EVGA

Hot!The Scalper-Miner Bot Killer Build/Built to Order CPPC

Page: < 12345.. > >> Showing page 3 of 6
Author
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: Do not even know what to name this... 2021/03/14 15:40:06 (permalink)
Dukman
It's nice to see a CyberPower build that doesn't look cheap and plastic.   Granted you paid extra to guarantee that it doesn't.   Kinda sucks that this is the route many have had to take to get their hands on a 30 series.

Nicely done.   


Now Im going to go play with a configurator just to see how bad it can get.  


Honestly their prices vs everyone else is not bad, MSRP on the parts, when they had a larger supply of GPU's you could pay the extra MSRP difference and get the card you wanted like I did.  Now its all the lottery but you can win paying basically the base model price of a 3080 and end up with an EVGA 3080 FTW3 Ultra same with the 3090. Seen it happen a lot and go :o 

I took their base Black Pearl model and upgraded most of it with better parts, if gigabyte was not so shady with their 850w that would still be in my system. Since CPPC does not have a PSU at 850w that I would trust or would trust at the time, am getting a refund on the psu already sent it in. But I took a 1900 dollar pc at the time now its about 2100 and made it into a 2634 dollar machine shipped so about 400 bucks extra for them to build it and ship it. Upgrade a few things myself because they didn't have what I wanted, set some settings myself, for the price honestly its not bad at all. But with CPPC you better know what you are doing to make the experience as good as mine has been. Really love the setup and cannot wait to take my OEM BR card with the contract CPPC and EVGA has and get my stepup to a 3080 FTW3 Ultra. At that point the build will be done for some years. Just hope the next time I need a gpu upgrade the GPU shenanigans is still not going on. Would be nice to reuse most of this build, love the case, the new psu has been great so far, AIO is solid, Extra fans look cool.

Also been spending a lot of time on their discord helping people. Be it helping people know to register their cards with EVGA and the benefits that brings. To other vendors if they really like their lottery card. To setting things up in the bios from CPU’s to ram, helping people their their hardware cooler with fan configurations, the importance of a quality psu and going beyond the recommended so they have less problems in the distant future as a PSU ages. The important of bios updates when they have issues and how to do it. GPU driver issues. Trouble shooting issues, some come up from them picking a bad psu, or the badge batch of gigabyte parts coming out, to the infamous UPS yeeted my stuff and something broken but don’t know what it is. Have helped a ton of people in my spare time.
post edited by donta1979 - 2021/03/14 15:52:07

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#61
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/15 12:02:15 (permalink)
Getting there slowly.







post edited by donta1979 - 2021/03/16 14:26:29

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#62
sparetimepc
CLASSIFIED Member
  • Total Posts : 2425
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/17 04:39:31 (permalink)
Slow and steady will eventually get to the end




#63
Dukman
FTW Member
  • Total Posts : 1413
  • Reward points : 0
  • Joined: 2009/08/15 09:47:59
  • Location: They keep telling me Zion
  • Status: offline
  • Ribbons : 4
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/17 06:19:09 (permalink)
I see the new LiLi fans.  Did you add something else?

Heatware



 
 
#64
atfrico
Omnipotent Enthusiast
  • Total Posts : 12441
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/17 08:33:12 (permalink)
Looking good much better.

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#65
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/18 19:40:34 (permalink)
Dukman
I see the new LiLi fans.  Did you add something else?

EVGA psu
Lian Li fans
Corsair fans as pull on aio
Zalman fan
Home made 3 pin RGB splitter
GPU support bracket
Got rid of old KB and Mouse replaced with EVGA ones.

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#66
CraptacularOne
Omnipotent Enthusiast
  • Total Posts : 13632
  • Reward points : 0
  • Joined: 2006/06/12 17:20:44
  • Location: Florida
  • Status: offline
  • Ribbons : 189
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/19 09:58:56 (permalink)
Looks pretty good with the additions, however that support bracket seems out of place. I do like that is masks the PCIe power cables but I dunno, it just doesn't fit in my opinion. Maybe if it had some vertical venting in it or something to break up the big wall of metal or plastic. 

Intel i7 11700K ..................................Ryzen 9 5900X H2O
PNY XLR8 RTX 3090 ............................Sapphire RX 6900 XT Toxic 
Viotek SUW49C 32:9 Ultra Wide............Oculus Rift S
MSI MPG Z590 Gaming Edge WiFi..........ASUS TUF Gaming X570 WiFi
32GB TForce Xtreem 3600Mhz..............32GB Dominator Platinum 3600Mhz
EVGA G3 SuperNova 1000w..................EVGA G3 SuperNova 850w
#67
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/19 17:54:41 (permalink)
CraptacularOne
Looks pretty good with the additions, however that support bracket seems out of place. I do like that is masks the PCIe power cables but I dunno, it just doesn't fit in my opinion. Maybe if it had some vertical venting in it or something to break up the big wall of metal or plastic. 


Yeah I agree it does look out of place, the Lian Li one sadly was reading people are having issues with making it fit on the 3080 FTW3 Ultra's on Reddit, If I had more of the right tools instead of having to manually do it I would add in some vertical vent holes myself most I can do is drill holes in it then take a router or just drill holes with the tools I have that are mostly for my stuff is at the bottom of the lake work. The other brackets I saw was not really fan of, they looked cheap or they looked like you just added a lamp pole in your pc. It was that or buy the Lian Li GPU relocation kit, but then I would lose two SATA SSD easy mounting slots in the front instead of one.

 It also looks out of place because there is an extension bracket that can go on it to make it even taller for larger cases. Believe its part of its design. The whole it hides the PCIE cables was another reason I got it, but thinking on it, it will not be hiding 3x PCIE cables in my eventual stepup. So will have to see when I get to that point.  Yeah that part of the bracket is all metal, the extension bracket to make it for higher set GPU's in larger cases is plastic. I could try to cut a window in it and carefully route it out and put a piece of plexi glass or real glass put into it. But would need to be extra careful and slow.
post edited by donta1979 - 2021/03/19 22:06:55

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#68
transdogmifier
CLASSIFIED ULTRA Member
  • Total Posts : 5423
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Orlando, Fl
  • Status: online
  • Ribbons : 14
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/20 08:04:27 (permalink)
Hey, Donta, that is looking sweet! Good job!
 
I have a few friends that went Cyberpower PC as well, and they like the builds other than many of the things you stated.
 
Keep it up! You'll get there!
 
I might buy one to snag the 3080 out of and sell the rest to a friend who wants a 5950x build.
 
We'll see...
 
 
 

AMD Ryzen 5950x
Coolermaster ML360R RGB
Asus ROG Crosshair VIII Dark Hero
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
Asus ROG Swift PG43UQ 4k Monitor
eVGA 1600W Supernova T2 PSU
32GB Corsair Vengeance Pro 4000MHz (4x8GB)
Corsair MP600 Pro 2TB (Boot)
Corsair MP600 2TB (Games/Data)
Phanteks P500A Case
 
My Affiliate Code: 8ST3SZQYI7
My Associate Code: J4T7H4SOBIGFO8F
#69
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/20 13:42:13 (permalink)
I know the ram cooler is useless in this day and age unless your ocing the ram, but it does look cool.
 



post edited by donta1979 - 2021/03/20 13:45:26

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#70
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/20 13:43:27 (permalink)
transdogmifier
Hey, Donta, that is looking sweet! Good job!
 
I have a few friends that went Cyberpower PC as well, and they like the builds other than many of the things you stated.
 
Keep it up! You'll get there!
 
I might buy one to snag the 3080 out of and sell the rest to a friend who wants a 5950x build.
 
We'll see...
 
 
 


Honestly its a small price to pay to get a 30 series card, the small things are all things you can do yourself and you really didn't pay the premium to have some other company do it.

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#71
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/21 09:24:55 (permalink)
Just made these.

post edited by donta1979 - 2021/03/21 10:38:20

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#72
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/21 10:50:32 (permalink)
CraptacularOne
Looks pretty good with the additions, however that support bracket seems out of place. I do like that is masks the PCIe power cables but I dunno, it just doesn't fit in my opinion. Maybe if it had some vertical venting in it or something to break up the big wall of metal or plastic. 


Well between you and someone else and they just pointed out there is a RGB one.... So I guess the one I have now can go into the other machine I'm fixing up and upgrading.

So i guess something else incoming...


 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#73
atfrico
Omnipotent Enthusiast
  • Total Posts : 12441
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/21 17:47:18 (permalink)
Any temps drops on the CPU/Block? That memory cooler can help dissipate heat from that area.

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#74
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/22 11:47:49 (permalink)
atfrico
Any temps drops on the CPU/Block? That memory cooler can help dissipate heat from that area.


Its pure cosmetic at this point, DDR4 runs pretty cool now as it is, then the top CPU's run so hot two little fans are not going to make a scratch at lowering these CPU’s temps.
post edited by donta1979 - 2021/03/23 09:36:35

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#75
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/23 21:00:04 (permalink)



 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#76
aka_STEVE_b
EGC Admin
  • Total Posts : 16973
  • Reward points : 0
  • Joined: 2006/02/26 06:45:46
  • Location: OH
  • Status: online
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/24 07:57:54 (permalink)
Looking great . 

AMD RYZEN 9 5900X  12-core cpu~ ASUS ROG Crosshair VIII Dark Hero ~ EVGA RTX 3080 Ti FTW3~ G.SKILL Trident Z NEO 32GB DDR4-3600 ~ Phanteks Eclipse P400s red case ~ EVGA SuperNOVA 1000 G+ PSU ~ Intel 660p M.2 drive~ Crucial MX300 275 GB SSD ~WD 2TB SSD ~CORSAIR H115i RGB Pro XT 280mm cooler ~ CORSAIR Dark Core RGB Pro mouse ~ CORSAIR K68 Mech keyboard ~ HGST 4TB Hd.~ AOC AGON 32" monitor 1440p @ 144Hz ~ Win 10 x64 .....Associate Code: E54ARBK1Q0ZQ84O .........
................ GET UP TO A 10% DISCOUNT ON PURCHASES BY CLICKING ............


#77
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/28 00:04:16 (permalink)
Quick photo slowly getting more done... no logo was not purchased, we did it all here at home.




post edited by donta1979 - 2021/03/28 00:45:57

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#78
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/03/29 23:26:27 (permalink)
Well dimensions for Vinyl done and about to do a picture in transparent overlay light or dark smoke vinyl to go on the side panel as well. Just have to decide. It’s super simplified enough it won’t drive my wife or I insane.

Attached Image(s)


 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#79
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/02 09:51:19 (permalink)
Well putting this on today. New Glass panel will be here Monday, hopefully have the rest printed out and can finish then. May buy more fans and some 120mm magnetic dust filters for the bottom of the case. Or get one good fan for the gpu and get one more of the zalman will have to wait and see.



 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#80
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/02 19:37:50 (permalink)




 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#81
Dukman
FTW Member
  • Total Posts : 1413
  • Reward points : 0
  • Joined: 2009/08/15 09:47:59
  • Location: They keep telling me Zion
  • Status: offline
  • Ribbons : 4
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/03 08:56:03 (permalink)
donta1979
Well putting this on today. New Glass panel will be here Monday, hopefully have the rest printed out and can finish then. May buy more fans and some 120mm magnetic dust filters for the bottom of the case. Or get one good fan for the gpu and get one more of the zalman will have to wait and see.


New glass panel?   You didn't have one of my experiences did you?

And looking good.  Really like the all red pic.
 

Heatware



 
 
#82
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/03 09:57:55 (permalink)
Dukman

New glass panel?   You didn't have one of my experiences did you?

And looking good.  Really like the all red pic.
 


I was cleaning the plastic film residue, to finger prints off the front panel glass and some how it popped out and shattered on the floor. Replacement will be here on Monday. I won’t be cleaning any of the panels with them on for now on only on the table sitting flat on a micro fiber towel . Smh.
post edited by donta1979 - 2021/04/03 10:00:31

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#83
atfrico
Omnipotent Enthusiast
  • Total Posts : 12441
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/03 23:08:55 (permalink)
donta1979
Dukman

New glass panel?   You didn't have one of my experiences did you?

And looking good.  Really like the all red pic.
 


I was cleaning the plastic film residue, to finger prints off the front panel glass and some how it popped out and shattered on the floor. Replacement will be here on Monday. I won’t be cleaning any of the panels with them on for now on only on the table sitting flat on a micro fiber towel . Smh.

It was a sign your rig telling you it doesn't like the vynil🤣🤣😼

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#84
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/04 13:23:34 (permalink)
atfrico
donta1979
Dukman

New glass panel?   You didn't have one of my experiences did you?

And looking good.  Really like the all red pic.
 


I was cleaning the plastic film residue, to finger prints off the front panel glass and some how it popped out and shattered on the floor. Replacement will be here on Monday. I won’t be cleaning any of the panels with them on for now on only on the table sitting flat on a micro fiber towel . Smh.

It was a sign your rig telling you it doesn't like the vynil🤣🤣😼

Go be a hippy smothered in Haterraid someplace else! It happened way before the Vinyl.

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#85
atfrico
Omnipotent Enthusiast
  • Total Posts : 12441
  • Reward points : 0
  • Joined: 2008/05/20 16:16:06
  • Location: <--Dip, Dip, Potato Chip!-->
  • Status: offline
  • Ribbons : 25
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/04 19:26:20 (permalink)
donta1979
atfrico
donta1979
Dukman

New glass panel?   You didn't have one of my experiences did you?

And looking good.  Really like the all red pic.



I was cleaning the plastic film residue, to finger prints off the front panel glass and some how it popped out and shattered on the floor. Replacement will be here on Monday. I won’t be cleaning any of the panels with them on for now on only on the table sitting flat on a micro fiber towel . Smh.

It was a sign your rig telling you it doesn't like the vynil🤣🤣😼

Go be a hippy smothered in Haterraid someplace else! It happened way before the Vinyl.


. Before i do can you help you choose or troubleshoot the right flavor
 

 

 

Those who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way.
 
 
Affiliate Code: 3T15O1S07G
#86
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/05 23:10:35 (permalink)
atfrico
 
. Before i do can you help you choose or troubleshoot the right flavor
 

 

 


I like grape, blue and fruit punch honestly.

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#87
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/08 21:05:41 (permalink)


 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#88
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/09 20:41:28 (permalink)
More Vinyl to cut, one more text logo to make, 6x fan logos to make. More fans, maybe a custom GPU ARGB Bracket to be made. Statue would not fit without a small table/stand bike won’t clear gpu.

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#89
donta1979
Omnipotent Enthusiast
  • Total Posts : 14912
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 64
Re: The Scalper-Miner Bot Killer Build/Built to Order CPPC 2021/04/11 14:24:05 (permalink)
Messed up one Vinyl so have to print/cut it again, 3 more fans on the way, a Figure that hopefully fits inside. And a custom ARGB GPU Support Bracket being made. I need to look or find out what solid long RGB LED strip they used on the front panel and see if there is some way I can rig one for the side panel of the case. Also will be doing some custom Yellow wire line art for the case in vinyl to put on.
 








post edited by donta1979 - 2021/04/11 15:27:18

 
Heatware   My Old School Drivers Updating/Installing Guide 
My Affiliate Code: 1YXDGWSWU7 
Associate Code: ZHHBRVZYGOXUIIZ

Retired from the AAA Industry at 40 Living the Dream or at least trying to. Haha
USAF, USANG, US ARMY Combat Veteran

#90
Page: < 12345.. > >> Showing page 3 of 6
Jump to:
  • Back to Mobile