eternitykh

nookie420

1600, i wish i got faster ram, i can't get it to even do 1866 with looser timings. The only thing running in the background is precision and hwinfo
Going from 4.5 to 4.7 only gave me ~100 more points.     And required going from 1.28v to 1.45 !!!

fps wise per test I'm really close, within a few fps, except on Graphics test 3, 12fps difference.

http://www.3dmark.com/com.../4991567/3dm11/4988420

waaaaait a minute here....

60.0 fps FLAT on game test 3... you sure you are not on vsync? it needs to be run at running full screen stretch mode or else you'll be stuck with lock/sync

verify all your vsync settings are disabled and bench again with fullscreen stretch mode in 3dmark.

i'll bet 10 dollars that'll do :P

Yep, looks like he is locked at 60 fps because of vsync.

maximus56 ----- i7 3930k @5.00 ------ (2) 690  --- 1175/3801/xxxx -------135%/+141/+797 ----- P27291 ---- Water
http://www.3dmark.com/3dm11/5227451
 
 
 



 

Techjesse --- 3930K @ 4.3GHz --- (1) 670 --- 1133/1564/1212 --- P10685 --- AIR  http://www.3dmark.com/3dm11/5253025

I got a P9000 score with 3D 11, how's that for stock settings on 660Ti FTW?
New 310.70 driver.

you need to overclock

Buggyruth ----I7-3770K @4.889 ---- (2) 670 FTW+4GB. --- 1240/3855/xxxx --- 145%/+90/+850 --- P16962 --- H2O
Link= http://www.3dmark.com/3dm11/5324401
I could use an update to 2nd, place
Thanks, to techsoldier for his hard work!!!
 

hutt132 ---- i7 2600k @ 4.40 ---- (1) 670 ---- 1215/3105/XXXX ---- 117%/+30/+100 ---- P9868 ---- Air
 

See post 515 techsoldier, all info is present 

Here's an update to my last post:
 
hutt132 ---- i7 2600k @ 4.40 ---- (1) 670 ---- 1215/3151/XXXX ---- 117%/+30/+150 ---- P9901 ---- Air

upgraded the board (had to replace the CPU as well), upgraded to SLI, and a score update from me (vmodded gpu bios rev 4B) on windows 7.
 
feniks ------------- 3770K @ 5.0 ---- (2) 670  --------- 1280/3506/x -------- 150%/+90/+500 ------- P17385 -------- H2O
 
 

Uploaded with ImageShack.us

I don't run evga cards anymore, hope I can still enter. No prob if not though.
 
CryptiK --------- 990x @ 4.4GHz ----- (1) 680 ------- 1380/3912/XXXX ---- +60/+180/+900----- P11942 ----- Air
 
 

buggyruth

Nice score feniks! I see you got that 3770K stable at 5.0.  Mine is CINEBENCH stable at 4.9 struggling to get it stable at 5.0

 
Thanks!
 
yeah, I can run 5GHz with cinebench stable at 1.46-1.48v vcore (depending on BIOS revision) when using fixed vcore but not offsets for some reason or it will crap out at long idle eventually.
 
I actually had 5.1GHz cinebench stable once:


Uploaded with ImageShack.us
 
... but never again, for some reason ... now I either see WHEA warnings after it completes or it crashes the run ...
could be I degraded the chip a bit or it's the messed up latest BIOS 1501 for MVE, load of crap, going back to old good 704 soon and will be re-testing stuff in a bug-free way... what a shame Shamino no longer seems to be developing ROG Bioses ... I might switch for his personal latest beta022 BIOS from kingpincooling.com and see how it runs for me at higher clocks instead of struggling with latest official ROG MVE updates (have they hired the same guy who was coding Z77FTW for EVGA? LOL)...
 
anyways, my problem is different now, with SLI, I can't run 3dmark11 at 5.1GHz or it will BSOD (124) in the middle of it ... wondering if SLI needs more VCCIO for stability or what else ... might try with lower memory clocks, but so far have been unsuccessful in completing 5.1GHz with 670 SLI.

buggyruth

You have a better 3770K than mine, after I De-lidded with liquid ultra it is better but as you said I should remove the CPU water block and remove the MX-4 & use the liquid ultra under the block as well. I guess I have to give it a shot. I'm going to wear out the threads on the block mounts

 
This is the batch 3224B from Microcenter, second of that batch actually, both were same good (first one didn't survive the LOTES socket on my faulty z77 ftw for long, degraded awfully in a short time sadly, RMA'd it with Intel).
took me some binning with Intel RMA (did it once again) and then Microcenter again twice to find that same batch again, the best I could get out. One fellow buddy from OCN bought locally in upstate NY Microcenter a 3770K (batch 3229B IIRC) which could do 5.5GHz @ 1.60V, lucky bastard
 
yeah, I need to re-tim my cooling block too ... I have an old CL Ultra from previous chip under there ... was lazy when swapping them like once a every few days when binning and testing them. comes off OK with strong alcohol and some rubbing cloth (even paper towels do) ... used the included scratch pad once on the block ... but oh well I only scratched it LOL! wondering if I should maybe sand it a bit with 1500-2000 grit now to restore the mirror finish.

what was the voltage when u ran this overclock?

tcung82

what was the voltage when u ran this overclock?

1.212