EVGA

dg77 LEd's

Author
Post
Essentials Only Full Version
danperry13
Superclocked Member
  • Total Posts : 114
  • Reward points : 0
  • Joined: 2014/07/08 19:30:43
  • Status: offline
  • Ribbons : 4
2019/03/12 16:35:52 (permalink)
 Both the sata and the usb header is connected - and the DG software still cannot detect a "usb Hid" device? 
- I installed the software through a forum link is there a newer version or something i'm missing here possibly the 3.0 connector? 

The connectors a female lead - my motherboard is also a female lead and i don't have a converter could this be the problem?
post edited by danperry13 - 2019/03/12 16:58:22
#1

9 Replies Related Threads
    danperry13
    Superclocked Member
    • Total Posts : 114
    • Reward points : 0
    • Joined: 2014/07/08 19:30:43
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/12 16:52:58 (permalink)
    tried a reboot still not finding the USB device.
     
    post edited by danperry13 - 2019/03/12 16:59:04
    #2
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31350
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: dg77 LEd's 2019/03/12 17:02:07 (permalink)
    I did not have time to read all of these but they do Good Reviews -- might find answer your looking for
     

    EVGA DG-77 Mid-Tower Chassis Review
     
     
     DG77 Review by HardwareCanucks  Posted on the Forums
     
     

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #3
    danperry13
    Superclocked Member
    • Total Posts : 114
    • Reward points : 0
    • Joined: 2014/07/08 19:30:43
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/12 17:06:42 (permalink)
    Cool GTX
    I did not have time to read these but they do Good Reviews -- might find answer your looking for
     

    EVGA DG-77 Mid-Tower Chassis Review
     
     DG77 Review by HardwareCanucks  Posted on the Forums
     
     




    I'll take a look - just installing the beta sofware to see if that resolves the connection issue.  Nope still an issue. im going to give support a call.
    #4
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31350
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: dg77 LEd's 2019/03/12 17:08:54 (permalink)
    danperry13
    Cool GTX
    I did not have time to read these but they do Good Reviews -- might find answer your looking for
     

    EVGA DG-77 Mid-Tower Chassis Review
     
     DG77 Review by HardwareCanucks  Posted on the Forums
     
     




    I'll take a look - just installing the beta sofware to see if that resolves the connection issue.  Nope still an issue. im going to give support a call.



    BINGO ---> SATA power connector for that, and the USB 2.0 cable is used to control it. 



    Page 4  (excerpt)

    Flipping the chassis onto its roof, and looking up by the I/O panel, we see a bonus addition to the DG-77. This is an RGB control center for the chassis. It allows any RGB device to be added into the loop, and with K-Boost software, they are all controlled at once
     

    To power the RGB LED control panel, EVGA uses a SATA power connector for that, and the USB 2.0 cable is used to control it. In the other section, which comes from the front I/O panel, we have the HD Audio, native USB 3.0, and the switch and LED leads.



    Page 7 software EVGA DG Tuner
     

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #5
    danperry13
    Superclocked Member
    • Total Posts : 114
    • Reward points : 0
    • Joined: 2014/07/08 19:30:43
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/12 19:13:28 (permalink)
    The 2.0's apparently won't control it, I guess I have to get a female to male converter for the 3.0 cable as my asus board has a female end and so does the dg77 case... shrug.
    #6
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31350
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: dg77 LEd's 2019/03/13 17:53:06 (permalink)
    This is what the review mentions
     
    looks like LED headers on this LED control board - with USB 2.0 Input
     
    USB output for Case if needed


     
     



    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #7
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 8899
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/13 21:29:24 (permalink)
    Seems odd that the motherboard has female but clearly in that case it’s worth getting the converter. The other option would be getting a converter to run it out the back to a standard USB port but that is probably less then ideal. Or if you want you could get a USB add in card as some have an internal header.
    post edited by Hoggle - 2019/03/13 21:30:45

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #8
    danperry13
    Superclocked Member
    • Total Posts : 114
    • Reward points : 0
    • Joined: 2014/07/08 19:30:43
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/13 22:16:32 (permalink)
    Yea the 2.0 is plugged in from the sounds of it the 2.0 is the rbg controller which allowed the lights to even turn on... But unfortunately the software didn't pick up. I called support and it didn't seem like the guy had a clue.
    #9
    danperry13
    Superclocked Member
    • Total Posts : 114
    • Reward points : 0
    • Joined: 2014/07/08 19:30:43
    • Status: offline
    • Ribbons : 4
    Re: dg77 LEd's 2019/03/14 19:23:32 (permalink)


    2.0.0 doesn't work for the current version of windows ( atleast not for me ) - BUT - 1.07 does  ! so if anyone is trying to get their software working try a different product release other than the new one!

    YOU DO NOT NEED THE 3.0 USB cable connected to your motherboard for LED CONTROL - ONLY THE USB 2.0!


    post edited by danperry13 - 2019/03/14 23:51:19
    #10
    Jump to:
  • Back to Mobile