Hey y'all trying to solve my computer issue of kernel panic - Event 41 (63). Computer will just turn off no (BSOD)


Build - 
CPU: AMD Ryzen 9 7950X 4.5 GHz 16-Core Processor
CPU Cooler: NZXT Kraken Elite 360 RGB 78.02 CFM Liquid CPU Cooler
Motherboard: Gigabyte B650 AORUS PRO AX ATX AM5 Motherboard
Memory: G.Skill Flare X5 64 GB (2 x 32 GB) DDR5-5600 CL36 Memory
Storage: Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive (boot drive)
Storage: Seagate Exos X14 14 TB 3.5" 7200 RPM Internal Hard Drive
Storage: Seagate Exos X14 14 TB 3.5" 7200 RPM Internal Hard Drive
Video Card: Asus TUF GAMING OC GeForce RTX 4090 24 GB Video Card
Case: Lian Li O11 Vision ATX Mid Tower Case
Power Supply: EVGA SuperNOVA 1000 GT 1000 W 80+ Gold Certified Fully Modular ATX Power Supply
Operating System: Microsoft Windows 11 Home OEM - DVD 64-bit
 
Trouble shooting process to date
⁃ Fresh install of windows ( July 31st )
⁃ Turned off eco mode on PSU (Aug 1st 10am pst)
⁃ [Computer powered off its self ]
⁃ [Computer cut power to USBs but was still on, couldn't get any of the usbs to work mouse or keyboard to work. This has happend before but usually shuts off after. I hard shut down after a few hours of waiting.]
⁃ Removed 1 sticker of ram, running 1 stick out of slot 2 (Aug 1st 7:15pm pst)
⁃ [Computer powered off its self Aug, 2nd middle of the night]
⁃ Swapped to running 1 stick out of the 4th slot (Aug 2nd, 7:30am pst)

Would love any insight on how i can try to pin point this issue. Is it a faulty PSU or MOBO?

Thanks in advance.

It could be either the motherboard or PSU.
The USB problem seems like a motherboard or USB device issue to me. I don't think it would be a PSU issue for that one, because the motherboard USB power should be stepped down from 12v power which is obviously still present and working for other devices.  I would suspect that you have a bad USB device, bad USB cable, a case alignment or standoff issue which is shorting a USB port on the case, or a motherboard fault.  When a USB port goes 'dead' temporarily, it is usually because a polyfuse tripped due to overcurrent and needs to be reset by powering off and back on.
If you didn't mention the USB thing, I would think it is more likely a PSU issue, but now I think you have a motherboard or computer assembly issue.
I would take the motherboard out and look for burn marks on the back of the motherboard and computer case tray and standoffs. I would also look for burn marks around the USB ports and case IO area.  If you find nothing wrong, I would try the computer with the bare minimum number of USB devices.