New Updates for Z390 Motherboards today: BIOS 1.07 (E399 Dark) / 1.08 (E397 FTW)Update OC support for future CPUAdd 32GB memory module to support list
Windows Installation Download the correct .zip file below for your motherboard: 131-CS-E399-KR - EVGA Z390 Dark - v1.07 123-CS-E397-KR - EVGA Z390..
Coming soon! https://www.evga.com/arti...evga-z390-motherboard/..
These BIOS updates were added a couple weeks ago, so this is just to add them to the forums:
BIOS 1.14/1.13/1.12 Updates Update CPU Microcode and add OC Support for future CPUUpdate Intel RST to 126.96.36.1992 for Intel security issueFix UEFI mode with no display after installing Intel graphics driv..
New Updates for H370/B360 Motherboards today: BIOS 1.07 (H370 Stinger) / 1.07 (B360 Micro Gaming)Update CPU MicrocodeFix minor issues**Updates/corrects fan header information in the BIOS, and fixes an issue where users could not reset a BIOS password.
Windows Installation Download the correct .zi..
Don't forget to check out these Featured Products, Bundles and Motherboards while supplies last!
Also, use an Associate Code for more savings!
Need a Discount Code for more savings on purchases like a Motherboard, Graphics Card, Power Supply, Sound Card, Cooler, Case, etc? You're more than welcome to use my Associate Code during checkout as seen below. Associate Code: LMD3DNZM9LGK8GJ https://i.imgur.com/0bwseZv.jpg Buyer Discount Rates htt..
Just wanted to see if it was intentional that you can't disable EIST/Speedshift and have turbo mode enabled. Thought it was odd since I am able to do so on other boards. Also spread spectrum, been reading that it may cause some stuttering and stability issues with high overclocks? Might be false, ma..
looking to increase my tjmax setting for the cpu im running 5.3ghz all core 0 avx but my temps under cinebench after a few days uptime can go around 90c with spikes of 95 its getting close to the tjmax which would cause a quick shutdown i just want to raise it to like 110c or 115c like on my msi boa..
Hello, I had a setup with 2x 1080 Ti and a WD SN750 Black with heatsink installed in the lower m2 slot (PM2). I recently installed another M.2 of the same type in the upper slot (PM1). Both disks are showing fine with no problems from windows and from SSD dashboard. Both are at PCIe 3 x4 as per the ..
Good morning/day/evening EVGA community, Just recently I had experienced a GPU failure (no image output on multiple systems) which is to be RMA‘d this week. Now, after the GPU had died I am having trouble with my system RAM(Ballistix Elite 16GB (8GBx2) DDR4-4000 UDIMM) or(?) the motherboard (EVGA Z3..