Hackslash
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2013/05/11 06:25:00
- Status: offline
- Ribbons : 0
see above
how can i do that?
core voltage cant be reduced in precision?!
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: how to undervolt ftw ultra 3080 ?
2020/10/16 16:18:31
(permalink)
|
Hackslash
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2013/05/11 06:25:00
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/17 01:33:43
(permalink)
kevinc313
thats great but doesnt help. where can i lower the core voltage?
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: how to undervolt ftw ultra 3080 ?
2020/10/17 02:20:29
(permalink)
You control voltage by using a Voltage curve and setting it so it can never go higher than a set Voltage. That's undervolting.
|
Reedey
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2020/10/10 04:56:12
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/17 22:21:02
(permalink)
Precision X1 sucks for adjusting voltage curves. Use Afterburner instead,
|
Hackslash
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2013/05/11 06:25:00
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/18 01:03:29
(permalink)
Reedey
Precision X1 sucks for adjusting voltage curves. Use Afterburner instead,
Yep did it there, thanks.
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: how to undervolt ftw ultra 3080 ?
2020/10/18 02:13:24
(permalink)
Yes but afterburner sucks at controlling a EVGA fan.
Pick your poison.
|
Hackslash
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2013/05/11 06:25:00
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/18 02:44:42
(permalink)
SlimJ87D
Yes but afterburner sucks at controlling a EVGA fan.
Pick your poison.
Yes I wrote that on the thread about X1 update maybe theyll clone Afterburner?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49135
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: how to undervolt ftw ultra 3080 ?
2020/10/20 11:09:35
(permalink)
KingEngineRevUp
Yes but afterburner sucks at controlling a EVGA fan.
Pick your poison.
Max fans out with precision then close it down, and use afterburner for everything else.
|
Azuroth
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2007/10/29 15:34:19
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/20 17:18:58
(permalink)
You can also apply your custom fan curve with PX1, then open afterburner and apply your voltage curve. Just make sure you don't have the fans set to auto or user controlled in afterburner. Annoying, but it works.
PX1 would be all you need if they would just add a way to lower all points in unison, and apply the current frequency to the rest of the voltages beyond your current point.
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: how to undervolt ftw ultra 3080 ?
2020/10/20 23:25:07
(permalink)
Sajin
KingEngineRevUp
Yes but afterburner sucks at controlling a EVGA fan.
Pick your poison.
Max fans out with precision then close it down, and use afterburner for everything else.
I'd have to do that everytime because on certain reboots, the 3rd fan wouldn't be running at all.
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
Re: how to undervolt ftw ultra 3080 ?
2020/10/20 23:30:26
(permalink)
Azuroth
You can also apply your custom fan curve with PX1, then open afterburner and apply your voltage curve. Just make sure you don't have the fans set to auto or user controlled in afterburner. Annoying, but it works.
PX1 would be all you need if they would just add a way to lower all points in unison, and apply the current frequency to the rest of the voltages beyond your current point.
I'm amazed they haven't added this as a feature with how long Afterburner has had the drag-all feature. I'm running -10% Power Target, the GPU is still boosting to almost 2GHz core, and it's running quite a bit cooler than before, with no noticeable loss in performance (at least not in GTA V Single Player)
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
james2001baby
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/09/26 07:31:01
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 00:43:51
(permalink)
How to -10% Power Target in Afterburner? can anybody teach any step for me please.....
my FTW3 3080 is very hot in gaming(70°), i want my GPU temp lower and fan noise lower too
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 04:01:29
(permalink)
james2001baby
How to -10% Power Target in Afterburner? can anybody teach any step for me please.....
my FTW3 3080 is very hot in gaming(70°), i want my GPU temp lower and fan noise lower too
Just put the power target slider at 90%? That's all I'm talking about, -10% is 90% instead of 100%... sorry if that confused ya.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
streamroller
Superclocked Member
- Total Posts : 112
- Reward points : 0
- Joined: 2009/10/04 03:23:46
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 04:04:58
(permalink)
Dabadger84
james2001baby
How to -10% Power Target in Afterburner? can anybody teach any step for me please.....
my FTW3 3080 is very hot in gaming(70°), i want my GPU temp lower and fan noise lower too
Just put the power target slider at 90%? That's all I'm talking about, -10% is 90% instead of 100%... sorry if that confused ya.
Thats not how Undervolt works. You dont touch PT. First you do -280 core then open VF and start with .900V and 1950 mhz until you crash or 0.875v- 1850mhz
|
Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 04:37:13
(permalink)
streamroller
Dabadger84
james2001baby
How to -10% Power Target in Afterburner? can anybody teach any step for me please.....
my FTW3 3080 is very hot in gaming(70°), i want my GPU temp lower and fan noise lower too
Just put the power target slider at 90%? That's all I'm talking about, -10% is 90% instead of 100%... sorry if that confused ya.
Thats not how Undervolt works. You dont touch PT.
First you do -280 core then open VF and start with .900V and 1950 mhz until you crash or 0.875v- 1850mhz
I know that. He was asking how you do -10% power limit, so I answered :-D I'm not messing with undervolting yet because doing it in Precision is a mess & I really don't feel like having Afterburner up every time I load windows just to apply it. I do find it interesting that the card doesn't seem to suffer from lower clocks when simply lowering the power limit though. Would be neat to see just how low you can go on Power Target + VF curve and still maintain stability at 1900+ actual boost clock.
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
streamroller
Superclocked Member
- Total Posts : 112
- Reward points : 0
- Joined: 2009/10/04 03:23:46
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 05:06:22
(permalink)
Dabadger84
streamroller
Dabadger84
james2001baby
How to -10% Power Target in Afterburner? can anybody teach any step for me please.....
my FTW3 3080 is very hot in gaming(70°), i want my GPU temp lower and fan noise lower too
Just put the power target slider at 90%? That's all I'm talking about, -10% is 90% instead of 100%... sorry if that confused ya.
Thats not how Undervolt works. You dont touch PT.
First you do -280 core then open VF and start with .900V and 1950 mhz until you crash or 0.875v- 1850mhz
I know that. He was asking how you do -10% power limit, so I answered :-D I'm not messing with undervolting yet because doing it in Precision is a mess & I really don't feel like having Afterburner up every time I load windows just to apply it.
I do find it interesting that the card doesn't seem to suffer from lower clocks when simply lowering the power limit though. Would be neat to see just how low you can go on Power Target + VF curve and still maintain stability at 1900+ actual boost clock.
Afterburner stores your VF data to firmware. So lets say you tick Apply overclock at startup and start minimized you dont have to deal with afterburner anymore. Even further if i close afterburner OFF the VF data still stored. You can check cuz in PX1 you see your afterburner VF curve in precision :) i am so happy with .900V 1995mhz ^^
|
james2001baby
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/09/26 07:31:01
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 07:29:56
(permalink)
Thank you every one, i set 0.950V 2010mhz, now my GPU temp in gaming is 73-74, this is better than before temp 78!!
Good for FTW3 3080!! Good for RGB~~
|
TeslaDev
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2015/07/31 07:24:25
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 08:00:44
(permalink)
Best undervolt I could get is 0.925v at 1935. 0.900v ran stable at 1905. 0.950-0.975 wouldn't hold 1950 stable. 1.000V and I was back in upper 70s temp-wise so it was throttling down and doing worse than my 0.925v @1935. RIP my ftw3 "ultra" bin.
post edited by TeslaDev - 2020/10/21 08:17:25
|
james2001baby
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/09/26 07:31:01
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 08:50:17
(permalink)
I follow your 0.925v at 1935, now my GPU temp is 68! is very cool!
|
TeslaDev
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2015/07/31 07:24:25
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 09:23:02
(permalink)
james2001baby
I follow your 0.925v at 1935, now my GPU temp is 68! is very cool!
Good to hear. Yep, it tends to run 65-70 for me depending on the game/test. I can't run stock without seeing 80C and bouncing off the power limit (makes the clocks jump all over the place). Increasing power limit just makes the heat go through the roof, adds to stability, but my clocks drop to 1800s. 011D with 3 bottom intake fans...and more aggressive fan curve than the aggressive preset. This card is rough.
|
Delwyn69
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2016/06/20 09:44:07
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 23:42:00
(permalink)
Undervolting is amazing, doesn't seem to work while overclocking though. I tried the same method with Afterburner, only pushed 2130 and 975mv or 1V as the highest point and it would either crash or wouldn't be able to hold that fequency, even with higher power target.
I guess that was to be expected?
|
yaggaz
FTW Member
- Total Posts : 1510
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 23:46:09
(permalink)
james2001baby
I follow your 0.925v at 1935, now my GPU temp is 68! is very cool!
Did you happen to notice much of an FPS loss after?
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
yaggaz
FTW Member
- Total Posts : 1510
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/21 23:47:36
(permalink)
Dabadger84
Would be neat to see just how low you can go on Power Target + VF curve and still maintain stability at 1900+ actual boost clock.
That just got me wondering. What is the benefit of undervolting vs just lowering the clock speeds in Precision?
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
james2001baby
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2020/09/26 07:31:01
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/22 00:47:22
(permalink)
1.I can't feel the fps drop in gaming, maybe a little fps loose.. 2.GPU undervolt is use to GPU temp down for me(68°), because my FTW3 3080 is too hot in gaming stage(78°)
post edited by james2001baby - 2020/10/22 00:50:23
|
yaggaz
FTW Member
- Total Posts : 1510
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: how to undervolt ftw ultra 3080 ?
2020/10/22 13:40:00
(permalink)
james2001baby
1.I can't feel the fps drop in gaming, maybe a little fps loose..
2.GPU undervolt is use to GPU temp down for me(68°), because my FTW3 3080 is too hot in gaming stage(78°)
Yeah I feel ya. I have to cap my modern games at 90 or 100fps otherwise it hits 84c and throttles. I should try the undervolting. Thanks for the inspiration!
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
Vrbas
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2012/09/05 21:25:29
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/22 20:21:32
(permalink)
Just tried this. .850v @1905 seems stable so far. Temps went from 80c to 72c!
|
Arkiverge
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2020/10/03 08:48:02
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/30 06:18:13
(permalink)
I haven't pushed it, but out of the box 0.850 @ 1950 with +400 memory is stable (temps down from 73 to 66 on stock cooler in a Fractal R5). This is a Gigabyte Gaming OC 3080.
|
Axejess
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2013/04/22 13:27:39
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/10/30 06:46:24
(permalink)
|
Robleesaunders
New Member
- Total Posts : 50
- Reward points : 0
- Joined: 2020/09/22 08:34:30
- Status: offline
- Ribbons : 0
Re: how to undervolt ftw ultra 3080 ?
2020/11/03 08:35:13
(permalink)
Do I have to control fans with Afterburner? I want to set my FTW3 at OC setting so the fans use a aggressive curve, yet I want to under volt with afterburner. Is this possible?
|