EVGA

Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, Kingpin)

Page: < 1234 > Showing page 2 of 4
Author
Post
Essentials Only Full Version
Dyezak
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2020/10/10 16:06:18
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/18 07:27:12 (permalink)
5950x on an Aorus x570 Master - EKWB Monoblock cooled
EVGA 3090 FTW3U on XOC BIOS - EKWB Blocked
64gb of 16/16/16/16 3200mhz RAM
1tb PCIE 4.0 Sabrent Rocket
3x 360mm rads
 
Daily settings are MSI Afterburner, +100mhz on the GPU and +1000 on VRAM
 
Generally my office hovers around 25C room temp.
 
https://www.3dmark.com/pr/932673
 
Port Royal 14,700
 
I haven't pushed port royal and really tried for a "top score" for my rig, might be fun to do one night after the Fam has hit the sack but I'm going to guess I'd be hovering between 14,900 or 15,000 with the current BIOS and nothing dropping water temps below room temp capabilities.  
 
I guess some pics of my setup and screen shots of GPUZ and HWInfo are in order....I may add those later today if I remember to :)
#31
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/18 09:29:12 (permalink)
CptT95
Sweeeeet
Btw, mind pm me what all you used/did to the card, want to get memory down to those levels when I get my KP, let's spend even more money on a $2300 GPU XD
Also what was that one guys heatsink from Amazon? Was the perfect size for the card



The main bulk of what I used is on Page 7 (if you're using a computer) of the VRAM cooling thread, as far as pads, heatsinks & such links goes.  The 12.8Wm/K 2mm pads are Thermalright ones from Amazon.  Used those on both sides VRAM now.  Pretty much all of the rest of the pads I did on the backplate side are the blue Ayunni 6Wm/K pads linked on that page of the thread.
 
The way I figure it, if I'd done it "right" the first time & just went straight to the high end pads where they're needed, cheaper ones on the rest, with heatsinks on thermal paste on the backplate, it would've probably cost less than $100 to get all that backplate cooling mods done, and the differences it's made in temps is worth it.
 
I am curious how someone with no backplate changes would compare to my setup, temperatures wise, in terms of the VRAM etc, with a HydroCopper card specifically.
 
It seems I've only gotten maybe 1/4 of the way through Metro Exodus or something like that.  Enjoying it so far, though the "cannibals" level was creepy... and the whole "zombies" style stuff is annoying, nosalies are bad enough, I don't need weird undead/nuclear zombies flyin' at me too! lol

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#32
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/18 10:01:51 (permalink)
I'll push the card as far as I can without mods when I get my card this week or next :)
#33
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/22 02:33:35 (permalink)
It's a Steam screenshot so quality is degraded a bit, but this level definitely started getting power draw way up there, it was in the 450+W range most of it once I actually got in to the level, the scene here is before you can actually "play", cinematic style:
 

 
And should be noted, that power draw is with my 2100MHz @ 1025mV undervolt/OC setting:
 

 
 

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#34
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/22 19:33:02 (permalink)
https://twitter.com/EVGA_JacobF/status/1396252419361677315?s=19
This is insane, 2800 on core clock
#35
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/22 23:48:13 (permalink)
Wonder if that's on LN2 or Liquid Helium or what.

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#36
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/24 14:50:38 (permalink)
CptT95
I'll push the card as far as I can without mods when I get my card this week or next :)

Today is the day it seems 😇😋😬
#37
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 10:00:39 (permalink)
Ordered a mp5works parallel backplate cooler instead of heatsinks and fan setup, should make things more streamlined and cooler, will see how good those stock pads really are once I get backplate cooler lol
#38
fragility_V1
SSC Member
  • Total Posts : 940
  • Reward points : 0
  • Joined: 2015/07/16 10:02:01
  • Location: Southern California
  • Status: offline
  • Ribbons : 4
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 11:08:54 (permalink)
CptT95
Ordered a mp5works parallel backplate cooler instead of heatsinks and fan setup, should make things more streamlined and cooler, will see how good those stock pads really are once I get backplate cooler lol

Did the same thing, appears to be working well keeping the backside mem similar to the front.  Word of cuation, none of the stock MP5clips mounting clips will work with the KPE backplate, it's just too thick and there's no gap between it and the PCB.  So unless you want to rubber band it around the card, it'll just lay on top (so no vertical).  Seems to be kept in place enough with the thermal pad and the self weight, but some additional compression would be nice.
#39
Dyezak
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2020/10/10 16:06:18
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 11:20:32 (permalink)
I'm looking for EK to finally release their active backplate over here.  
#40
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 11:49:44 (permalink)
fragility_V1
CptT95
Ordered a mp5works parallel backplate cooler instead of heatsinks and fan setup, should make things more streamlined and cooler, will see how good those stock pads really are once I get backplate cooler lol

Did the same thing, appears to be working well keeping the backside mem similar to the front.  Word of cuation, none of the stock MP5clips mounting clips will work with the KPE backplate, it's just too thick and there's no gap between it and the PCB.  So unless you want to rubber band it around the card, it'll just lay on top (so no vertical).  Seems to be kept in place enough with the thermal pad and the self weight, but some additional compression would be nice.

They sell bigger clips, though shipping is pricey 😆
For just clips it's like 3.60 euro plus 19.90 for shipping to Virginia USA
I got my order modified to add clips through CS, didn't know what clips were for when ordering, found out 5 minutes later lol
#41
fragility_V1
SSC Member
  • Total Posts : 940
  • Reward points : 0
  • Joined: 2015/07/16 10:02:01
  • Location: Southern California
  • Status: offline
  • Ribbons : 4
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 11:54:44 (permalink)
CptT95
fragility_V1
CptT95
Ordered a mp5works parallel backplate cooler instead of heatsinks and fan setup, should make things more streamlined and cooler, will see how good those stock pads really are once I get backplate cooler lol

Did the same thing, appears to be working well keeping the backside mem similar to the front.  Word of cuation, none of the stock MP5clips mounting clips will work with the KPE backplate, it's just too thick and there's no gap between it and the PCB.  So unless you want to rubber band it around the card, it'll just lay on top (so no vertical).  Seems to be kept in place enough with the thermal pad and the self weight, but some additional compression would be nice.

They sell bigger clips, though shipping is pricey 😆
For just clips it's like 3.60 euro plus 19.90 for shipping to Virginia USA
I got my order modified to add clips through CS, didn't know what clips were for when ordering, found out 5 minutes later lol

Yah, I bought those clips too.  Still not big enough for the backside.  You can kinda use them on the front, but they need to be bigger to fit the rear.
#42
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/25 15:46:00 (permalink)
fragility_V1
CptT95
fragility_V1
CptT95
Ordered a mp5works parallel backplate cooler instead of heatsinks and fan setup, should make things more streamlined and cooler, will see how good those stock pads really are once I get backplate cooler lol

Did the same thing, appears to be working well keeping the backside mem similar to the front.  Word of cuation, none of the stock MP5clips mounting clips will work with the KPE backplate, it's just too thick and there's no gap between it and the PCB.  So unless you want to rubber band it around the card, it'll just lay on top (so no vertical).  Seems to be kept in place enough with the thermal pad and the self weight, but some additional compression would be nice.

They sell bigger clips, though shipping is pricey 😆
For just clips it's like 3.60 euro plus 19.90 for shipping to Virginia USA
I got my order modified to add clips through CS, didn't know what clips were for when ordering, found out 5 minutes later lol

Yah, I bought those clips too.  Still not big enough for the backside.  You can kinda use them on the front, but they need to be bigger to fit the rear.

Always zip ties for those who prefer function over form 😆
#43
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/26 17:49:03 (permalink)
Some tips for this KP HC please, like switching bios, clocks at what voltages etc
#44
Robert0507
Superclocked Member
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2018/09/26 09:42:22
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/26 18:04:00 (permalink)
Same. Tips for bios and clocks/voltage
#45
ss.dna
New Member
  • Total Posts : 46
  • Reward points : 0
  • Joined: 2015/10/27 23:49:13
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/26 19:48:50 (permalink)
Clovis559
lobstar
5950x, 3090 FTW3U (KPE520w bios).  Both under Optimus blocks. Ambient was 20.6C
Port Royal: 
Time Spy (Gfx: 23191): 
It's the system in the blue EasyXL.





Love the [H]



Been there since 2000 and I'll never leave!
#46
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/28 17:30:16 (permalink)
I need to figure out something that's going to be effective on holding the backplate on the card where those two loose corners are and see if that effects anything... I doubt it, but who knows.

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#47
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/28 18:36:21 (permalink)
what you talking bout?
#48
Ericthegreat
Superclocked Member
  • Total Posts : 147
  • Reward points : 0
  • Joined: 2015/09/07 17:58:30
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/29 00:09:34 (permalink)
Is that a kp hc? I didn't know it had a kingpin led in the front, is it rgb?
#49
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/29 03:58:26 (permalink)
It has an rgb led on the water inlet outlet block, but other then that just the OLED screen lol
#50
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/29 08:21:04 (permalink)
CptT95
what you talking bout?





 
And yes, that tiny gap is a concern for me. lol

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#51
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/29 09:42:58 (permalink)
That gap would be perfect for the MP5 backplate block 😆
Edit- for the clips I mean lol might have been a little unclear there
post edited by CptT95 - 2021/05/29 11:41:08
#52
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/29 22:19:56 (permalink)
I think I'm just going to use thermal tape, since I don't plan on taking the backplate off of the card again anytime soon.

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#53
SoldierRBT
Superclocked Member
  • Total Posts : 109
  • Reward points : 0
  • Joined: 2011/01/06 12:12:06
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 11:41:01 (permalink)
What are you guys temperatures with the HC block? I used KPx thermal paste on the core and thermalright 12.8 w/mk 2mm thermal pads on the memory chips  (First time watercooling GPU). Temps are okay, maybe I was expecting too much. Core delta temps are 14C which isn't that amazing for a $300 block. Memory are running very cool. Mem hotspot went from high 70s to mid 50s. 
#54
Robert0507
Superclocked Member
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2018/09/26 09:42:22
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 13:01:42 (permalink)
Does the HC have a specific inlet and outlet or can they be hooked up in any order?
#55
emmett
SSC Member
  • Total Posts : 514
  • Reward points : 0
  • Joined: 2008/03/30 23:42:22
  • Status: offline
  • Ribbons : 2
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 15:12:48 (permalink)
Dabadger84
CptT95
what you talking bout?





 
And yes, that tiny gap is a concern for me. lol




Is the gap from adding a thermal pad for VRM's on backplate? Not squishy enough?

Currently using
Gigabyte Z370 Aorus Gaming 7
 
EVGA 2080 TI KingPin
Intel 9900K
GSkill 3200
EVGA G2 1300 
#56
Robert0507
Superclocked Member
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2018/09/26 09:42:22
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 15:30:47 (permalink)
Has anyone tried the MP5 backplate? Is it worth it? What is your average temp drop on vram
#57
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 16:04:32 (permalink)
I honestly have no idea if it helped much, I do know that aside from Mem junction hitting 70s-80s still, all mem sensors through ICX is reading 50s with backplate installed no clips putting pressure(KP backplate be super THICCCCC, it don't fit at all, even the extra large clips XD)
I think it does help overall a bit, but lack of pressure and the sheer size of the backplate, means unless you out higher performance pads under the backplate in place of stock, you wont get the kind of temp drops you are looking for
btw, if you figure out how to clip the block onto the KP let me know, I would like to not have to use zip ties lol
#58
CptT95
FTW Member
  • Total Posts : 1403
  • Reward points : 0
  • Joined: 2016/12/31 23:06:26
  • Status: offline
  • Ribbons : 0
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 16:08:54 (permalink)
emmett
Dabadger84
CptT95
what you talking bout?





 
And yes, that tiny gap is a concern for me. lol




Is the gap from adding a thermal pad for VRM's on backplate? Not squishy enough?


its like that by design, most likely from there being a thermal pad there period

post edited by CptT95 - 2021/05/30 16:11:56
#59
emmett
SSC Member
  • Total Posts : 514
  • Reward points : 0
  • Joined: 2008/03/30 23:42:22
  • Status: offline
  • Ribbons : 2
Re: Post yer HydroCopper/Blocked card setups & performance/temp numbers! (3080, 3090, King 2021/05/30 16:35:16 (permalink)
AH, just took a better look at mine, I also have it.

Currently using
Gigabyte Z370 Aorus Gaming 7
 
EVGA 2080 TI KingPin
Intel 9900K
GSkill 3200
EVGA G2 1300 
#60
Page: < 1234 > Showing page 2 of 4
Jump to:
  • Back to Mobile