iSpot
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2017/04/09 08:40:05
- Location: Maryland, USA
- Status: offline
- Ribbons : 0
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/16 17:03:47
(permalink)
jmesserfish
Hello! I am looking to do a build with the x99 FTW K and was wondering if the m.2 steps still apply or has it been adjusted in a BIOS release. Meaning does it just recognize it or should I still do these steps? Thanks!
I own the classified version which is about the same as yours, and you should follow this guide to get your m.2 drive to be recognized.
Software Development is Technical Activities conducted by Human Beings! 
|
woodzstack
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2008/08/28 21:55:58
- Status: offline
- Ribbons : 0
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/25 20:51:28
(permalink)
I always do 125 blk then core multi 36. This works at 1.375v with 150 offset for me with 5820K and my 6950X to get 4.4Ghz on ea. m I;ve gone as high as 4.6Ghz on all cores on the 6950X but after running prime 95 a few times in a row, the motherboard's PCH died and so did the bios 1.
On the 5820K nothing above 4.5 was stable, and 4.5 was just too hot to use on passive air cooling. (I hate making noise, my PC is dead silent and uses a NH-D15 and a single 15" Noctua an with 2 low noise adapters...)
my temps are usually 40C-50C. Upwards of high 70's when gaming.
|
RECLUSERICK
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/06/28 00:29:11
- Status: offline
- Ribbons : 0
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/26 05:55:16
(permalink)
I have tried everything but my m.2 drive won't show up on my X99 FTW K. I think the m.2 slot is not working.
|
BrandonS
EVGA Alumni
- Total Posts : 678
- Reward points : 0
- Joined: 2016/01/28 13:52:01
- Status: offline
- Ribbons : 5
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/26 06:39:49
(permalink)
Hello RECLUSERICK, and welcome to the forums! When using an M.2 on an X99 motherboard, make sure that it's an NVMe drive and not SATA. Unfortunately none of our boards will support a SATA M.2, as there are no connections to the SATA controller. Let us know the model M.2 drive you're using, and we should be able to determine if this may be the case.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31127
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 123
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/26 06:45:27
(permalink)
RECLUSERICK
I have tried everything but my m.2 drive won't show up on my X99 FTW K. I think the m.2 slot is not working.
Sorry to see your having an issue with your MB seeing the M.2 drive Since your in this thread, you should have followed all the steps listed, so what now you are asking ? Step 1 - Make sure the M.2 is fully / properly seated Step 2 - confirm your BIOS settings Step 3 - in the X99 MB section of the Forum - start a New Post, request for help, so we do not derail this thread; make sure you list your PC parts and what OS, create a useful / engaging title to catch the eye of those whom many be able to assist you You can also contact EVGA tech support directly
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
RECLUSERICK
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/06/28 00:29:11
- Status: offline
- Ribbons : 0
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/04/26 22:42:24
(permalink)
Thanks for the help. It is a Sata m.2 drive and not a nvme m.2.
|
Gam3r26
Superclocked Member
- Total Posts : 111
- Reward points : 0
- Joined: 2012/09/03 10:53:06
- Status: offline
- Ribbons : 0
Re: X99 M.2 Getting it to work **STEP BY STEP**
2017/04/28 15:57:02
(permalink)
Thx for info it really helps me because I had my eye on the 960 pro Samsung m.2, just was w8ting for price to drop. What is there average price now for a 500GB or 1TB??
|
HarryD
FTW Member
- Total Posts : 1158
- Reward points : 0
- Joined: 2009/09/28 09:23:13
- Location: Connecticut
- Status: offline
- Ribbons : 1
Re: X99 M.2 Getting it to work **STEP BY STEP**
2017/05/06 00:56:53
(permalink)
EVGA X99 Classified Intel i7-5960X 64GB Corsair Dominator 2400MHz DDR4
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/06/08 00:46:13
(permalink)
Nevermind.
post edited by kram36 - 2017/06/08 09:50:27
|
MelonGx
New Member
- Total Posts : 75
- Reward points : 0
- Joined: 2017/08/11 03:35:09
- Status: offline
- Ribbons : 6
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/11 04:24:03
(permalink)
Classified:
Gen2 / SATA & PCIE AHCI, no PCIE NVMe M.2 support
FTW-K, Micro2:
Gen3 / PCIE AHCI & NVMe, no SATA M.2 support
FTW, Micro:
No M.2 Slot M
EVGA H370 Stinger / i7 9700T / 16GB 2667 / 256GB SSD + 1TB HDD / UHD630 / abee 150W DC-ATX / abee acubic S10
|
BrandonS
EVGA Alumni
- Total Posts : 678
- Reward points : 0
- Joined: 2016/01/28 13:52:01
- Status: offline
- Ribbons : 5
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/11 06:58:02
(permalink)
This is, unfortunately, incorrect MelonGx. The Classified, FTW K and Micro 2 all support NVME exclusively, and do not support SATA M.2s.
|
MelonGx
New Member
- Total Posts : 75
- Reward points : 0
- Joined: 2017/08/11 03:35:09
- Status: offline
- Ribbons : 6
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/11 20:46:19
(permalink)
EVGATech_BrandonS
This is, unfortunately, incorrect MelonGx. The Classified, FTW K and Micro 2 all support NVME exclusively, and do not support SATA M.2s.
But why the manual said Classified's M.2 sharing a Gen2 PCIe slot?
EVGA H370 Stinger / i7 9700T / 16GB 2667 / 256GB SSD + 1TB HDD / UHD630 / abee 150W DC-ATX / abee acubic S10
|
BrandonS
EVGA Alumni
- Total Posts : 678
- Reward points : 0
- Joined: 2016/01/28 13:52:01
- Status: offline
- Ribbons : 5
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/12 06:14:08
(permalink)
The Classified uses PCIE NVMe, and not SATA.
|
MelonGx
New Member
- Total Posts : 75
- Reward points : 0
- Joined: 2017/08/11 03:35:09
- Status: offline
- Ribbons : 6
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/12 22:24:26
(permalink)
EVGATech_BrandonS
The Classified uses PCIE NVMe, and not SATA.
OK I quit the discussion since you avoided answering why the Classified's manual saying the M.2 shared a Gen2 PCIe slot. This made it similar to a PCH-based M.2.
post edited by MelonGx - 2017/08/12 22:29:28
EVGA H370 Stinger / i7 9700T / 16GB 2667 / 256GB SSD + 1TB HDD / UHD630 / abee 150W DC-ATX / abee acubic S10
|
BrandonS
EVGA Alumni
- Total Posts : 678
- Reward points : 0
- Joined: 2016/01/28 13:52:01
- Status: offline
- Ribbons : 5
Re: X99 Micro "2" Complete GUIDE Setting it all up !!
2017/08/15 06:11:12
(permalink)
I'm sorry if I wasn't clear enough. Yes, the Classified's M.2 runs on PCH; in this case, however, it's limited to PCIE 2.0 speeds, and is not capable of using SATA. Most early X99 boards were exactly the same; we made some changes to the Micro 2 that allowed it to use CPU lanes instead of PCH, but both are still only capable of using PCIE M.2s.
|
iSpot
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2017/04/09 08:40:05
- Location: Maryland, USA
- Status: offline
- Ribbons : 0
Re: X99 M.2 Getting it to work **STEP BY STEP**
2017/11/18 03:53:14
(permalink)
I'm trying to get my windows to recognize my Samsung m2 drive. I have the X99 Classified. When I enable UEFI, my regular SATA drive, which has windows installed on it, is not recognized anymore, and I do not have the UEFI hidden menu to enable Windows boot manager. Any help is greatly appreciated.
Software Development is Technical Activities conducted by Human Beings!
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84599
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: X99 M.2 Getting it to work **STEP BY STEP**
2017/11/18 04:36:41
(permalink)
You will need UEFI to recognize your M.2 drive. Do you wish to boot from that drive? I recommend a fresh install so use a Windows USB drive or Windows DVD if you have a DVD drive. When the BIOs is set to UEFI and then you install Windows this will create the Windows Boot manager. That will be your primary boot device.
|
smoke1877
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2010/04/02 12:04:50
- Location: Buffalo, NY
- Status: offline
- Ribbons : 0
Re: X99 M.2 Getting it to work **STEP BY STEP**
2018/10/04 18:13:18
(permalink)
just ordered the HP EX920 M.2 1TB PCIe 3.1 x4 NVMe for the x99 classified will i have any issues with this drive and any way i can clone my drive without doing a fresh install? i know the slot is pcie 2.0 x4 so i will get maybe half of the rated Read/Write Speeds up to 3,200 MBps / 1,800 MBps
post edited by smoke1877 - 2018/10/04 18:21:21
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: X99 M.2 Getting it to work **STEP BY STEP**
2018/10/04 20:19:18
(permalink)
Most likely you will, you should do a fresh install of the OS in use and is also noted in the Post above #47.
|
smoke1877
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2010/04/02 12:04:50
- Location: Buffalo, NY
- Status: offline
- Ribbons : 0
Re: X99 M.2 Getting it to work **STEP BY STEP**
2018/10/11 12:03:22
(permalink)
thanks for the help this is about the best i could pull from my hp ex920 with the onboard pcie 2.0 x4 https://imgur.com/a/FL5lpmp it seems much slower then some of the tests i have seen
|