EVGA

RTX 3090 xc3 110c memory HOT! Need higher end PADS or free extended warranty on EVGA part

Page: < 12 Showing page 2 of 2
Author
talon951
FTW Member
  • Total Posts : 1026
  • Reward points : 0
  • Joined: 2020/10/06 02:41:19
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 house fire memory 2021/03/18 08:52:22 (permalink)
cdc-951
talon951
That screenshot of GPUZ tells me he's mining. 106C with the core running at 1260mhz full load. Same as mine is running at right now except my ram temp is 80C.

Nope not mining. This was in shadow of the tomb raider. I used voltage curves to see if brining the power down can help memory.... Please do not assume and maybe ask?
 


Wow, sorry, only assuming because that's crazy low for GPU core power and temp to have the mem temp so high. There's something wrong with your card then. Is that the memory junction temp in your screenshot? I only ask because I know some EVGA cards have other mem sensors. Either the readings are wrong as HeinzNeu is suggesting, or a thermal pad is out of place (unless you already took it apart to check for that of course, haven't read the whole thread).
#31
transdogmifier
CLASSIFIED ULTRA Member
  • Total Posts : 5902
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Orlando, Fl
  • Status: offline
  • Ribbons : 18
Re: RTX 3090 house fire memory 2021/03/18 08:53:08 (permalink)
Even when I had the air cooler on my card it never reached anywhere near that temp....sounds like a reporting issue to me.
 

AMD Ryzen 7900x3d
Deepcool LT720
Gigabyte Aorus Elite AX X670 (Might change..don't like this board)
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
Asus ROG Swift PG43UQ 4k Monitor
eVGA 1600W Supernova T2 PSU
32GB Kingston 6000 DDR5 (2x16GB) Fury
Corsair MP600 Pro 2TB (Boot)
Corsair MP600 2TB (Games/Data)
Phanteks P500A Case
 
#32
ivangogh
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2021/03/04 18:39:56
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/18 10:29:45 (permalink)
Bozhemoy
I have a massive aluminum heatsink on the back of mine with some 80mm fans moving air over it and that keeps the temp at 92 degrees under heavy stress test benchmarking.  Without the heatsink I've easily seen memory junction hit 108 - 110 degrees. That being said, regular gaming without the heatsink I might hit the mid-80s, with the heatsink, it stays around 68 - 70 degrees.  If you have a spare wraith stealth cooler and some thermal pads, you can slap it on the back and it works just as well.




...happen to have a spare Wraith cooler...  I don't mind trying.
 
Where on the backside should it go?  On the GPU chip behind, where the exposed parts are or on the backplate itself?  
#33
pat182
New Member
  • Total Posts : 62
  • Reward points : 0
  • Joined: 2014/11/12 14:41:41
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/18 12:59:51 (permalink)
vertical mount it so airflow can touch the backplate
#34
Killboy_uk
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2007/08/15 08:26:45
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/18 15:27:02 (permalink)
I have  XC3 3090 as well before a that 1080ti from launch day 
 
I've only seen that clock and temp behaviour while mining when I had a Air cooler on it (I have a waterblock on it now)
 
Gaming clocks even with an adjusted curve was higher and ram temps lower.
 
I'll give you the benefit of the doubt, the fact you had 4!!! faulty 1080ti's I would think you are doing "something" to them and your 3090 to lead to such high gaming temps 

Asrock x470 Taichi Ultimate  - 3700x - RTX 3090 XC3 
#35
Killboy_uk
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2007/08/15 08:26:45
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/18 15:37:02 (permalink)
cdc-951
Like I said disaster launch 




Maybe start with not having a +500 ram clock 

Asrock x470 Taichi Ultimate  - 3700x - RTX 3090 XC3 
#36
gsrcrxsi
SSC Member
  • Total Posts : 995
  • Reward points : 0
  • Joined: 2010/01/24 19:20:59
  • Status: offline
  • Ribbons : 5
Re: RTX 3090 house fire memory 2021/03/18 16:37:38 (permalink)
the fact that the OP claims he's not mining when he very obviously is mining is the most hilarious part of this whole thread.
 
-500 core clock, +500 memory clock, fans at 100% constant GPU/mem load (not fluctuating like a game does).
 
"not mining, I'm gaming I swear!"
 
just admit it bro, no one cares. but EVGA won't give you a "free" extended warranty no matter how much you cry on the forums. don't be hyperbolic.

Rig1: EPYC 7V12 | [7] Titan V
Rig2: EPYC 7B12 | [8] Titan V
Rig3: [2] EPYC 7742 | [8] Tesla V100 SXM2

#37
Killboy_uk
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2007/08/15 08:26:45
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/18 16:53:50 (permalink)
Thanks for being insulting, I don't spend all my time on this forum I spend most of it on the OCUK forum. Yep I'm a level one tech, only been building PC's for 30 years, watercooling for 20, been around since the 286sx days, program for a living, used to work games animation tech yep I know nothing about any of this 
 
"Your" 6900xt has less ram , less ram chips which are not as close together and uses different ram (GDDR6 and not GDDR6X) so you are comparing chalk and cheese.
 
Since you like your annotated screenshots about about one showing GPU Z your game running and or task manager so we can see what you are running to get these temps.

*unecessary post removed, so subsequent quote was removed as well.
post edited by the_Scarlet_one - 2021/03/19 17:38:38

Asrock x470 Taichi Ultimate  - 3700x - RTX 3090 XC3 
#38
talon951
FTW Member
  • Total Posts : 1026
  • Reward points : 0
  • Joined: 2020/10/06 02:41:19
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 house fire memory 2021/03/18 17:16:29 (permalink)
gsrcrxsi
the fact that the OP claims he's not mining when he very obviously is mining is the most hilarious part of this whole thread.
 
-500 core clock, +500 memory clock, fans at 100% constant GPU/mem load (not fluctuating like a game does).
 
"not mining, I'm gaming I swear!"
 
just admit it bro, no one cares. but EVGA won't give you a "free" extended warranty no matter how much you cry on the forums. don't be hyperbolic.


Either mining or the card is defective. Even my crappy Zotac was better than that bone stock. Lol. Although my Zotac has gone from zero to hero in part thanks to EVGA . ;-)
#39
cdc-951
SSC Member
  • Total Posts : 520
  • Reward points : 0
  • Joined: 2012/04/27 02:26:30
  • Status: offline
  • Ribbons : 1
Re: RTX 3090 house fire memory 2021/03/19 06:44:03 (permalink)
I know what I am doing and if some of you read THROUGH THE FORUMS. People are having the same issue 
#40
Killboy_uk
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2007/08/15 08:26:45
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/19 07:02:47 (permalink)
cdc-951
I know what I am doing and if some of you read THROUGH THE FORUMS. People are having the same issue 


People are having the same issue when mining.

If you know what you are doing you won't mind showing us wrong by showing your gpu z and task manager at the same time. Its not that hard is it? I'll be the first to try and help.

Also knowing and seeing the rest of your system and cooling setup might help to better optimise your cooling etc

Asrock x470 Taichi Ultimate  - 3700x - RTX 3090 XC3 
#41
Killboy_uk
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2007/08/15 08:26:45
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/19 07:09:19 (permalink)
Also the ram on the back side alone is dumping put 25-30w of heat into that back plate so better thermal pads won't help as the back plate dosnt have the surface area

Asrock x470 Taichi Ultimate  - 3700x - RTX 3090 XC3 
#42
gsrcrxsi
SSC Member
  • Total Posts : 995
  • Reward points : 0
  • Joined: 2010/01/24 19:20:59
  • Status: offline
  • Ribbons : 5
Re: RTX 3090 house fire memory 2021/03/19 07:36:00 (permalink)
cdc-951
I know what I am doing and if some of you read THROUGH THE FORUMS. People are having the same issue 


better invest in that EK waterblock and backplate if you want MINING to last

Rig1: EPYC 7V12 | [7] Titan V
Rig2: EPYC 7B12 | [8] Titan V
Rig3: [2] EPYC 7742 | [8] Tesla V100 SXM2

#43
amistrata
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2015/12/12 04:41:48
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/19 07:47:02 (permalink)
This doesn’t quite have to with the other forum post. The op is taking about the memory junction temp in hwinfo. Which may not be accurate, or it might. I see similar temperatures while mining.
#44
Capt_Caveman
Superclocked Member
  • Total Posts : 132
  • Reward points : 0
  • Joined: 2005/12/09 14:41:35
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/19 09:29:33 (permalink)
cdc-951
Running 110C and peaked 112C. 


This launch is a disaster.... 


 
Need to RMA your card.  My 3090 FTW3 Ultra has never gone above 90c for memory temps.  I'm currently mining with it and my memory temps are in the high 60s.




AMD 5900X
EVGA 3080 FTW3
AsRock X570 Taichi / Noctua NH-U14S
G.Skill TridentZ Neo 32gb(16x2) 3600mhz CL16
Seagate Firecuda 520 2TB NVMe / Samsung 960 EVO 1TB NVMe
Corsair Crystal 570X Case
EVGA G3 850w
Soundblaster AE-5
Alienware AW3418DW and LG 27GP850-B
#45
bmgjet
iCX Member
  • Total Posts : 289
  • Reward points : 0
  • Joined: 2015/06/26 06:14:07
  • Status: offline
  • Ribbons : 9
Re: RTX 3090 house fire memory 2021/03/19 15:00:21 (permalink)
Rear ram pads and contact is terriable. This has already been known with EVGA 3090s since the first reviews and teardowns came out and the pads were found to but miss placed.



Heres mine, Was 101C with EVGAs placement job.
Replacing pads drop it to 90C.
Then replacing backplate with active cooling droped it to 70C.

Attached Image(s)

#46
DaHans
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2015/05/21 23:36:23
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/25 01:18:27 (permalink)
bmgjet
Rear ram pads and contact is terriable. This has already been known with EVGA 3090s since the first reviews and teardowns came out and the pads were found to but miss placed.
 
Heres mine, Was 101C with EVGAs placement job.
Replacing pads drop it to 90C.
Then replacing backplate with active cooling droped it to 70C.




What Thermalpad size and W/mK did you use?
#47
DaHans
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2015/05/21 23:36:23
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/03/25 05:11:15 (permalink)
cdc-951
DaHans
bmgjet
Rear ram pads and contact is terriable. This has already been known with EVGA 3090s since the first reviews and teardowns came out and the pads were found to but miss placed.
 
Heres mine, Was 101C with EVGAs placement job.
Replacing pads drop it to 90C.
Then replacing backplate with active cooling droped it to 70C.




What Thermalpad size and W/mK did you use?




Brain dead people assume I am mining... Smh This IS PURE EXAMPLE. I ran Shadow of the tomb raider max settings and letting the fans set to auto it still gets hot.... 4k 120 hz is not easy to run..... There is a flaw in these designs 


Well, it seems its better for your health to rma or sell the card.
 
I have a RTX 3090 and back in October I knew this card will be very hot. 
And before buying, there were already some threads with temperature issues. So everybody knows it.
 
 
I also game on 4k 120hz and I simply don't care about temperatures anymore. I got my memory temperature form 98°C to 88°C by changing the airflow in the Ncase M1. (With a 5950x in there)
  
 I got the 50$ 10-Year waranty (3 +7 years) and so what? If it dies I will get exchange in the next ten years. 
post edited by DaHans - 2021/03/25 05:21:52
#48
Vanquish1124
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2012/06/12 16:47:54
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/08/30 18:16:50 (permalink)
bmgjet
Rear ram pads and contact is terriable. This has already been known with EVGA 3090s since the first reviews and teardowns came out and the pads were found to but miss placed.



Heres mine, Was 101C with EVGAs placement job.
Replacing pads drop it to 90C.
Then replacing backplate with active cooling droped it to 70C.


Hi bmgjet,
Nice work on the thermal pad replacement. Do you mind sharing the thickness of the pads you used? Seems most people online have the 3090 FTW versions while I have the XC3 version and I'm not sure the pad thickness is the same between those two models.
Thanks
EDIT: Backplate thermal pads to be specific
post edited by Vanquish1124 - 2021/08/30 18:17:51

The act of war is the last option of a democracy.
- Joseph C. Wilson
 
#49
KlNGPlN
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2021/02/19 06:48:42
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 house fire memory 2021/08/31 06:27:10 (permalink)
bmgjet
Rear ram pads and contact is terriable. This has already been known with EVGA 3090s since the first reviews and teardowns came out and the pads were found to but miss placed.



Heres mine, Was 101C with EVGAs placement job.
Replacing pads drop it to 90C.
Then replacing backplate with active cooling droped it to 70C.


Can you show me how you got 70c while mining?


#50
kevinc313
CLASSIFIED ULTRA Member
  • Total Posts : 5004
  • Reward points : 0
  • Joined: 2019/02/28 09:27:55
  • Status: offline
  • Ribbons : 22
Re: RTX 3090 house fire memory 2021/08/31 07:17:53 (permalink)
gsrcrxsi
the fact that the OP claims he's not mining when he very obviously is mining is the most hilarious part of this whole thread.
 



Pretty impressed with the 3090 FTW3 vram temps on mine so far.  Better than a 3080 Hybrid.
#51
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile