argh_sli
iCX Member
- Total Posts : 385
- Reward points : 0
- Joined: 2010/08/12 17:49:48
- Status: offline
- Ribbons : 1
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:32:12
(permalink)
these give about a 600-700 score increase in FF benchmark.
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 6473
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:35:33
(permalink)
These work without a hitch at all for me. Installed nice with the "clean install" option, and no problems whatsoever. Have been realllllly enjoying the lack of stutter in BC2. Only one thing that I have noticed, my load temps have increased. I now hit 84ish with my custom fan profile set at 84%, used to hit about 80 with 80% fan... More GPU usage = hotter card
|
Afterburner
EVGA Forum Moderator
- Total Posts : 17389
- Reward points : 0
- Joined: 2007/09/21 14:41:48
- Location: It's... Classified Yeeeeeeeeeeaaaaaaah........
- Status: offline
- Ribbons : 110
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:46:29
(permalink)
maniacvvv
@Afterburner
Just a wild guess...Try looking for the following on your system.
Mszx23.exe. or Vdmt16.sys or Vdnt32.sys
If you find any or all of them let me know. Like I said, its a wild guess based on the error posted...
I did a search (Windows search) and none of them are found...
|
SkylarM
Superclocked Member
- Total Posts : 166
- Reward points : 0
- Joined: 2010/08/02 17:06:11
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:51:44
(permalink)
You know now that I think about it, playing some video's in 2d surround on the old drivers (258) would cause my system to lock up. I'd have to power off via the PSU to get her back running again, and no error code when she started up.
It might just be an issue with the install. I'd say try a fresh install on the drivers and see if it happens again. I haven't been able to replicate the issue since I Installed the 260 drivers fresh.
ASUS Rampage IV Extreme i7 3930k @ 4.5Ghz @ 1.384 vcore EVGA GTX680 2GB G.SKILL Z Series 32GB (8 x 4GB) 2133MHz RAM Vertex3 120GB SSD Custom Waterloop Windows 8 Pro x64
|
maniacvvv
Omnipotent Enthusiast
- Total Posts : 9897
- Reward points : 0
- Joined: 2009/09/10 20:29:17
- Location: Miami Beach FL
- Status: offline
- Ribbons : 165
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:52:08
(permalink)
Afterburner
maniacvvv
@Afterburner
Just a wild guess...Try looking for the following on your system.
Mszx23.exe. or Vdmt16.sys or Vdnt32.sys
If you find any or all of them let me know. Like I said, its a wild guess based on the error posted...
I did a search (Windows search) and none of them are found...
Rgr, wild guess... didnt pan out, was worth looking. Sorry this issue is effecting users playback. Looks like Nvidia has a tweak to do
|
CraptacularOne
CLASSIFIED ULTRA Member
- Total Posts : 6266
- Reward points : 0
- Joined: 2006/06/12 17:20:44
- Location: Florida
- Status: offline
- Ribbons : 222
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 11:53:37
(permalink)
Afterburner
CraptacularOne
Afterburner
CraptacularOne
Installed these a while ago and I have one problem with them. While in surround if I attempt to play any movie file, AVI, WMV, or MPG I get a BSOD. If I disable surround then movies play fine again. A bit annoying having to disable surround if I want to watch a video on my PC then re enable and reconfigure surround every time.
I'm thinking this has got to be something Nvidia changed with the surround driver. As it doesn't happen if I use standard SLI. In standard SLI movies play fine, but as soon as I select "span displays" movie play back goes to hell.
Anyone else with surround have anything like this going on?
hmmmm. Off to see if I can duplicate this... Thanks for telling us Crap!!
Let me know if you can repeat it. Our setups are very similar.
Boy do I ever... I do not have the pleasure of getting the actual blue screen though. My system just freezes and restarts on it's own... Here is what it says when it re-starts....
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800C28A4E0
BCP2: FFFFF8801013CCF8
BCP3: FFFFFFFFC00000B5
BCP4: 000000000000000A
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Previous drivers did not do this... I am rolling back...
Well that's similar to what I get. I think Nvidia screwed up something in the surround driver. Try rolling back to the 258.96 and see if he cures it, then we can rule out it's this drivers surround driver that's the problem.
Intel i9 14900K ...............................Ryzen 9 7950X3D MSI RTX 4090 Gaming Trio................ASRock Phantom RX 7900 XTX Samsung Odyssey G9.......................PiMax 5K Super/Meta Quest 3 ASUS ROG Strix Z690-F Gaming........ASUS TUF Gaming X670E Plus WiFi 64GB G.Skill Trident Z5 6800Mhz.......64GB Kingston Fury RGB 6000Mhz MSI MPG A1000G 1000w..................EVGA G3 SuperNova 1000w
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 12:05:46
(permalink)
khatru311
Hi Jacob,
Can you be more specific on the huge improvements for Tri-SLi and 3D vision? I will buy another EVGA 480 immediately if the results are good enough! Any benches?
Thanks!
There were a few compatibility issues with 3DVision and 3-way in some games. (Mafia II, and Assassins Creed II) Now it is perfect, also BFBC2 for sure is running better than ever. Of course its impossible to really measure benchmarks with 3DVision since you are locked at 60FPS to each eye, but it is definitely a lot smoother.
|
whatmagame
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2009/12/22 01:53:00
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 12:07:19
(permalink)
OMG. Starcraft 2 looks amazing in 3d!!!
Grand Theft Auto IV is much faster and smoother in 3d now!!! yesssss
The 3d thing is working alottttttt better now.
This updated drivers are amazing.
I have a 480GTX by the way.
You need to get Street Fighter IV PC and get a usb controller. Amazing in 3d
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 12:10:13
(permalink)
That tells me that a lot of feedback that NVIDIA received from many of you via the quality driver reports were taken very seriously.
|
tekin
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2007/07/09 12:16:39
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:01:03
(permalink)
EVGA Precision v2.0.0 with 260.63 Hi all ive noticed something odd with EVGA Precision v2.0.0 and 260.63 beta driver EVGA Precision v2.0.0 reports differing info with regards to fan speed at start up however by pressing gpu 1 or 2 button thing seem to correct themselves see attached screen prints
Attached Image(s) 
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 6473
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:40:48
(permalink)
EVGA_JacobF
khatru311
Hi Jacob,
Can you be more specific on the huge improvements for Tri-SLi and 3D vision? I will buy another EVGA 480 immediately if the results are good enough! Any benches?
Thanks!
There were a few compatibility issues with 3DVision and 3-way in some games. (Mafia II, and Assassins Creed II)
Now it is perfect, also BFBC2 for sure is running better than ever. Of course its impossible to really measure benchmarks with 3DVision since you are locked at 60FPS to each eye, but it is definitely a lot smoother.
Yeah, BC2 is running extremely well now. I am literally shocked at how huge of an impact this driver has on it.
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:41:08
(permalink)
If Precision is not the active Window, it will not reflect the fanspeed next to the "Auto" button.
|
Hanni
CLASSIFIED Member
- Total Posts : 2831
- Reward points : 0
- Joined: 2008/07/23 16:07:20
- Status: offline
- Ribbons : 19
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:48:32
(permalink)
Omg, I don't know if anyone has noticed yet, or if it has been mentioned in this thread already, but..,
these drivers actually set my monitor to 60hz, and not the 59hz I always was forced to in Win 7 ><..
Finally, 60hz!!!
*tears*
|
ryuu88
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2008/12/26 22:53:03
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:53:28
(permalink)
tekin
EVGA Precision v2.0.0 with 260.63
Hi all ive noticed something odd with EVGA Precision v2.0.0 and 260.63 beta driver
EVGA Precision v2.0.0 reports differing info with regards to fan speed at start up
however by pressing gpu 1 or 2 button thing seem to correct themselves
see attached screen prints
Mine does something similar. Except I only have one 460. Seems like the digital read and what you set the fan speed to is lagging behind. So if I want the fan speed at say 50% it will be 50% in the read out but if the fan was originally at say 40 then the slider would be stuck on 40 while the read out is 50%. Don't know if anyone else has run into that problem. Also noticed the GPU seems to be running hotter since the driver update. Usually able to play a game of League of Legends and having folding@home running in the bg while gaming and the fan at 60% and the GPU temps would never go above 60°C now its running at like 67°C. Gonna run through some more games and tests to see what is up and if it stays consistent. Or whether my fan speed was actually under what it normally is and I didn't notice due to the EVGA Precision being buggy with the new drivers.
 
|
WalkInDaDog
New Member
- Total Posts : 91
- Reward points : 0
- Joined: 2004/08/09 14:46:21
- Location: Washington
- Status: offline
- Ribbons : 1
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:55:09
(permalink)
squall-leonhart
WalkInDaDog
No really guys, IS there still supposed to be a box to check whether or not you want SLI with these new drivers? My nvidia control panel doesn't have it with the 260 driver but in the system specs both of my 480's are there in the nvidia control panel. It may well be a dumb question but one I really do need an answer for as all of the previous control panels had it and I didn't see anything about it in the release notes.
what network adapter do you have?
@ Squall-Leonhart; Well they say three's a charm...  Did you have anything after asking me what my network adapter was? I am probably just going to go back and boot into safe mode and get rid of all things 260.63 I guess and then reinstall the last working drivers for me anyway because not only can't I find the SLI checkmark where it should be in the same page as the PhysX choices are but Firefox keeps crashing every 5-10 minutes or more accurately when I try and go to a newer page (tab). I am though actually interested in why there is no SLI box to check there when everywhere else in the nvidia control panel clearly shows there being 2 GTX 480's as well as any other program I have used to see what is what with the cards. I did go and upgrade to the last ethernet driver (nforce) for my nvidia chipset/RAID/and Ethernet to come out to see if that mattered and then went back and uninstalled everything and then did a clean install making sure to turn all programs that were running off just in case, especially the Norton package Comcast gives you and also turned everything back to their stocks speeds in the BIOS and EVGA Precision which is about all I have been using for OCing. Thanks though Mr Squal Sir for at least asking a question of me as I was beginning to think I was invisible last night or this morning rather. SO, any other answers out there?
|
titanium69
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2010/08/19 10:38:19
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 13:57:12
(permalink)
Hey all.. i`ve got some questions...which i also posted in the FPB thread, but since i cannot hold out much longer because i`m dying to install my new 460 i thought i`d post it here as well
(GTX 460 1G SC EE (01G-P3-1373-ER) and i`m using Win 7 64bit )
I`m a little confused at what i have to do since i have to install the new gpu +drivers as well ontop of installing
so....
i`m going to uninstall my current drivers, switch off my PC, remove my current 7900GTX and put in my new one, load up the PC and... this is where i`m stuck,
should i install the new drivers ( 260.63 ) uninstall them, run this FPB then reinstall them?
or just run this FPB then install the new drivers?....
|
badboy64
SSC Member
- Total Posts : 723
- Reward points : 0
- Joined: 2006/06/05 15:11:40
- Location: Fall River USA
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 14:11:26
(permalink)
maniacvvv
badboy64
maniacvvv
badboy64
Where are the 3D Vision drivers. I can't even use it at all. It says that I don't have the USB driver installed when I try the wizard.
See? Thats what I'm talking about in my post above.
Maybe he should have turned some stuff off first?
Thats my POINT
He either "forgot" to check the box to install the 3d drivers, or his driver install encountered a conflict.
--> So much for Badboy64 and his posted "I never have a problem"...
I already have the USB installed but it is for the 258 driver and the light is green and the 3D Vision setup doesn't recognize it at all saying it needs the USB driver. Do you even have that kind of setup? I doubt you do. I installed the 3D Vision drivers along with the driver setup itself. There isn't any USB driver with this setup at all for the 260 drivers. I always leave programs on when installing drivers and never had this problem before. You wouldn't know what is going on with my system to begin with.
I didnt say I did.
I was just pointing out you said you NEVER had any problems using running background apps during Nvidia driver installs. Then you came back 15mins later and had PROBLEMS.
The intent was not to diss you bro.
-->I just wanted those users who have been having issues to turn things OFF before installing this new driver set.
I belive you made my point for me, thats why I posted.
You have a very impressive setup and I'm sure you want everything working correctly -just like everyone else-
Taking a few seconds to properly shut everything off before a driver install, is always a good idea worth trying.
This what I am talking about. Here is what driver I need from this package. This is the last that came out and the 259 USB driver doesn't work with the 260 3D Vsion driver at all. http://www.nvidia.com/object/geforce-3d-vision-winvista-win7-cd-1.33-whql-driver.html 
post edited by badboy64 - 2010/09/14 14:16:40
14th Intel® Core™ i9 13900KS CPU 3.2GHz@6.0ghz, Memory 2x24GB GSkill Trident Z Trident Z5 7200 mhz DDR5 Ram,4,000 GB MSI M480 PRO 4TB , Motherboard eVga 690 Dark , Operating System Windows 11 Pro 64-Bit, Msi Suprim X24G 4090, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition, Thermaltake View 91 RGB plus, eVga 1600w P2 PSU, Custom watercooling.   Speed Way Score 11,144 points. http://www.3dmark.com/sw/1540960
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 14:43:10
(permalink)
Hanni
Omg, I don't know if anyone has noticed yet, or if it has been mentioned in this thread already, but..,
these drivers actually set my monitor to 60hz, and not the 59hz I always was forced to in Win 7 ><..
Finally, 60hz!!!
*tears*
No, read back. not a bug. its still 59.94 hz regardless of whether its 59 or 60, or if it exposes both the 59 and 60 modes. nvidia is just faking 60hz but outputting 59.94
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
BioHazardSperm
EGC Admin
- Total Posts : 5547
- Reward points : 0
- Joined: 2007/12/02 06:46:05
- Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 14:49:18
(permalink)
what would be the case if 59 no longer shows in NCP ? only 60 ?
I am >>NOT< < a EVGA Forums Moderator or a EVGA.com Employee.I am only a "Game Server Admin" My posts and are my own and not EVGA's. 
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:15:24
(permalink)
its faking the refresh rate, the same way creating a refresh rate of 60.01hz would display only 60. Its still at 59.94 when the mode is read back using one of the available monitor utilities.
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
BioHazardSperm
EGC Admin
- Total Posts : 5547
- Reward points : 0
- Joined: 2007/12/02 06:46:05
- Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:26:53
(permalink)
could you list such a utility ?
I am >>NOT< < a EVGA Forums Moderator or a EVGA.com Employee.I am only a "Game Server Admin" My posts and are my own and not EVGA's.
|
Cordorb
SSC Member
- Total Posts : 531
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:29:18
(permalink)
3D vision CD is out today in Beta as well any missiong parts may be there. GeForce 3D Vision CD v1.36 BETA 1.36 September 14, 2010 Release Highlights: With Release 260 drivers, the installation process for 3D Vision has changed. This driver is for the 3D Vision IR emitter, either the USB emitter or built-in notebook emitter. If you are using 3D Vision, you need to install the GeForce Release 260 graphics driver which now contains 3D Vision core driver features. Please view this knowledgebase article for more information on the changes. NVIDIA 3D Vision Release Highlights •First release of Release 260 3D Vision Controller Driver Installation Instructions 1.Remove all old GeForce graphics drivers and 3D Vision drivers.Refer to Figure 2 for a list of older drivers to uninstall. 2.Download the Release 260 GeForce driver kit and the 3D Vision Controller Driver 3.Install the Release 260 Graphics driver. You may be promoted to uninstall older drivers first. 4.After installation, you should see a message that says the Install has finished and the GeForce Driver and 3D Vision Driver are now installed 5.Install the 3D Vision Controller Driver 6.Browse to the NVIDIA Control Panel > Set-up Stereoscopic 3D page and click the button to Enable Stereoscopic 3D to start the 3D Vision Setup Wizard to complete setup. http://www.nvidia.com/object/geforce-3d-vision-winvista-win7-cd-1.36-beta-driver.html look under the 3D vision tab generally we just use GeForce tab for card drivers.
post edited by Cordorb - 2010/09/14 18:52:07
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:30:55
(permalink)
PowerStrip is one such utility.
though trouble is, most round off to a whole number, so does the displays own info panel, even when its at a lower value.
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
BioHazardSperm
EGC Admin
- Total Posts : 5547
- Reward points : 0
- Joined: 2007/12/02 06:46:05
- Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
- Status: offline
- Ribbons : 26
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:34:54
(permalink)
nice find :) The nvcp rounds up, to the whole 60, but real refresh is 59.94 while that app displays 59. edit i should correct myself though, 60.01 displays as actual 60hz when custom set. though BF2 is the only game that actually fails to work if the refresh is below 60 afaik.
post edited by squall-leonhart - 2010/09/14 15:37:26
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
BioHazardSperm
EGC Admin
- Total Posts : 5547
- Reward points : 0
- Joined: 2007/12/02 06:46:05
- Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:41:00
(permalink)
Actually thanks , this tool is neat been toying around with it ,will use this on my Samsung 2493HM that should arrive from RMA tomorrow for errors etc
I am >>NOT< < a EVGA Forums Moderator or a EVGA.com Employee.I am only a "Game Server Admin" My posts and are my own and not EVGA's.
|
BioHazardSperm
EGC Admin
- Total Posts : 5547
- Reward points : 0
- Joined: 2007/12/02 06:46:05
- Location: Maine [EVGA Affiliate Code : 88LSZ0E7HK]
- Status: offline
- Ribbons : 26
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 15:44:47
(permalink)
squall-leonhart
nice find :)
The nvcp rounds up, to the whole 60, but real refresh is 59.94 while that app displays 59.
edit
i should correct myself though, 60.01 displays as actual 60hz when custom set. though BF2 is the only game that actually fails to work if the refresh is below 60 afaik.
missed your Edit , tried the old .01 and it now reads 60hz with the same program.Interesting
I am >>NOT< < a EVGA Forums Moderator or a EVGA.com Employee.I am only a "Game Server Admin" My posts and are my own and not EVGA's.
|
winner00
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2009/08/18 21:29:23
- Status: offline
- Ribbons : 0
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 16:12:23
(permalink)
These run great for me. Running on 2xSLI GTX 470's I get about 95% usage on BFBC2. I get around 85fps.
|
Hanni
CLASSIFIED Member
- Total Posts : 2831
- Reward points : 0
- Joined: 2008/07/23 16:07:20
- Status: offline
- Ribbons : 19
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 16:19:02
(permalink)
squall-leonhart
nice find :)
The nvcp rounds up, to the whole 60, but real refresh is 59.94 while that app displays 59.
edit
i should correct myself though, 60.01 displays as actual 60hz when custom set. though BF2 is the only game that actually fails to work if the refresh is below 60 afaik.
I understand, but it shows 60hz in nvidia control panel, which before it drove me crazy! You know, having both 59 and 60, and whenever I picked 60, and Apply, it would go back to 59, like.. wth! I feel better now that it shows 60. Oh See Dee.
|
HRPuffnstuff
FTW Member
- Total Posts : 1324
- Reward points : 0
- Joined: 2007/11/30 11:58:01
- Status: offline
- Ribbons : 4
Re:NVIDIA 260.63 Drivers Released!
2010/09/14 17:13:01
(permalink)
I installed this driver without any issues and was presented with the new control panel and the sli enable checkbox. I'm going to game on it in a few minutes and see what happens.
MSI MEG Z790 ACE, Intel i9 13900k, G.Skill Trident Z5 RGB 32gb 6600, ARCTIC Liquid Freezer III 420 ARGB in push/pull, Gigabyte RTX 4090 Gaming OC, EVGA Nu Audio, Samsung 990 & 980 Pro's, WD SN850X & Black hdd, FSP Hydro PTH Pro 1350W PS, Windows 11 Professional, Thermaltake Level 20 XT w/Antec Prizm X 120mm argb fans
|