telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Z390 dark, I9-9900k, m.2 970 evo 1 tb. os, gskill 4266 ram xmp, evga g3 1000 watts, evga rtx 2080 ti ftw 3 ultra hydro copper. full water loop cpu and gpu. Will not boot in any of 3 bios, flashed new bios to board and tha did not work. A 6 code.
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5887
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 18
Re: Z390 won't boot A6 code
2019/05/21 05:29:53
(permalink)
weird, the A6 code seems to be "A6 - SCSI Detect".... do you have a SCSI card? Is everything at stock speeds? (note, I'm not saying you're doing anything bad/stupid, etc..just trying to think of things)... (I'm looking at post codes on page 153, here: https://www.evga.com/support/manuals/files/131-CS-E399.pdf)
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
_JoseR
SSC Member
- Total Posts : 826
- Reward points : 0
- Joined: 2014/04/11 09:39:05
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 06:14:50
(permalink)
Have you reset the CMOS?
A6 may be referring to a storage device so I would begin by removing the M.2 SSD and any other storage drives attached to the board.
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 06:52:53
(permalink)
Yes cmos was reset first thing i did. it did not work. Hope some one else has some ideas but looks like I need to drain loop and try to isolate problem. 5.2 ghz when crashed in Port royal Had just run cini bench at 5.2 ghz temps in low 70's and score of 2289 ran at same setting and crashed in Port Royal and thats it.
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 07:00:11
(permalink)
No I don't have a scsi card.
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 07:30:36
(permalink)
Took m.2 out and did not help. Also took 860 evo ssd 1 tb out did not help, took gpu out did not help I will try to replace ram next . Any chance could be power supply ?
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 08:17:25
(permalink)
changed ram out did not help.
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5887
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 18
Re: Z390 won't boot A6 code
2019/05/21 08:37:04
(permalink)
I would try another PSU if you have one, tho I'm reluctant to believe you'd get anything at all if the PSU was bad.
Then I would take everything out of the slots and see if you get the error beep for no vid or memory...put in the memory and see if you get the beep for vid card...then put the vid card in...and see if you get video or beeps or hanging...
I know you have a loop and this is arduous but .... I can't think of anything else.
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 08:52:10
(permalink)
transdogmifier
I would try another PSU if you have one, tho I'm reluctant to believe you'd get anything at all if the PSU was bad.
Then I would take everything out of the slots and see if you get the error beep for no vid or memory...put in the memory and see if you get the beep for vid card...then put the vid card in...and see if you get video or beeps or hanging...
I know you have a loop and this is arduous but .... I can't think of anything else.
Ive tryed all of that but Power supply.
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5887
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 18
Re: Z390 won't boot A6 code
2019/05/21 09:09:06
(permalink)
telehog
transdogmifier
I would try another PSU if you have one, tho I'm reluctant to believe you'd get anything at all if the PSU was bad.
Then I would take everything out of the slots and see if you get the error beep for no vid or memory...put in the memory and see if you get the beep for vid card...then put the vid card in...and see if you get video or beeps or hanging...
I know you have a loop and this is arduous but .... I can't think of anything else.
Ive tryed all of that but Power supply.
hmm. Well, that's the last thing then I'd think the motherboard had an issue...
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5887
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 18
Re: Z390 won't boot A6 code
2019/05/21 09:35:33
(permalink)
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 11:52:20
(permalink)
|
wwxww
iCX Member
- Total Posts : 462
- Reward points : 0
- Joined: 2019/01/13 09:30:51
- Location: New Orleans
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 13:18:06
(permalink)
At some point reinstall windows before RMA or don't. I'd like to RMA mine if I could get the chance. 
|
Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: Z390 won't boot A6 code
2019/05/21 15:40:37
(permalink)
A6 likely just means that the board is waiting for input from you post POST to proceed. Usually it is shown when you are on the Checksum error screen and the BIOS has been cleared.
All new BIOSes show Checksum error by default. It sounds more likely that the card is not displaying at POST (it may have failed in Port Royal).
If you press F1, the board may change over to showing CPU temps on the POST Code screen.
I would recommend draining the loop and doing more testing.
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/21 17:22:39
(permalink)
I Drained loop and got it down to motherboard only. Evga turn down RMA because they said its the CPU thats damaged because it was clocking at 5.2 ghz. Ill check cpu out next.
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/22 16:34:45
(permalink)
Just got a cheap Z390 mother board rog Strix Z390 - E- gaming did not put in case set up as test bench with the I9- 9900-k and it fired right up no probems. Now I have to decide on another Z390 high end board. Z390 dark is de https://www.3dmark.com/fs/19133438ad not the cpu. this I9-9900 k is stable most the time at 5.2 ghz and will run at 5.3 ghz on a lot of benchmark it will not run at 5.4 ghz.
post edited by telehog - 2019/05/22 18:07:31
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/23 10:35:25
(permalink)
Evga ok the RMA after I tested I9 9900 k and worked fine in another board I told them I did not want another Z390 dark and just send Bios chip and ill put that in and see if that fix it. I do like the Bios setting for the Z390 Dark, but have had Bios problems off and on and this one I could not fix . I hope it was just this board. Z390 is a great overclocking board. I did order a Asus maxmius xi apex, the boards our close to the same. Will see how the Apex does and hope the Bios chip fix Z390 Dark. I like Evga Bios setting over Asus.
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5887
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 18
Re: Z390 won't boot A6 code
2019/05/23 10:44:44
(permalink)
telehog
Evga ok the RMA after I tested I9 9900 k and worked fine in another board I told them I did not want another Z390 dark and just send Bios chip and ill put that in and see if that fix it. I do like the Bios setting for the Z390 Dark, but have had Bios problems off and on and this one I could not fix . I hope it was just this board. Z390 is a great overclocking board. I did order a Asus maxmius xi apex, the boards our close to the same. Will see how the Apex does and hope the Bios chip fix Z390 Dark. I like Evga Bios setting over Asus.
Sorry to hear you had issues with the Motherboard....if you decide to sell it (If you can get it to work again), I might be interested ...depending on price.. :/ hahaha
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Z390 won't boot A6 code
2019/05/23 11:03:19
(permalink)
transdogmifier
telehog
Evga ok the RMA after I tested I9 9900 k and worked fine in another board I told them I did not want another Z390 dark and just send Bios chip and ill put that in and see if that fix it. I do like the Bios setting for the Z390 Dark, but have had Bios problems off and on and this one I could not fix . I hope it was just this board. Z390 is a great overclocking board. I did order a Asus maxmius xi apex, the boards our close to the same. Will see how the Apex does and hope the Bios chip fix Z390 Dark. I like Evga Bios setting over Asus.
Sorry to hear you had issues with the Motherboard....if you decide to sell it (If you can get it to work again), I might be interested ...depending on price.. :/ hahaha
If I get it to work and keep working which ever board preforms the best will be my daily and the other will be a test bench.
|