Okay here are my babies, even that one is like half done hehe
 
Blue-Leader SMP 2009

Dual Quad Core AMD OpteronDP 2380 C2 Shanghai HT1.1 8x 2500Mhz, 8x 512KB L2, 2x 6144KB L3
4x 4096MB PC2-6400 ECC Reg Kingston Value Ram in Quad Channel DDR2-800 mode [Dual Channel DDR2-800 per Quad Core CPU]
Supermicro H8DAE-2 NVIDIA NFORCE 3600 Professional + MCP55 Pro + IO55
1x Supermicro SIM LP-B IPMI 2.0 Card 16MB SDRAM
1x Zotac GeForce GTX 480 PCI-E 1536MB 384Bit GDDR5 Rev.A3 1510
In 32 Lane 2-Way SLI with
1x EVGA GeForce GTX 480 PCI-E 1536MB 384Bit GDDR5 Rev.A3 2110
Onboard Realtek HD Audio
2x Broadcom 1Gigabit Ethernet Adapters
4x Western Digital Caviar 500GB RE3 24/7 series 32MB Cache RAID0
Antec True Power Quattro Series 1000Watt EPS12V + 2.3V
Lian Li PC-A7010 Black Server Tower
iiyama ProLite B2403WS-B1 24″ TFT
 

 

New decals placed, then two NVIDIA logo's


Here an older shot, of the entire build:


Here it's specs as it is of now


The setup recieved a 6.4 Win7 score with them four WD 500GB SATAII 300 RE3 24/7 series in RAID 0, pretty good score for spinners, I found out.
 
The other system is Firefox SMP 2011, which is Project G34, that is still under construction 
I will post it here once it has been completed somewhat later this year, for more info on Project G34? Just go here:
http://forums.evga.com/tm.aspx?m=784471
 
Firefox SMP 2011
 
2x AMD 16 Core Opteron 6200 Series Interlagos CPU's @ 32x 2600Mhz - 3000Mhz ?, 32x 512KB L2 en 2x 16384KB L3
2x Noctua NH-U12DO A3 Socket G34 Coolers
Supermicro H8DG6-F Dual G34 Based Motherboard with Dual AMD 5690 Chipsets for Dual Socket G34
16x 4GB or 8GB PC3-10600 /PC3-12800 Kingston Value Ram ECC Reg, depends on price and Bulldozer Bios ram type support
1x EVGA GeForce GTX 680 Super Clocked Edition PCI-E 2048MB 512Bit GDDR5? 28nm Kepler, GTX 580 Successor as main VGA
1x EVGA GeForce GTX 580 Super Clocked Edition PCI-E 1536MB 384Bit GDDR5 as Deticated PhysX
Auzentech X-Fi Forte 7.1 PCI-E 64MB Sound Card
2x 120GB 2,5" 3rd-Gen Intel Postvile SSD's in Raid 0 via the LSI 2008 8i SAS2-600 Raid controller, 4 bigger ones will be added as future upgrades
Plextor PX-LB950SA 12x Blu-Ray ReWriter 3D support, Light Scribe and all other formats.
Lian Li Tyr PC-X2000B + W-X2000B Side Window
1x 10cm Ultra Bright Blue CCFL from Revoltec for Gold Leader's Y-Wing Hangar Bay Mod
2x 30cm Ultra Bright Green CCFL's from Revoltec
2x 30cm Ultra Bright White CCFL's from Revoltec
1x Silverstone Strider 1500 Watt PSU

Everything Bolded in Green has been obtained

Lian Li Case used for Project G34 is the Lian Li Tyr PC-X2000B with W-X2000B Side Window

 
Side Window on the case:

 
The case is very tall also, even taller than my 14 year old Addtronics 7896A Serevr tower by a good 2 to 3 cm!

That last pic was before I fitted the case with the Supermicro H8DG6-F Dual Socket G34 mobo.
As you can see, not much to see in there yet, but it is taking shape as the months go by
 
So yeah that are my Lian Li systems for now, the new G34 setup will be completed hopefully around August to November this year, can't really speculate that yet, waiting for the 16 core  Opteron 6200 Interlagos Bulldozer based CPUs to release, EVGA's GTX 680 also seems interesting and it will have no spinners for HDD space, jsut purely from SSD's, 2x 120GB Intel's 3rd-Gen Postvile 2.5" SSD's.
Which I plan to use as main bootup, after this I will be adding another 4x 300GB 3rd Gen Intel Postvile SSD's as future upgrades, or bigger ones that all depends on the price and need.
 
So now I'd like to see all your Lian Li creations, builds, mods, pieces of art! you name it! 
 
Keep 'em Com'n EVGA People!

I dont have a lian li case but  to awesome build!

  My Lian Li
A7110B full anodised and customised
twelve core, Three Radiator, fifteen Fan, three 480, two pump, eleven hard disc... and a lot of work
 
the full story of this mod on this topic http://forums.evga.com/tm.aspx?m=187015
 

budington

  My Lian Li
A7110B full anodised and customised
twelve core, Three Radiator, fifteen Fan, three 480, two pump, eleven hard disc... and a lot of work

the full story of this mod on this topic http://forums.evga.com/tm.aspx?m=187015

Very nice clean build here w000t, I love how you did the white sleeving, it gives a very nice touch to all that black background coloring, very clean too, just awesums!
 
CPU wise, well that is for certain no 12 core, it's a 6 core with Hyper Threading, HT threads do not count as real cores , they are threads that are split up from 1 core, so if an app only uses like 40% of that core the other  60% becomes a secondary thread, not really practical but is some apps this can be of an advantage but it's never better than a full real core
 
Even though it is a very powerful 6 Core, almost the most powerful, since the Core i7 990 also exists heh, your OC is mighty man, and I love all the reds and blacks they realy blend in
 
@ redrum881
 
that is abeauty man!! good ol PC-75 that were the best cases for E-ATX system of the time :)

Yeah well I have seen some even try to believe that it is a 12 core so that is why I went in details about it hehe
 
But yeah I love your color styling it's really something you don't see much these days, it's mostly black and red or blue and black, white is just cool and I think it should be used more, white and blue and lime green would seem nice also btw
 
But as that sleeving goes, hmm, that must be a lot of precise work, I mean you have to remember which cable is what and goes where right?  Even by pulling them appart, you'd need special tools I guess and know what you are doing, right
 
Just never took the attempt, hence all the different cables haha, dear, dear. Truly I'd mess up fast rofl!

Can't wait to see Keplers in there xD
Did your Lian Li PC-A7110B also come with that Hot Swap bay like my PC-A7010B came with?

Here a pic of mine when I just received it, this was like two years ago haha, time does move fast hey:
 

 
Since I looked at the layout of your PC-A7110B, it's near to identical to the one I am using, only yours is black on the insides and you have placed your PSU in the bottom area of the case, which is obvious, since you needed that space up tops for your radiator 

ah I see, nice hehe, yeah these cases have superb layouts for any type of 1CPU & 2CPU motherboard out there, except the SR2 won't fit, because it's too wide, for the rest it's perfect, it's one of them cases you only buy once and never have to replace again.

Noooiicee!!! and welcome to the EVGA forums tipgo!!!!
 
Interesting is , I thought hat the PC-50R was red all over like the PC-80R is, unless you made it's externals black hehe, I love the lighting you use incombination with the red transluent liquid tubing, it really stands out man
 
From this point I hope you will enjoy your stay in this mad house, best VGA forum I been to outside that of 3dfx hehe
 
@ EVGA Staff!
This one deserves a Blue Ribbon guys!

Yeah norries, every new member with a neat build like yours deserves a Blue Ribbon welcome, ah well it might happen me thinks hehe.
 
Have you made any other Lian Li based builds before? It sure looks like you have built up some good experience with that PC-P50R you got there right

very very nooooiiiice Delirious!!!
And thanks for passing on them Blue Ribbons mate! here's one from me then xD

 
Dunno how else I can give you one 

yeah it looks like everyone that posted their system incl mine received a Blue Ribbon !
The Force is truly with us comrades!

veyr very nice man, I like the blue paint the internals of your Lian Li has
VGA card upgrade wise, after I read your thread, I'd go for 2-Way EVGA GTX 560 Ti's man, these will do you a lot more proffit
 
Also I like that one of your GTX 260 C216's has this nice transluent GeForce logo:

 
Quite odd that the slave card does not have that there, hmmz
 
Awesome clean build for the rest though Me likes it alot  
 
Okay EVGA people post MOAR Lian Li Buiilds! We need to see -->
 
M O A R ! ! !

haha norries mate and hay you got a Blue Ribbon tooz!
 
Thx to the person that gave him that!!
Anyways, I also left a +1 reply on your Mod Rigs page, feel free leaving me a reply
 
Lian Li is the best thing that happened to me, since Addtronics 14 years ago.
 
Their cases look and feel professional, subtile and most overall plasticless, when looking at them cases from Alienware, Acer for example , they really made me cry, all that shiny plastic was like "no way hozay"!
 
Although I have to admit, them Corsair 800D's are nice too, but Lian Li just won when it comes to overall layout and them Back Planes they have, truly ideal, only I wonder if Lian Li has SAS2-600 backplanes, you any idea?
 
Since my G34 system has an onboard LSI 2008 8i PCI-E x8 SAS2-600 Raid controller for 8 SAS2-600 SSD's or HDD's, I was wondering if I could connect 6 3rd Gen Intel Postvile SSD's to the SATAII backplane and this to the LSI 2008 8i SAS2-600 raid controller, will this actually work?
 
If not, then I will need to seek a similar backplane with SAS2-600 connectors that is also SATAII/III compatible, that has to exist right!
 
Here's a nice picture of my system when I used a hard PCB'ed SLI bridge on my GTX 480's:

 
Sadly I had to replace that bugga, with a flexible one, it seemed that the hard PCB'ed SLI bridge caused rendering issues, although I dunno how that is possible, maybe it has abroken PCB trace? odd thing is it neevr gave issues with my GTX 295 RE's I had before these GTX 480's though:

 
Could it be that a GTX 480 requires a renewed SLI bridge design?

this is my old system in lian li v1000 plus previous changes to pc-50r and evga x58 classified.

This is where my Lian Li PC-A7010 Black stands in my home network




 
I also made a video of them all in action+ shots of Project G34, the VGA table's updated contents  and other things as well :)