EVGA

***Show us your 3000 Series GPU***

Page: << < ..2627282930 > Showing page 26 of 30
Author
rjbarker
CLASSIFIED Member
  • Total Posts : 2361
  • Reward points : 0
  • Joined: 2008/03/20 10:07:05
  • Location: Vancouver Isle - Westcoast Canada
  • Status: offline
  • Ribbons : 21
Re: ***Show us your 3000 Series GPU*** 2022/02/03 19:18:41 (permalink)
03whitegsr
rjbarker
Nicely done...its not always about unicorns sh$#^ting candyfloss under a rainbow ......how about performance ...as your PR score indicates ...!

Thanks
Kind of tempted to try the Galax bios as it won't go over about 420W right now and it's REAL cold outside.
Some nice TS scores you have too.




Yeah the TS scores are pretty inflated due to the 12900K and DDR5....especially if OC'd to 5.2.w Memory at 6000....really smokes thru the CPU test vs my 9900K ;)

I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3  EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i /  Corsair 900D & XSPC 480 * 360 * 240 Rads   XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
 
staypuft
CLASSIFIED Member
  • Total Posts : 3764
  • Reward points : 0
  • Joined: 2006/03/11 14:04:03
  • Location: USA
  • Status: offline
  • Ribbons : 31
Re: ***Show us your 3000 Series GPU*** 2022/02/03 19:29:10 (permalink)
rjbarker
staypuft
Alenze
I hate RGB



I like your choices.  Gave mine just a touch of color.
 

 





Those are the quite the CPU Coolers.....are they effective...dont know anything about them.....I lke the subtle lighting ;)


Thanks!  I was going for an ominous look.
 
This cooler is a be quiet! Dark Rock Pro 4 rated to ~250W.  It is very quiet, but has its hands full with the 10700K.  I tested it with a friend's 10900K and it got pretty hot.  Doable with some creative power limits set in BIOS (but that sort of defeats the purpose). 

Interested in a discount on EVGA products?
Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN
 
2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200
EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
03whitegsr
Superclocked Member
  • Total Posts : 160
  • Reward points : 0
  • Joined: 2021/01/10 20:11:36
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2022/02/04 06:10:50 (permalink)
rjbarker
Yeah the TS scores are pretty inflated due to the 12900K and DDR5....especially if OC'd to 5.2.w Memory at 6000....really smokes thru the CPU test vs my 9900K ;)

Those 12th gens got me wishing I hadn't just bought a new AM4 motherboard. Although, the price on that DDR5 and Z690, yikes.
fugly16
Superclocked Member
  • Total Posts : 235
  • Reward points : 0
  • Joined: 2014/02/16 22:09:53
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/04 06:19:59 (permalink)
staypuft
rjbarker
staypuft
Alenze
I hate RGB



I like your choices.  Gave mine just a touch of color.
 

 





Those are the quite the CPU Coolers.....are they effective...dont know anything about them.....I lke the subtle lighting ;)


Thanks!  I was going for an ominous look.
 
This cooler is a be quiet! Dark Rock Pro 4 rated to ~250W.  It is very quiet, but has its hands full with the 10700K.  I tested it with a friend's 10900K and it got pretty hot.  Doable with some creative power limits set in BIOS (but that sort of defeats the purpose). 




I was using a Dark Rock Pro 4 for a little with my 5800x but went back to a 240mm AIO.  I liked it but I found that the AIO did have better temps ultimately.

3080 FTW3 Ultra Hybrid 
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2022/02/07 18:49:34 (permalink)
Endworld
Posted awhile back, but did a few updates since then. Finally was able to source a slim 92mm RGB fan, and made a new decal based on the schematic for the Hybrid shroud. 

 
https://i.imgur.com/H9TQKMV.jpg
 



AtozGlue

I like this. What fan is it?



Endworld
Thanks!! It's a Scythe Kaze Flex Slim 92mm RGB fan. I had attempted finding a slim 92mm RGB fan beforehand, but nobody made them until the holiday season when this one released.


 
Very cool.  Thanks for sharing!

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
rjbarker
CLASSIFIED Member
  • Total Posts : 2361
  • Reward points : 0
  • Joined: 2008/03/20 10:07:05
  • Location: Vancouver Isle - Westcoast Canada
  • Status: offline
  • Ribbons : 21
Re: ***Show us your 3000 Series GPU*** 2022/02/07 19:56:32 (permalink)
Just pre-ordered new Vector 2 to replace Vector.....really it will be about the aesthetics...to match the Velocity 2 ;)
Didn't bother with Active Backplate as 3080ti no VRAM on backside of PCB...already comes with a black backplate, end of March maybe.
 
https://www.ekwb.com/shop/ek-quantum-vector2-ftw3-rtx-3080-90-abp-set-d-rgb-nickel-acetal
 
 

I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3  EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i /  Corsair 900D & XSPC 480 * 360 * 240 Rads   XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
 
cpt00
New Member
  • Total Posts : 75
  • Reward points : 0
  • Joined: 2021/12/01 07:13:25
  • Status: offline
  • Ribbons : 2
Re: ***Show us your 3000 Series GPU*** 2022/02/08 05:50:11 (permalink)
free up some space on my desk, since working from home.
12600k, z690, 32gb 3800, 970 evo plus, 3060ti, LGA775 (2008 ish) cooler fit on LGA1700
 

staypuft
CLASSIFIED Member
  • Total Posts : 3764
  • Reward points : 0
  • Joined: 2006/03/11 14:04:03
  • Location: USA
  • Status: offline
  • Ribbons : 31
Re: ***Show us your 3000 Series GPU*** 2022/02/08 08:00:34 (permalink)
cpt00
free up some space on my desk, since working from home.
12600k, z690, 32gb 3800, 970 evo plus, 3060ti, LGA775 (2008 ish) cooler fit on LGA1700
 



Very cool.

Interested in a discount on EVGA products?
Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN
 
2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200
EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2022/02/16 02:06:55 (permalink)
staypuft
cpt00
free up some space on my desk, since working from home.
12600k, z690, 32gb 3800, 970 evo plus, 3060ti, LGA775 (2008 ish) cooler fit on LGA1700
 



Very cool.




Very cool indeed.  

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Emparus
Superclocked Member
  • Total Posts : 217
  • Reward points : 0
  • Joined: 2020/11/02 09:04:19
  • Status: offline
  • Ribbons : 2
Re: ***Show us your 3000 Series GPU*** 2022/02/16 04:56:37 (permalink)

EVGA 3090 FTW3 Ultra wrapped in Ekwb water blocks.
gsrcrxsi
SSC Member
  • Total Posts : 995
  • Reward points : 0
  • Joined: 2010/01/24 19:20:59
  • Status: offline
  • Ribbons : 5
Re: ***Show us your 3000 Series GPU*** 2022/02/16 06:31:01 (permalink)
O11D build with 3080Ti XC3 HC and EPYC 7443P


5x 3070Ti build for BOINC crunching (EPYC 7402P platform below):

Rig1: EPYC 7V12 | [7] Titan V
Rig2: EPYC 7B12 | [8] Titan V
Rig3: [2] EPYC 7742 | [8] Tesla V100 SXM2

Jenzobs
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2018/12/19 10:27:06
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/18 04:36:30 (permalink)
3070ti ftw in corep1 mini itx build paired with a 8700k and 32gb Trident Z RGB 2*16gb DDR4 cl14 on an Asus z390-i mobo.
Some custom Corsair sleeving for PSU cables and Deepcool AIO cooler.
Hope you'll fancy it.
 

harley262
iCX Member
  • Total Posts : 390
  • Reward points : 0
  • Joined: 2021/11/16 07:59:41
  • Location: numba won in youre hart
  • Status: offline
  • Ribbons : 3
Re: ***Show us your 3000 Series GPU*** 2022/02/18 05:25:29 (permalink)
Jenzobs
3070ti ftw in corep1 mini itx build paired with a 8700k and 32gb Trident Z RGB 2*16gb DDR4 cl14 on an Asus z390-i mobo.
Some custom Corsair sleeving for PSU cables and Deepcool AIO cooler.
Hope you'll fancy it.
 


looks great, the led around the edge is fancy.
kswildman
Superclocked Member
  • Total Posts : 178
  • Reward points : 0
  • Joined: 2020/08/12 12:19:26
  • Status: offline
  • Ribbons : 2
Re: ***Show us your 3000 Series GPU*** 2022/02/18 08:09:34 (permalink)
Emparus

EVGA 3090 FTW3 Ultra wrapped in Ekwb water blocks.


I really like this, nice work!

AMD Ryzen 7 5800X3d
ASUS Strix X570-E Gaming
32GB G.SKILL Trident Z Neo CL16 3600
Corsair iCUE H170i Elite Capellix 420mm AIO
SAMSUNG 980 PRO SSD 2TB - PCIe 4.0 NVMe SSD
Corsair RM1200x Shift
ASUS TUF RTX 4090
Lian Li Lancool Mesh III RGB
NuclearPancakes7283
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2022/02/17 13:42:12
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/18 09:22:29 (permalink)
Man you guys have some awesome rigs🤘🤘💯 Absolutely amazing great work guys!
skyline090
Superclocked Member
  • Total Posts : 155
  • Reward points : 0
  • Joined: 2018/03/17 16:02:59
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2022/02/18 13:18:57 (permalink)
kswildman

EVGA 3090 FTW3 Ultra wrapped in Ekwb water blocks.


Love the open air chassis. Where did you find a design like that?



Custom loop w/EK blocks - 12900k, 4090 FE, z690 Apex, G.Skill DDR5 6600 c32, EVGA 1000 P6, Lian Li O11D XL


 
kpdunphy
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2021/05/18 16:38:58
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/21 19:26:49 (permalink)
Il show you my set up.
 

 

Ciddharthas
iCX Member
  • Total Posts : 465
  • Reward points : 0
  • Joined: 2020/09/17 07:58:09
  • Location: Boulder, CO, USA
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2022/02/22 05:11:04 (permalink)
WARNING!!
RGB NOT FOR THE FAINT OF HEART!!
 


CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler
MB: MSI Z490 Meg Ace
RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz
GPU: 3080 Ti FTW3 Ultra Hybrid
Power Supply: Corsair HX1000i (1000 Watts)
Primary Monitor: LG CX48 (4k OLED)
Keyboard: Corsair K95 Platinum RGB
Mouse: Corsair Scimitar Elite RGB
Headset: Arctis Pro Wireless
Mic: Elgato Wave 3
VR: Occulus Quest 2
Jenzobs
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2018/12/19 10:27:06
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/22 09:07:01 (permalink)
kpdunphy
Il show you my set up.
 



lovely gaming bedroom, nice desk layout, clean and well organized. PC build is rather sharp(*).
Worth every penny.
 
(*)  i noticed ur AIO is set wrong; you should rotate it 180° up. The rad's reservoir should be higher in place than your pump, avoiding air bubbles to accumulate in the pump block, therefore extending ur AIO shelllife and preventing noise.
 
jnzbs
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2022/02/22 18:16:24 (permalink)
kpdunphy
Il show you my set up.
 

 





Beautiful setup you got going there.  

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
kpdunphy
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2021/05/18 16:38:58
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/02/22 19:37:28 (permalink)
Jenzobs
kpdunphy
Il show you my set up.
 



lovely gaming bedroom, nice desk layout, clean and well organized. PC build is rather sharp(*).
Worth every penny.
 
(*)  i noticed ur AIO is set wrong; you should rotate it 180° up. The rad's reservoir should be higher in place than your pump, avoiding air bubbles to accumulate in the pump block, therefore extending ur AIO shelllife and preventing noise.
 
jnzbs




Thanks for the advice brother I appreciate the lookout but there's nothing wrong with the way my AIO is set up. The reality is both directions are fine. If I rotate with the tubes up, they have to be above the cpu pump. However, tubes at the bottom is most efficient if you cant sit the cooler above. Tubes bottom or the radiator above the CPU, the air bubbles never reach the pump and just sit a top the radiator.  I switched my orientation cause my cooler sounded like an aquarium. It no longer does. Here is the explanation: (Got to 16:01 for the recap if video is too long)
https://www.youtube.com/w...b_channel=JayzTwoCents
post edited by kpdunphy - 2022/02/22 20:49:50
Ciddharthas
iCX Member
  • Total Posts : 465
  • Reward points : 0
  • Joined: 2020/09/17 07:58:09
  • Location: Boulder, CO, USA
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2022/02/22 20:33:33 (permalink)
kpdunphy
Jenzobs
kpdunphy
Il show you my set up.
 



lovely gaming bedroom, nice desk layout, clean and well organized. PC build is rather sharp(*).
Worth every penny.
 
(*)  i noticed ur AIO is set wrong; you should rotate it 180° up. The rad's reservoir should be higher in place than your pump, avoiding air bubbles to accumulate in the pump block, therefore extending ur AIO shelllife and preventing noise.
 
jnzbs




Thanks for the advice brother I appreciate the lookout but there's nothing wrong with the way my AIO is set up. The reality is both directions are fine. If I rotate with the tubes up, they have to be above the cpu pump. However, tubes at the bottom is most efficient if you cant sit the cooler above as at the bottom the air never reach them pump and just sit a top the radiator.  I switched my orientation cause my cooler sounded like an aquarium. It no longer does. Here is the explanation: (Got to 16:01 for the recap if video is too long)
https://www.youtube.com/w...b_channel=JayzTwoCents




Yeah as long as the pump isn't at the highest point of the loop, air bubbles won't get stuck there.  And tubes down (as you have them) is ideal for noise reasons, but having the tubes on the top won't cause any problems other than a bit of noise, which you might or might not even hear (as long as the pump isn't above the rest of the loop).

CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler
MB: MSI Z490 Meg Ace
RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz
GPU: 3080 Ti FTW3 Ultra Hybrid
Power Supply: Corsair HX1000i (1000 Watts)
Primary Monitor: LG CX48 (4k OLED)
Keyboard: Corsair K95 Platinum RGB
Mouse: Corsair Scimitar Elite RGB
Headset: Arctis Pro Wireless
Mic: Elgato Wave 3
VR: Occulus Quest 2
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2022/02/28 01:15:05 (permalink)
Ciddharthas
kpdunphy
Jenzobs
kpdunphy
Il show you my set up.
 



lovely gaming bedroom, nice desk layout, clean and well organized. PC build is rather sharp(*).
Worth every penny.
 
(*)  i noticed ur AIO is set wrong; you should rotate it 180° up. The rad's reservoir should be higher in place than your pump, avoiding air bubbles to accumulate in the pump block, therefore extending ur AIO shelllife and preventing noise.
 
jnzbs




Thanks for the advice brother I appreciate the lookout but there's nothing wrong with the way my AIO is set up. The reality is both directions are fine. If I rotate with the tubes up, they have to be above the cpu pump. However, tubes at the bottom is most efficient if you cant sit the cooler above as at the bottom the air never reach them pump and just sit a top the radiator.  I switched my orientation cause my cooler sounded like an aquarium. It no longer does. Here is the explanation: (Got to 16:01 for the recap if video is too long)
https://www.youtube.com/w...b_channel=JayzTwoCents




Yeah as long as the pump isn't at the highest point of the loop, air bubbles won't get stuck there.  And tubes down (as you have them) is ideal for noise reasons, but having the tubes on the top won't cause any problems other than a bit of noise, which you might or might not even hear (as long as the pump isn't above the rest of the loop).




KP has the correct orientation and the reason why his AIO CPU pump sounded like a aquarium was because of the air bubbles.  Manufacturers never top off the AIOs to leave room for expansion. You need all the air from the AIOs to be trapped at the top of the rad where they belong otherwise they'll be circulating into the loop and or getting trapped into the pump.
 
If the tubing starts from the top of a vertical rad like most have for many years is where the issues arise.  You want the tubing under the pump when you're placing a radiator vertically in the front.  If a AIO rad is placed at the top of the case, the air pockets will eventually make their way to the top therefore nothing is needed to be done there.  
 
With KP's case, he can tilt the case back while the AIO is turned on @ 100% to make sure the bubbles make their way to the top of the front rad if the need arises.  

Great explanation can be seen here:



 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
zippytek
FTW Member
  • Total Posts : 1185
  • Reward points : 0
  • Joined: 2020/10/06 17:25:35
  • Status: offline
  • Ribbons : 9
Re: ***Show us your 3000 Series GPU*** 2022/02/28 11:22:42 (permalink)


This weekend's bench config:
Z690 DARK K|NGP|N
12900K w/ TREX LN2 pot
2x 3090 KPE HC cooled with HC-500A
redteamgo
SSC Member
  • Total Posts : 802
  • Reward points : 0
  • Joined: 2013/11/16 13:20:08
  • Status: offline
  • Ribbons : 3
Re: ***Show us your 3000 Series GPU*** 2022/02/28 13:40:42 (permalink)
Zippy, GPU die 9C lol.  testing looks like its going well!

CPU:     Intel 12900K EK 1700 Quantum Mag Acetel
GPU:     EVGA 3090 KPHC
MB:      EVGA Z690 Dark
PSU:     EVGA SuperNOVA 1600 P+
Memory:  G.SKILL Z5 6600mhz XMP3
NVME:    Samsung 980 Pro Gen 4 1TB, Gen 3 970 1TB
Cooling: MO-RA3 420 P/P 8x200mm Noctua HS PWM, Dual D5
Case:    Fractal Design Define 7
 
MOD Rigs!!!
zippytek
FTW Member
  • Total Posts : 1185
  • Reward points : 0
  • Joined: 2020/10/06 17:25:35
  • Status: offline
  • Ribbons : 9
Re: ***Show us your 3000 Series GPU*** 2022/02/28 13:54:06 (permalink)
redteamgo
Zippy, GPU die 9C lol.  testing looks like its going well!


 
 it was a fairly successful weekend indeed. the one chiller is grossly insufficient for 2x kingpins. will plan to do some single gpu testing this week
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2022/03/03 13:58:48 (permalink)
zippytek


This weekend's bench config:
Z690 DARK K|NGP|N
12900K w/ TREX LN2 pot
2x 3090 KPE HC cooled with HC-500A




Those are some wicked temps, granted I'm sure you can go lower than that.  

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
Donradeon
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2021/10/09 09:05:13
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/03/03 20:16:23 (permalink)
cpt00
free up some space on my desk, since working from home.
12600k, z690, 32gb 3800, 970 evo plus, 3060ti, LGA775 (2008 ish) cooler fit on LGA1700
 



Really nice to see something unique that isn't just RGB diarrhea.


Donradeon
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2021/10/09 09:05:13
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/03/03 20:18:45 (permalink)
03whitegsr
Not pretty but she's mine


http://www.3dmark.com/pr/1409756


Clean and function over form always looks Best to me!


Donradeon
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2021/10/09 09:05:13
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2022/03/03 20:25:49 (permalink)
erayser
I bought my 3090 ftw3 in Nov 2020.  I can't believe it's been over year with this setup.   It kind of feels like it's brand new since there are those still waiting on a 30 series card.   I'm still waiting for a PS5 at msrp... but not paying scalper prices.  All my previous builds where custom watercooled for over a decade.    Decided to just use AIO coolers for this one.   Mainly using it for my Photography editing and content creation... so I'm not into the benchmark scene like used to.   I game and stream once in a while... but mostly editing and shopping on Amazon... LOL.   Not as cool as the custom loop rigs in this thread... but here is my over 1 year old rig and office setup:
 



 
 


That's your office? Do work for NASA or something??


Page: << < ..2627282930 > Showing page 26 of 30
Jump to:
  • Back to Mobile