EVGA

Hot!Overclock/Undervolt results.

Author
saadtariq30
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2017/12/11 19:04:39
  • Status: offline
  • Ribbons : 0
2018/03/11 07:54:30 (permalink)
Hey guys, 
 
Thought I'd start a thread so that we can share our results here and make it easier for anyone looking to overclock/undervolt/memory overclock. 
 
I'll start: Running at 3.6ghz all cores with -100mv. GPU at stock.  
 
Edit: This is on a 1070 g-sync model btw
post edited by saadtariq30 - 2018/03/11 07:55:31
#1

6 Replies Related Threads

    acefrozen1
    New Member
    • Total Posts : 25
    • Reward points : 0
    • Joined: 2016/03/08 10:26:08
    • Status: offline
    • Ribbons : 0
    Re: Overclock/Undervolt results. 2018/03/11 16:41:42 (permalink)
    Mine is unstable past -80mv and i keep it at -75mv, stock clocks (undervolting due to bad thermals). Memory is stable at all predefined settings from the bios including 3200 with stock timings. GPU at stock clocks due to thermals. Will add new results after i repaste and add new thermal pads. Hopefully that will fix the terrible thermals.
     
    UPDATE: re-pasted cpu and gpu and added new fujipoly extreme pads, now able to run stable at 3.6ghz all cores with a -70mv undervolt at slightly lower temps than before for daily use.
     
    1070 g-sync model.
    post edited by acefrozen1 - 2018/03/25 21:04:31

    DESKTOP: Intel Core i7 3770 @ 3.9ghz + Hyper 212 Plus | SLI Gigabyte Windforce GTX 970 Gaming | 750w EVGA Supernova B1 80+ Bronze | 16gb DDR3 Corsair Value Ram | Intel Extreme DZ77GA-70K | Rosewill Cullinan
     
    LAPTOP: EVGA SC17 1070 G-SYNC
     
    WORKSTATION: HP Z600 | 2x Intel Xeon x5660 @2.8ghz | Gigabyte Windforce GTX 960 Gaming 4gb | 24gb DDR3 ECC
    #2
    HaloTechnology
    Superclocked Member
    • Total Posts : 108
    • Reward points : 0
    • Joined: 2010/09/23 09:01:30
    • Status: offline
    • Ribbons : 1
    Re: Overclock/Undervolt results. 2018/03/11 20:12:58 (permalink)
    3.6 Ghz with -95mV

    EVGA SC17 - 1070 No/GSYNC
    If only the 4K display didn't ghost that much :'(
    #3
    Kulkiet
    New Member
    • Total Posts : 17
    • Reward points : 0
    • Joined: 2015/06/13 12:54:28
    • Status: offline
    • Ribbons : 0
    Re: Overclock/Undervolt results. 2018/03/12 13:46:54 (permalink)
    i do 2,7 with -135 ,helps to stay colder on wsad ,seems like oc cpu cause warming up on left side  
    1070 gsync whwnever i put it flat on table it heats up a lot
    thermals are ok under 70 C all the time when gaming but the case is wamrign to 50+ so kinda annoying 
     
    Do you have any sugestion for coolign pad or other solution to cool off case
    #4
    HaloTechnology
    Superclocked Member
    • Total Posts : 108
    • Reward points : 0
    • Joined: 2010/09/23 09:01:30
    • Status: offline
    • Ribbons : 1
    Re: Overclock/Undervolt results. 2018/03/12 21:04:21 (permalink)
    Kulkiet
    i do 2,7 with -135 ,helps to stay colder on wsad ,seems like oc cpu cause warming up on left side  
    1070 gsync whwnever i put it flat on table it heats up a lot
    thermals are ok under 70 C all the time when gaming but the case is wamrign to 50+ so kinda annoying 
     
    Do you have any sugestion for coolign pad or other solution to cool off case


    kinda of hard to cool the case since the whole case is acting as a heatsink but yuo can get some laptop cooler with fan it might help .

    Just FYI i have one it didnt help that much :/ Liquid metal seems the only way :)

    EVGA SC17 - 1070 No/GSYNC
    If only the 4K display didn't ghost that much :'(
    #5
    acefrozen1
    New Member
    • Total Posts : 25
    • Reward points : 0
    • Joined: 2016/03/08 10:26:08
    • Status: offline
    • Ribbons : 0
    Re: Overclock/Undervolt results. 2018/03/13 00:01:55 (permalink)
    HaloTechnology
    Liquid metal seems the only way :)



     
    That remains to be seen. I will be re-pasting with Thermal Grizzly Kryonaut (non LM non conductive ceramic based TIM) and replacing the thermal pads with Fujipoly Extreme XR-m pads as well. I will be sharing my results with pictures, just waiting for all of the materials to arrive.

    DESKTOP: Intel Core i7 3770 @ 3.9ghz + Hyper 212 Plus | SLI Gigabyte Windforce GTX 970 Gaming | 750w EVGA Supernova B1 80+ Bronze | 16gb DDR3 Corsair Value Ram | Intel Extreme DZ77GA-70K | Rosewill Cullinan
     
    LAPTOP: EVGA SC17 1070 G-SYNC
     
    WORKSTATION: HP Z600 | 2x Intel Xeon x5660 @2.8ghz | Gigabyte Windforce GTX 960 Gaming 4gb | 24gb DDR3 ECC
    #6
    vistarshook
    iCX Member
    • Total Posts : 292
    • Reward points : 0
    • Joined: 2017/11/05 21:45:21
    • Status: offline
    • Ribbons : 1
    Re: Overclock/Undervolt results. 2018/03/17 14:55:15 (permalink)
    There are no other 1080 users here yet, so I will post mine after a LM repaste.
    I changed the precision X presets in the unlocked Bios to the following.
    prime and ac origin stable
    Custom 42x4 +5mV (Daily Driver)
    Superclock 45x4 +135mV (Rendering)
    Normal 29x4 -125mV (Battery Profile, since it switches automatically to this preset on battery)
    Silent 35x4  -110mV (Stock 4 core clocks)

    EVGA SC17 4K G-SYNC | i7-7820HK | GTX 1080 | 32GB DDR4 3200MHz | Samsung 960 Pro 2TB + 2TB Micron 1100| Firestrike | CB15@4.9GHz
    Razer Blade 14 FHD | i7-6700HQ | GTX 1060 | 16GB DDR4 2400MHz | Samsung SM961 1TB | Firestrike

    #7
    Jump to:
  • Back to Mobile