VinhLy16
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2020/10/07 09:38:39
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/06 21:17:17
(permalink)
|
pellaaa
Superclocked Member
- Total Posts : 168
- Reward points : 0
- Joined: 2020/11/21 19:26:52
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 04:12:57
(permalink)
hey man it should be ok to place fan on top of case? for tube length i mean
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 4480
- Reward points : 0
- Joined: 2008/11/29 06:46:22
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:11:02
(permalink)
tube length should be find for the top of the case, it's front mounting that pushes it. as for my Timespy score, it'd due to a very old 5930k CPU, and port royal doesn't have a CPU specific test, so the old CPU is a major factor in Timespy, but next to nothing in Port Royal. My best Timespy is this http://www.3dmark.com/spy/16010131A score of 14,745, with almost all gains being from the CPU score when raising it's OC.
|
bladexngt
New Member
- Total Posts : 69
- Reward points : 0
- Joined: 2012/10/06 08:37:33
- Status: offline
- Ribbons : 1
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:22:07
(permalink)
z999z3mystorys
I got my RTX 3080 ftw hybrid yesterday, and wanted to mention a few things about it, in regards to radiator placement mostly
My case is a Corsair 750d airflow edition case, and I was able to front mount the radiator, however there are a few things that make it a bit harder than normal
1. I wanted to mount the radiator with the tubes at the bottom, an the top of the radiator above the pump, and in this case I was able to do that.
2. length of the tubes were pushed to the limits, when mounting both the fans and the radiator behind the front fan mounting holes, it could reach, though doing that meant the fans's RGB lightly is partly hidden behind the mounting slots
3. In order to get the fans in front, I had to move the GPU down to a lower PCIe slot as it wouldn't quite reach from the top, and kept the radiator behind the mounting slot. Doing so created a slight gap between the fans and the radiator, and and limited the pressure of the fans compared to having them directly connected (load temps went up a good amount, about 10c)
So for those wondering about front mounting the radiator in a case that wasn't really meant to have a front mounted radiator, those are my results, if I had a different case, or didn't already have the top slot filled, it likely would have worked better, but at the very least, it's possible here. (or if I just ignored the RGB lighting on the fans)
Its cool that you got one! Any chance you can measure the rad and fans? I want to top mount it (if I can get one), but I am limited in space as I have a 360 in the front. Thanks!
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:39:14
(permalink)
z999z3mystorys
tube length should be find for the top of the case, it's front mounting that pushes it.
as for my Timespy score, it'd due to a very old 5930k CPU, and port royal doesn't have a CPU specific test, so the old CPU is a major factor in Timespy, but next to nothing in Port Royal.
My best Timespy is this http://www.3dmark.com/spy/16010131
A score of 14,745, with almost all gains being from the CPU score when raising it's OC.
>Graphics Score 19,057 >Average clock frequency 2,067 MHz >Average temperature 44 °C Is that with the 450w bios? Any "enhanced cooling" over room temps? Very nice!!! That's about 15% over an overclocked 2080 Ti FTW3 hybrid.
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 4480
- Reward points : 0
- Joined: 2008/11/29 06:46:22
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:48:07
(permalink)
Took a quick measure and the tubes do seem to be the 400mm listed on other hybrid cooler, or about 16 inches, which is the longest length you'll see on anything that isn't custom as far as I know. it was 10 inches to the top of my case from the PCIe slot, so unless top mounting spaces in you case is very high, the tubes should be long enough to reach
For those wondering about how "high" the card is adding in the tubes coming out of the side, the card, not counting the PCB part (the cooler) is around 5 inches, and the tubing goes out another 2.5 inches or so without pressing on them at all, so add another 2.5 inch/60mm or so for the tubing beyond the size of the card (or around 7.5inch/190mm total from the motherboard.) You might be able to manage to get by with a little less space by pushing the tubing farther, but I wouldn't do it much, they are fairly rigid.
Hopefully that's useful info in regards to size and how it'll fit.
|
neodinardo
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2010/08/12 01:21:01
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:50:23
(permalink)
I have to ask, why does EVGA put little “E”s on the GPU fans?
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 4480
- Reward points : 0
- Joined: 2008/11/29 06:46:22
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 05:50:24
(permalink)
>Graphics Score 19,057 >Average clock frequency 2,067 MHz >Average temperature 44 °C Is that with the 450w bios? Any "enhanced cooling" over room temps? Very nice!!! That's about 15% over an overclocked 2080 Ti FTW3 hybrid. just normal bios, no 450w one and as for enhanced cooling, well I turned the fans up to 100% but nothing advanced, it'll likely get to the 50s with default fan settings, but I'll try that now. update, with the oc bios (which just increases default fan speeds): http://www.3dmark.com/spy/16040327 temps peaked at 52c, though might go higher on a longer test fan speeds peaked at 66% and 63% Also settings where +1000mhz on the vram, +120 on the core (not counting the stock +45mhz) and max voltage/temp/power targets I've done higher on the core, but can sometimes crash at higher speeds, can likely get +150 on time spy (+195 seems to be the limit for port royal however, as I only get though the benchmark without crashing about half the time, +180 seems stable there, but timespy seems to have a lower max OC for me, so that might be more 150 or 165)
post edited by z999z3mystorys - 2020/12/07 06:09:56
|
fugly16
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 2014/02/16 22:09:53
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 07:23:27
(permalink)
z999z3mystorys
tube length should be find for the top of the case, it's front mounting that pushes it.
as for my Timespy score, it'd due to a very old 5930k CPU, and port royal doesn't have a CPU specific test, so the old CPU is a major factor in Timespy, but next to nothing in Port Royal.
My best Timespy is this http://www.3dmark.com/spy/16010131
A score of 14,745, with almost all gains being from the CPU score when raising it's OC.
Hey this looks great, nice average clock frequency compared to my 3080 FE score.
3080 FTW3 Ultra Hybrid 
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 4480
- Reward points : 0
- Joined: 2008/11/29 06:46:22
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 07:40:23
(permalink)
my best port Royal score has much higher average clocks, And port Royal seem to handle higher core clocks a lot better than timespy for whatever reason: https://www.3dmark.com/pr/600174 12,562 score, GPU core set to 2205, averaging 2155mhz
|
altra
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2015/02/16 14:28:39
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 08:27:38
(permalink)
I cannot wait to get my hands on the hybrid kit! Your port royal score is only 2.5% higher than my 3080ftw3, but that avg temp is much improved!
|
fugly16
Superclocked Member
- Total Posts : 235
- Reward points : 0
- Joined: 2014/02/16 22:09:53
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 09:59:12
(permalink)
So fan headers go into a splitter cable that run parallel with the tubes, right? Does the AIO pump use sata power or fan header on the motherboard? Or is it completely powered by the 8pins in the card too?
3080 FTW3 Ultra Hybrid
|
KingEngineRevUp
FTW Member
- Total Posts : 1030
- Reward points : 0
- Joined: 2019/03/28 16:38:54
- Status: offline
- Ribbons : 9
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 10:07:57
(permalink)
altra
I cannot wait to get my hands on the hybrid kit! Your port royal score is only 2.5% higher than my 3080ftw3, but that avg temp is much improved!
I believe his fan speed is at 100% in those test though, just for reference.
|
Rapoo
New Member
- Total Posts : 39
- Reward points : 0
- Joined: 2020/11/25 03:04:05
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/07 10:20:17
(permalink)
Thanks z999z3mystorys for telling us about your experience with the card, it's been very helpful for me as prospective buyer for either the hybrid card or kit.
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 4480
- Reward points : 0
- Joined: 2008/11/29 06:46:22
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/08 12:21:36
(permalink)
Just flashed to new 450w bios and got a new portal royal record: https://www.3dmark.com/pr/615421 12724 top clock is 2250, with average at 2185 Part of that gain is likely from forcing the CPU to stay at top clocks, as I noticed it dropped down briefly during some earlier tests, also I had fans at 100 and the windows open, so room temp was about 66f or 19c, which likely helped as well. Power usage seemed to peak at 113% though the cap sets it to 118% another thing to note is that these clocks always crash on Timespy, Port royal seems to handle it a lot better.
|
GraythaCreek
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2020/12/07 06:35:36
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/08 14:16:15
(permalink)
That's a very lucky silicon Lottery chip you have there most do not go into the 2200s
|
wwxww
iCX Member
- Total Posts : 462
- Reward points : 0
- Joined: 2019/01/13 09:30:51
- Location: New Orleans
- Status: offline
- Ribbons : 1
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/10 06:50:05
(permalink)
z999z3mystorys
Just flashed to new 450w bios and got a new portal royal record:
https://www.3dmark.com/pr/615421
12724 top clock is 2250, with average at 2185
Part of that gain is likely from forcing the CPU to stay at top clocks, as I noticed it dropped down briefly during some earlier tests, also I had fans at 100 and the windows open, so room temp was about 66f or 19c, which likely helped as well.
Power usage seemed to peak at 113% though the cap sets it to 118%
another thing to note is that these clocks always crash on Timespy, Port royal seems to handle it a lot better.
Nice results at 43c. Yeah Timespy is really hard on the card and machine.
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/10 08:13:10
(permalink)
Good stuff to know in terms of the fan setup.
The installation guide recommends top exhaust but I always had my 2080 Ti radiator front mounted as intake. Temperatures were always good with a custom fan profile.
|
pellaaa
Superclocked Member
- Total Posts : 168
- Reward points : 0
- Joined: 2020/11/21 19:26:52
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/10 08:14:41
(permalink)
man can i ask if you have to plug extra cable for argb led on fans?
|
jamexr
iCX Member
- Total Posts : 266
- Reward points : 0
- Joined: 2016/07/21 16:30:16
- Location: SLC, Utah, USA
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/11 03:34:55
(permalink)
pellaaa
man can i ask if you have to plug extra cable for argb led on fans?
The fans and leds get connected back to the connectors on the card, it's on the instructions pdf.
|
pellaaa
Superclocked Member
- Total Posts : 168
- Reward points : 0
- Joined: 2020/11/21 19:26:52
- Status: offline
- Ribbons : 0
Re: My experience with the RTX 3080 ftw3 Hybrid
2020/12/11 04:18:08
(permalink)
jamexr
pellaaa
man can i ask if you have to plug extra cable for argb led on fans?
The fans and leds get connected back to the connectors on the card, it's on the instructions pdf.
ok thank you! i am still waiting for delivery :p
|