 2080ti
2019/04/20 15:39:17
(permalink)
One of best video capture card, it's shame not to keep them with X299 platform. You should RMA board or back board. On first place you shouldn't change Rampage VI Extreme. But I have no right to tell you because I changed RVE for RVE10. RVE10 have x1 slot for sound, x4 slot for PCI-E SSD or Video Capture card. Only I got few important improvements, you get only different motherboard and I didn't payed full priced, I got good deal in that moment, under different circumstances I would never payed even 150 euro more to replace RVE for RVE10. Explain to ASUS what's happen, careful on their forum. With 650$ worth motherboard they should tried 50 options if need and install all kind of cards on motherboard and check compatibility. It's not solution to remove video capture card only to use Omega motherboard. ASUS ROG customers on so expensive motherboards launching them one after another. Launching Omega motherboard is not respect of people who invested in Rampage VI Extreme and want at least 2 years to have top motherboard.
post edited by Vlada011 - 2019/04/20 15:42:36
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: small issue with KingPIN 2080ti
2019/04/22 18:35:54
(permalink)
I was having this issue at first when I was running my card on the OC BIOS out of the box. I switched to Normal, then back to OC and switched out my cables for new ones and I haven't had an error like this show up since.
I don't really know what was causing my issue considering that my Kingpin is the only card I have in my motherboard.
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: small issue with KingPIN 2080ti
2019/04/22 19:48:14
(permalink)
unless I missed it, I would go back and do what Tin_EE asked you to do. Check the 12 volts rail. Both with and without the video capture card installed.
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
Mmadrid434
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2019/04/08 13:29:49
- Location: California
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/27 15:17:41
(permalink)
No idea. Hope it all works out.
Ryan Tom ⚾ Twitch Twitter Instagram YoutubeFortnite Professional- Baysoldier StandingsFormer Gears Of War Professional 07-14-2018: 2 nd Summer Skirmish Week 1-Prize- $18,750 09-03-2018: 21 st Summer Skirmish Week 8-Prize- $5,000 10-03-2018: 1 st Fall Skirmish Week 2-Prize $1,250 10-23-2018: 4 th -Fall Skirmish Week 5-Prize $5,000 10-28-2018: 10 th-Fall Skirmish Week 6-Prize-$11,250 10-28-2018: 3 rd -Fall Skirmish Club - Prize $7,500
|
aylan196
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2011/08/31 01:47:48
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/28 05:42:00
(permalink)
Hi I have the same issue after installing ASUS 1200 thore psu tried every suggestions here no go same 12v input too high warning What is strange is before the ASUS psu I had Corsair 1200 my volts never sustained 1.094 only 1.050 now on ASUS psu iam holding that1.094 volt strong ....strange ?! Hope this 12v input too high warning can be explained here Thanks Update : Issue resolved changing pcie locations Still higher volts on ASUS psu 1.081 1.094 Which was not obtained with Corsair psu
post edited by aylan196 - 2019/04/28 10:56:44
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/28 13:19:08
(permalink)
aylan196
Hi I have the same issue after installing ASUS 1200 thore psu tried every suggestions here no go same 12v input too high warning
What is strange is before the ASUS psu I had Corsair 1200 my volts never sustained 1.094 only 1.050
now on ASUS psu iam holding that1.094 volt strong ....strange ?!
Hope this 12v input too high warning can be explained here
Thanks
Update :
Issue resolved changing pcie locations
Still higher volts on ASUS psu 1.081 1.094
Which was not obtained with Corsair psu
Let's hope you changed ALL the Cables and are Not Mixing them between Corsair and ASUS Power Supplies. Are you using 3 Completely Separate PCIe Power Cables and Only Using One Pigtail From Each Cable?
|
aylan196
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2011/08/31 01:47:48
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/28 18:58:33
(permalink)
bcavnaugh
aylan196
Hi I have the same issue after installing ASUS 1200 thore psu tried every suggestions here no go same 12v input too high warning
What is strange is before the ASUS psu I had Corsair 1200 my volts never sustained 1.094 only 1.050
now on ASUS psu iam holding that1.094 volt strong ....strange ?!
Hope this 12v input too high warning can be explained here
Thanks
Update :
Issue resolved changing pcie locations
Still higher volts on ASUS psu 1.081 1.094
Which was not obtained with Corsair psu
Let's hope you changed ALL the Cables and are Not Mixing them between Corsair and ASUS Power Supplies.
Are you using 3 Completely Separate PCIe Power Cables and Only Using One Pigtail From Each Cable?
Yes separate cables and not mixed
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/29 08:21:18
(permalink)
aylan196
bcavnaugh
aylan196
Hi I have the same issue after installing ASUS 1200 thore psu tried every suggestions here no go same 12v input too high warning
What is strange is before the ASUS psu I had Corsair 1200 my volts never sustained 1.094 only 1.050
now on ASUS psu iam holding that1.094 volt strong ....strange ?!
Hope this 12v input too high warning can be explained here
Thanks
Update :
Issue resolved changing pcie locations
Still higher volts on ASUS psu 1.081 1.094
Which was not obtained with Corsair psu
Let's hope you changed ALL the Cables and are Not Mixing them between Corsair and ASUS Power Supplies.
Are you using 3 Completely Separate PCIe Power Cables and Only Using One Pigtail From Each Cable?
Yes separate cables and not mixed
What are you running that Can Keep the Card at a Sustained 1.094. I have tested a lot of tools and apps and I have see 1.094 for a minute or two but never Locked at 1.094 for hours on end. So far how are you liking your EVGA GeForce RTX 2080 Ti K|NGP|N? Are you setting or using the Classified Tool? I am now seeing 48x Watts on some Benchmarks but only seeing 1.06 and 1.07 with peaks to 08 and 09
post edited by bcavnaugh - 2019/04/29 08:30:27
|
aylan196
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2011/08/31 01:47:48
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/29 08:32:13
(permalink)
I changed the psu from Corsair to ASUS psu due to issues with the Corsair before installing the ASUS psu I am on 1.50v 1.044v now with ASUS 10.81v 1.094v without classified tool just slide the power target full and voltage full
Regarding the card it’s a a joy to work with such a master piece it’s got more power but need a learning curve and no cards are the same
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/29 08:35:41
(permalink)
aylan196
I changed the psu from Corsair to ASUS psu due to issues with the Corsair before installing the ASUS psu I am on 1.50v 1.044v now with ASUS 10.81v 1.094v without classified tool just slide the power target full and voltage full
Regarding the card it’s a a joy to work with such a master piece it’s got more power but need a learning curve and no cards are the same
I would think the other PSU is just a better one than the other. How Old was the Corsair PSU? "without classified tool" Nice! This is the PSU I am using for mine: EVGA SuperNOVA 1600 T2, 80+ TITANIUM 220-T2-1600-X1 So far the Peak Wattage Usage on my UPS Unit was 704 Watts Running Fire Strike.
post edited by bcavnaugh - 2019/04/29 08:39:18
|
aylan196
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2011/08/31 01:47:48
- Status: offline
- Ribbons : 0
Re: small issue with KingPIN 2080ti
2019/04/29 12:51:17
(permalink)
The Corsair psu is about 4 years old On ASUS psu I average At 500 watts with overclocked 9900k 5.1ghz and kingpin 2220hz clock and 8300mhz memory
post edited by aylan196 - 2019/04/29 12:56:23
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: small issue with KingPIN 2080ti
2019/04/29 12:55:28
(permalink)
aylan196
The Corsair psu is about 4 years old
On ASUS psu I average At 500 watts with overclocked 9900k 5.1ghz and kingpin 220hz clock and 8300mhz memory
I would say it was because of the Age them.
|