Hi all,
 
I currently have a Haf X case with a all in one cooler(240mm) on the top of the case. I also have one of EVGAs 1080ti hybrid coolers installed on my titan X Pascal (120mm) mounted to the back of the case. My intention was to buy a 3090 hybrid but i am reading that the rads will be 240mm(is this true?). I do not think I have the space to handle a 240mm rad in my current case. I have attached an image just to show my current install of both rads.
 
Would anyone happen to have any advice on a high quality case that can take 2 of the 240mm all in one rads? I have been doing some looking around and have found 2X 240mm rad cases but I worry a bit about the hose length for the hybrid card...and so figured I would ask the experts here!

Thank you so much!
 
Mathieas

Thank you all for the replies! Cool GTX, I love that mod! Great job man! 
 
I wonder if I could mount the 240mm raid to the front of the Haf X case where the drives/DVD Rom would normally go. I need to do some measuring. 

 
As Cool GTX said above, the Phanteks are a good case, good mix of sound dampening and keeping the inside cool.  I got the phanteks 400a.
 
Be warned though, there is no room for ceiling or floor radiators in the p400a, which is a shame.  

Cases are about personal preference when it comes to aesthetics however, you must consider you're use case and cooling needs. My main rig is water cooled in a Lian Li O11 Dynamic, Would look like a show piece if I can ever get my tube bending skills increased.
 
My secondary rig is in a Lian Li Lancool II which I think looks great, performs well but they released a mesh version which has better cooling performance. I have also been looking at the Corsair 4000D Airflow to try out. 
 

 

Lian Li O11 Dynamic is a fantastic case for sure with lots of room for growth be it into advanced watercooling or otherwise. Phantek makes their own clone of the case as well with a few small changes.

Mathieas
Afterburner, do you think the graphics card rad on the EVGA hybrid 3090/3080 will reach the front position on that P600S?

Yes, yes I do. Internal measurements for most of these are fairly close. 
 
Also, might check this link out for a fairly good explanation on how  to mount CLC's... From Gamers Nexus https://www.youtube.com/watch?v=BbGomv195sk 
 
And that Lian Li case is awesome. I wanted the front mesh for more airflow.
 
Having built an easy 20 systems over the years, like others have said. Case purchases are a personal preference. I am one with "Specific" wants in some areas. Air flow and as low of an RPM as possible out of my fans for best overall performance. 
 
Image below found on Google...
 

 
And here is another one with a 360 in the front. More than enough hose and height... 
 

Mathieas
Thank you Afterburner!
 
I placed my order for a P600S! I really like the clean lines. I too prefer good airflow and low fan RPMs. Thank you very much for the suggestion! 
 
Cheers,
 
Mathieas
 
 

You are welcome. I hope it is everything you want it to be.
 
Keep in mind, down the road,  you may be on the hunt for the perfect fans. The ones that come with the case are middle of the road and work just fine. However, as you chase your version of perfection, do not be afraid to research and find your solutions.
 
My recommendation if you do go fan hunting, is to purchase one fan of each one you think you may want. Specs alone never tell the whole story. That way, once you have then in your hands you can see in real life which fan performs and works the way you have in mind. 
 
I have a five gallon bucket of near new fans doing it the wrong way (Buying 4-8 at a time thinking they are perfect for the need at the time).

@Afterburner
 
I just got my case the other day. It is beautiful! I am very impressed by the quality and I cannot wait to get my build underway. As you stated, I am far beyond pleased! Thank you again! 
 
Did you happen to have any pictures of the USB connector problem? I am have a trouble picturing it. 
 
I did have a question, if you had the time. I noticed that the top rad mount has no dust filter. I assume this means I should mount a rad here blowing OUT while the front does have a dust filter should be a rad mounted blowing IN. Fan on the back is also an OUT. Is this correct?
 
@Kouger
Thank you very much for the reply. I have a 240mm rad installed on the top for my CPU cooler and a 120mm rad on the back exhaust fan mount for my Titan X Pascal. The problem is the new 30series hybrids will have a 240mm rad and I could not figure out a way to mount a 2nd one. The front slot is too small (by just a few mm). The case suggested by Afterburner (P600S) looks to be an excellent suggestion. I will report back once i get my system built with the Hybrid 3090(It could be a while as those cards have not been released yet).
 
Thank you all again!
Mathieas

For some reason I cannot add a second photo to my prior post...
 
Here is the system now running for two days and the temps...
 

 

}{yBr!D^

Mathieas
Hi there Hybrid,
 
I really like that Lian li! Is this the one? 
https://www.amazon.com/Lian-Li-Dynamic-Certified-Computer/dp/B07XSNK7KK?th=1
 
Cheers,
 
Mathieas

Yes, that is the one I purchased... Same price too.

 
what the difference with ROG version compared to the regular dynamic..
 
i think i may have changed my mind to  the Phantek 600s... love the look