Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/01 00:01:47
(permalink)
uboysss33
One last question: can I change the termal paste and pad After 2 years or i will invalid the warranty?
Yes, you can. As long as you don't damage the card in the process your warranty will stay valid.
|
uboysss33
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2019/10/31 04:52:10
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/01 13:15:35
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/01 13:26:48
(permalink)
|
uboysss33
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2019/10/31 04:52:10
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/02 00:10:52
(permalink)
The last question,i promise!!
The size of thermal pad is 1.5mm? Where i can buy It?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/02 14:30:45
(permalink)
uboysss33
The last question,i promise!!
The size of thermal pad is 1.5mm? Where i can buy It?
Not 100% on the size. I would recommend you call evga tech support to get the proper info. You should be able to buy pads at newegg.com
|
uboysss33
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2019/10/31 04:52:10
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/11/02 22:56:58
(permalink)
|
Anzomia
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2018/07/21 01:21:56
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/12/02 17:09:57
(permalink)
Recently upgraded to an SLI configuration (wish I could get my hands on an EVGA HB 60mm SLI Bridge though  ). Here are my 1080s!    
post edited by Anzomia - 2019/12/02 17:12:32
|
rostan
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2009/01/31 02:22:54
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/12/30 12:44:06
(permalink)
hello where can i find the latest bios to 1080 ti ftw3 because there are problems with this card from the beginning lags slow motion etc
|
Sajin
EVGA Forum Moderator
- Total Posts : 49105
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2019/12/30 17:44:27
(permalink)
|
Ranzhul
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2018/11/28 13:54:14
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/03/11 01:55:37
(permalink)
Using 1080ti ftw3 on stock settings. Fan curves are set to aggressive. On 1440p im having 70-75c temps after about 30mins playing modern warfare. Are these temps high or normal? Changed thermal paste 1 month ago. Tried with open case but results are nearly same i think airflow is fine.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84450
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/03/11 01:57:57
(permalink)
I apologize that one post in this thread was delayed by the spam filter
|
coolmistry
CLASSIFIED Member
- Total Posts : 2506
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/03/11 02:37:36
(permalink)
Ranzhul
Using 1080ti ftw3 on stock settings. Fan curves are set to aggressive. On 1440p im having 70-75c temps after about 30mins playing modern warfare. Are these temps high or normal? Changed thermal paste 1 month ago. Tried with open case but results are nearly same i think airflow is fine.
Hello and Welcome to Forum  Your graphic card is very good temperature which don't reach 83c it will down clock due cooler temp!! Your temperature is fine! My overclock to 2125 mhz run benchmark at 99% usage with no offset voltage and default power and temp limit reach at 75c ish which I don't see go up 80 or more yet!! We must have very good cooler thermal pasta
Windows 11 Home 64bits up to Dated i9 11900K 5,328 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || Nvidia RTX 3080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3762mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || EVGA Nu Audio Soundcard || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
ddrmax69
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2016/10/10 06:05:41
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/03/28 16:26:04
(permalink)
latest bios for 1080ti ftw3?
|
Sidistic
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/09/16 13:46:37
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/06/03 05:49:11
(permalink)
Hello all, I've been having some issues with my GTX 1080ti FTW3.
My graphic card always crashes when playing a game with the cryengine (huntshowdown, wolcen). I get a dxdiag error device hung code. The only way around this is by underclocking the card by 100mhz or running it in debug mode. I use to have a similar problem in destiny 2 but that seems to have been fixed now. The card runs perfectly fine in everything else at stock.
Also note that with my CPU at stock speed and GPU as factory setting, before Wolcen crashed I started seeing big black square appear on the screen randomly (the game always crash within the first 5 minutes when the card is set to default).
I've done a fresh windows install, tried with my cpu OC and stock and still having the same issue. Also i'm using the latest drivers 446.14. My warranty runs out in spectember so i'm not sure if I should RMA the card.
My PC is:
AMD Ryzen 1700 @3.9GHz
16GB RAM @3200 G skill Tridentz
Asus X370 F gaming
Any help would be appreciated.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84450
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/06/03 07:18:05
(permalink)
Sidistic
Hello all, I've been having some issues with my GTX 1080ti FTW3.
My graphic card always crashes when playing a game with the cryengine (huntshowdown, wolcen). I get a dxdiag error device hung code. The only way around this is by underclocking the card by 100mhz or running it in debug mode. I use to have a similar problem in destiny 2 but that seems to have been fixed now. The card runs perfectly fine in everything else at stock.
Also note that with my CPU at stock speed and GPU as factory setting, before Wolcen crashed I started seeing big black square appear on the screen randomly (the game always crash within the first 5 minutes when the card is set to default).
I've done a fresh windows install, tried with my cpu OC and stock and still having the same issue. Also i'm using the latest drivers 446.14. My warranty runs out in spectember so i'm not sure if I should RMA the card.
My PC is:
AMD Ryzen 1700 @3.9GHz
16GB RAM @3200 G skill Tridentz
Asus X370 F gaming
Any help would be appreciated.
Please post a new thread on your issue rather than add this to an existing forum thread. Your post might get more attention that way.
|
mikegtp4
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/06/06 09:15:31
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/06/06 09:25:52
(permalink)
A little late, but I've greatly enjoyed my FTW3 1080ti. 
post edited by mikegtp4 - 2020/06/06 09:31:36
Attached Image(s)
Asus x570 WS ACE Pro | 1080ti FTW3 | 3950x | 32GB DDR4 3200
|
jPup omg
New Member
- Total Posts : 90
- Reward points : 0
- Joined: 2020/07/09 23:22:13
- Location: Digging through a warehouse of empty 3080 boxes
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/25 14:07:26
(permalink)
SLI builds are so sexy. I wish they were more useful.
|
tsakis
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2014/10/05 14:13:40
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/25 14:56:47
(permalink)
|
coolmistry
CLASSIFIED Member
- Total Posts : 2506
- Reward points : 0
- Joined: 2009/04/08 11:13:01
- Location: Hemel Hempstead , London
- Status: offline
- Ribbons : 45
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/25 14:59:05
(permalink)
jPup omg
SLI builds are so sexy. I wish they were more useful.
Same here
Windows 11 Home 64bits up to Dated i9 11900K 5,328 MHz (3,500 MHz) || EVGA Z590 FTW WIFI || Nvidia RTX 3080 Ti FE || 32Gb Dominator Platinum DDR3 3600mhz XMP OC 3762mhz || 500gb Samsung 980 Pro NVMe || 500gb Samsung 970 EVO and Sata M.2 (1 x SSD and 1xHHD) || EVGA CLCx 360 Cooler || EVGA Supernova 1300w X3 || EVGA Z10 Keyboard || EVGA TORQ X10 mouse ||EVGA DG 77 case || Acer Predator X35 35" 200Hz G-Sync || EVGA Nu Audio Soundcard || Logitech Z906 5.1 system sounds SPDIF|| Kaspersky Internet Security
|
Adjay
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2020/09/26 09:16:03
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/26 10:18:56
(permalink)
Hello. I'm new here, maybe the topic has already been, if there is, then indicate. the problem is the following, I want to replace the fans and thermal pad with evga 1080ti sc. if anyone knows anything about this, please write. interested in the diameter of the fans, the thermal conductivity of the pad and the size. I plan to order Arctik thermal pad with the size of 145x145 from aliexpress, how much should I order?
post edited by Adjay - 2020/09/26 10:21:17
|
ethan93m
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2020/09/28 08:07:01
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/28 08:56:16
(permalink)
|
ethan93m
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2020/09/28 08:07:01
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/09/28 08:59:43
(permalink)
|
Data1987
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/11/13 10:52:16
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/11/13 12:06:45
(permalink)
GTX 1080Ti.. an absole beuty!
|
Data1987
New Member
- Total Posts : 97
- Reward points : 0
- Joined: 2020/11/13 10:52:16
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/11/18 20:45:16
(permalink)
if only the 3000 series were on stock like this were....
|
SH4LT1S
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2016/07/16 07:05:12
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/12/03 03:47:44
(permalink)
My cooked 1070 FTW  Sadly warranty expired last summer :d Also this is a replacement, original died the same way 
|
HeavyHemi
Omnipotent Enthusiast
- Total Posts : 13884
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/12/03 10:04:58
(permalink)
SH4LT1S
My cooked 1070 FTW
Sadly warranty expired last summer :d
Also this is a replacement, original died the same way
Almost looks like a design flaw where there was a short to the metal backplate. That pad is is compressed down to nothing where those components were.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
Diego9000
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/08/01 18:42:43
- Status: offline
- Ribbons : 1
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2020/12/18 08:42:31
(permalink)
As the friend above said, it's a bit late, but here's mine:   Both quite similar in specs. The first one has the specs mentioned on my signature. The second one: CPU: Intel i7 9700 GPU: EVGA GTX 1080Ti SC2 RAM: HyperX Color Game 16gb Ddr4 2666Mhz MoBO: Gigabyte mATX B360M Aorus Gaming 3 PSU: EVGA 650 B5, 650W, 80 Plus Bronze, Full Modular SSD: Adata NVME Falcon AFALCON-512G-C 512GB SSD: Kingston A400 128GB Watercooler: Pichau Gaming Aqua X200 RGB 240mm, PG-AQX200-RGB Case: Cougar MX330-G
CPU: Intel i7 8700k || GPU: GTX 1080 TI SC2 EVGARAM: 32GB Kingstom Hyper X @2600mhz || SSD M.2: XPG 960GBPSU: EVGA 750w GQ 80+ || Mobo: Asus ROG Strix Z370-G
|
colbzc
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2017/10/19 17:47:13
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2021/01/01 18:28:13
(permalink)
Anybody have any tips for squeezing the most out of this card in 2020?
|
FearTehPanda
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2020/12/16 22:50:15
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2021/01/08 16:52:02
(permalink)
Gorgeous, Hoping to get an upgrade soon, debating if I should quick upgrade or splurge lol
|
thorcik
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2019/03/08 12:27:29
- Status: offline
- Ribbons : 0
Re: Official Post Your EVGA GeForce GTX 1080 Ti SC/SC2/FTW3!
2021/01/18 03:25:37
(permalink)
Sooo, my FTW3 turned a bit brown last Friday. Combined with 950 mV downvolt (at around 1900 MHz) it's cool and silent now. Plugged in to test, case (SKTC S02) not yet assembled:  It's alive!  ELI5: I disassembled stock fans and epoxied Noctua A9x14s to the original mounting plates. Desleeved and shortened fan cables, crimped new terminals and used GPU mini-fan adaptors to connect to board - my crimper is too big for mini-gpu terminals. Temps don't go above 65-70 in Cyberpunk, fans are quieter than my SF600. Should have done this sooner, Noctua is life.
Attached Image(s) 
|