dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Got a ? here. I know from reading, that turbo mode or EIST has to be enabled to bring the chips up to 4800MHZ. but the MESH is another
beast. see most get skylake x to 30 or31, but how can you take this setting to? But here is what puzzles me, is cpu z says 4800 but in task manager or system, it shows 3500 mhz.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Overclocking the Mesh and CPU
2019/08/09 09:22:24
(permalink)
MB ?
CPU ?
task Mgr shows stock speeds (as designed)
GPUz shows Measured speed (as running)
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/09 10:23:06
(permalink)
299 dark, with a 7800x no need for more right now. chip runs greqat at 4800mhz with avx of 3 offset and a 31 mesh with
corsair rgb 3200 pro. any more I can get from this? dual fan AIO idle 44c max in game 55 and cinamench 70c. and vcore is
1.265v
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21171
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: Overclocking the Mesh and CPU
2019/08/09 12:11:46
(permalink)
dmann304
any more I can get from this?
dmann304
no need for more right now.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Overclocking the Mesh and CPU
2019/08/09 12:15:46
(permalink)
ty_ger07
dmann304
any more I can get from this?
dmann304
no need for more right now.
No need for more cores, always a need for more speed.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/10 15:33:34
(permalink)
With this setup, how high can I probably go with the skylake x 7800? 4800 is so sweet and snappy, but
will 5ghz be suffice with a corsair aio 100v2?
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/11 14:06:06
(permalink)
my task manager shows 4.59GHz as my multi is 100x46 but to be honest what task manager says isnt really important to me. Actual clock is what i care about and thats what CPU-Z shows me.
I dont use turbo mode or any of the c states. I keep my multiplier ratio set at 46 all the time.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 12:28:03
(permalink)
When right clicking my computer, and selecting properties. you get an info screen of system type, name and specs.
I wanna know why it shows the stock speed of cpu. and you said you keep turbo off. on dark 299 I did that
in the setup, and even though it showed 48x the stock was 3500 on all spec . plus how high can you get the mesh?
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 13:20:13
(permalink)
dmann304
When right clicking my computer, and selecting properties. you get an info screen of system type, name and specs.
I wanna know why it shows the stock speed of cpu. and you said you keep turbo off. on dark 299 I did that
in the setup, and even though it showed 48x the stock was 3500 on all spec . plus how high can you get the mesh?
because it pulls that data from a metadata string on the CPU. Your wanting it to show actual clock in places that its not going to. My mesh is set at 32.
|
DEJ915
SSC Member
- Total Posts : 544
- Reward points : 0
- Joined: 2013/11/03 21:58:26
- Status: offline
- Ribbons : 11
Re: Overclocking the Mesh and CPU
2019/08/12 13:34:56
(permalink)
dmann304
When right clicking my computer, and selecting properties. you get an info screen of system type, name and specs.
I wanna know why it shows the stock speed of cpu. and you said you keep turbo off. on dark 299 I did that
in the setup, and even though it showed 48x the stock was 3500 on all spec . plus how high can you get the mesh?
If you turn turbo off it will not apply overclock and only run at stock speed 3.5GHz. Other poster may be referring to turbo 3.0 which is different and you can turn it off but they should have specified.
post edited by DEJ915 - 2019/08/12 13:40:28
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 14:04:49
(permalink)
what mesh vcore are you using to get 32?
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 16:13:12
(permalink)
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 17:22:50
(permalink)
I have it on 1.12, but I will go to 1.2v. does that vcore doing anything
to the core vcore on cpu? in workloads.
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/12 18:33:13
(permalink)
Mesh voltage? no its the voltage for Mesh. CPU Voltage is different.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/13 15:44:06
(permalink)
I know that, I was wondering if the mesh voltage effects cpu temps under load? and having this at 1.2 effect your system? BSOD's or
random weirdness?
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/13 16:55:32
(permalink)
i could only get to 31 on auto. To hit 32 i had to change to 1.2. I dont know how much it affected temps. I just did it per the OC Guide. Then set my multi based on temps and throttling.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/14 14:08:40
(permalink)
How is the performance with the 32 mesh? I used to use auto back in the day, went to 30, and now 31 and seems more snappy
when navigating.
|
dmann304
iCX Member
- Total Posts : 410
- Reward points : 0
- Joined: 2008/07/16 22:44:20
- Status: offline
- Ribbons : 0
Re: Overclocking the Mesh and CPU
2019/08/16 17:01:34
(permalink)
I decided to try the mesh at 32, and with 1.2v, and seems ok for awhil, but when I ran a 3dmark workload in ultra.
I got a bsod. but when I moved it back to 31 mesh, no bsod in workloads. is this cuz im running at 4800mhz? and mesh to
high?
|