Hello,
 
Recently I've been experiencing frequent BSODs with my 2080ti ftw3 installed. They range from DRIVER_IRQL_NOT_LESS_OR_EQUAL to KERNEL_SECURITY_CHECK_FAILURE. This usually happens while gaming or playing BF V using DX11. Sometimes it just happens while surfing the web though. The system will just stutter and then BSOD.
 
I've done the following troubleshooting:
 
-Uninstall Driver using DDU in Safe mode and reinstall latest 419.35
-Checked Drivers using Verifier using other suggestions in this thread - .  - This does not give me any dumps under watchdog but I do have a dump in C:\Windows\Minidump with today's date of latest crash.
-Updated Windows to latest and make sure all patches installed.
-Checked Disks using Dskchk and System File Checker
-Run Memory Tests and Windows Memory Diagnostics (no issues detected)
-Run AIDA64 System Stability test and MemTest each for 30 minutes without any BSODs while putting GPU/CPU under loads.
 
I am not sure what to do. Here's some of the error screens. I did have a Critical Kernal power error in Event Viewer at the same time as crash with KernalPower BSOD. I've included a text dump of that as well.
 
Kernal Power Event Viewer Critical Event - 
 

 

System Information
 
Ryzen 2700x 
16GB DDR4 3200
RTX 2080ti FTW3
EVGA G3 650W PSU
NZXT H500i Case
 
any help you guys can give would be appreciated

hal.dll hal.dll+1945 fffff806`43a1f000 fffff806`43ab6000 0x00097000 0xfbe06e6e 11/29/2103 10:25:50 AM Microsoft® Windows® Operating System Hardware Abstraction Layer DLL 10.0.17763.194 (WinBuild.160101.0800) Microsoft Corporation C:\WINDOWS\system32\hal.dll
 
ntoskrnl.exe ntoskrnl.exe+1c4d69 fffff806`43ab7000 fffff806`44526000 0x00a6f000 0xaad69962 10/28/2060 8:04:50 AM Microsoft® Windows® Operating System NT Kernel & System 10.0.17763.379 (WinBuild.160101.0800) Microsoft Corporation C:\WINDOWS\system32\ntoskrnl.exe
 
Those are the two red items under the Kernel crash this AM. The Bug Check code is 139. I have another from a week ago that is 03b. 
 
I started out with two individual 6+2s from the PSU. Then I switched to a single to dual 6+2 from PSU. Both have not alleviated instability. Currently I'm on a single to dual 6+2 and was at the time of 139 code.
 
Hopefully this info is helpful.

ok. I will switch back to the two and update.
 
Does it sound like it is a PSU issue? I was thinking that running a 650w with this card might be cutting it close. I was going to upgrade to maybe an 850w EVGA and see if that alleviated also.
 

I haven't done any OC of the Ryzen since I've had it. It's just set on it's default settings.
 
 

Email Sent. Thanks again. Just had another crash after switching to two separate cables. Included that dump as well.

bcavnaugh
Where did my Post GO?

I removed it because it was basically the equivalent to a blank post.