mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Hi there! Got my KP yesterday, and I didn't see a thread on what OC's people are getting with their KP, so I thought I'd start a thread. This is with the stock 240mm rad mounted at the rear of my case (Corsair Obsidian 1000d). I ordered the KP Waterblock, which gets here next week, at which point I'll custom loop it. This screenshot was taken while actively running Heaven in a window, so you can see what kind of temps I'm getting. I'm also being restricted by voltage, and am actively tinkering with that.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: KP Overlocking - Results
2019/06/05 17:28:35
(permalink)
2175 to 2190 seems to be about the normal for most, the memory can be oc'd +1300 to +1500 though by upping the voltage with the classified tool. Heres a handy link for you. Also flashing the LN2 bios to the OC position will give you higher fan speeds but maintain the temp and throttle protections. https://xdevs.com/guide/2080ti_kpe/
post edited by dwexpress - 2019/06/05 17:31:16
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 17:31:39
(permalink)
dwexpress 2175 to 2190 seems to be about the normal for most, the memory can be oc'd +1300 to +1500 though by upping the voltage with the classified tool.
Thanks for the note, DW. I've bumped mem up +1250, and TimeSpy is handling it well. Through some minor voltage adjustments, I'm stable at 2205mhz. And thank you for the link to the guide. I'm by no means an XOC'er. I just do this for fun.
|
Zeddivile
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 2017/09/30 11:15:15
- Location: @ the tipity top of FPS mountain
- Status: offline
- Ribbons : 7
Re: KP Overlocking - Results
2019/06/05 18:25:21
(permalink)
Grats on your results and clock @ 2205. Its a great card.
"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 18:56:50
(permalink)
Zeddivile Grats on your results and clock @ 2205. Its a great card.
Thx Zed.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/05 18:59:24
(permalink)
How are your Memory Temperatures?
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: KP Overlocking - Results
2019/06/05 19:00:56
(permalink)
mrosenbu
dwexpress 2175 to 2190 seems to be about the normal for most, the memory can be oc'd +1300 to +1500 though by upping the voltage with the classified tool.
Thanks for the note, DW. I've bumped mem up +1250, and TimeSpy is handling it well. Through some minor voltage adjustments, I'm stable at 2205mhz.
And thank you for the link to the guide. I'm by no means an XOC'er. I just do this for fun.
Don't expect all games to handle those memory clocks well (if you play them). Unless your memory temperatures are way lower than mine, which they might be.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/05 19:03:45
(permalink)
2160MHz seems to be my Best Gaming GPU Speed and +1000-1200 on the Memory. Without using the Classified Tool.
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 19:04:57
(permalink)
bcavnaugh
How are your Memory Temperatures?
Mem1, after an hour of BFV at +1250 mem / +130 core, is the hottest at 55c. Mem2/3 are at 47c. That’s a significant change from the FTW3 Hybrid, where it was Mem2 that got hot.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/05 19:06:39
(permalink)
mrosenbu
bcavnaugh
How are your Memory Temperatures?
Mem1, after an hour of BFV at +1250 mem / +130 core, is the hottest at 55c. Mem2/3 are at 47c. That’s a significant change from the FTW3 Hybrid, where it was Mem2 that got hot.
I think my Max on Mem1 was 54°C
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 19:07:24
(permalink)
HawkOculus
Don't expect all games to handle those memory clocks well (if you play them). Unless your memory temperatures are way lower than mine, which they might be.
I haven’t had any issues yet, with both BFV and Division 2. What’s crazy is that after an hour of BFV, the GPU temps maxed at 44c. Gotta love a 240mm rad!
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: KP Overlocking - Results
2019/06/05 19:09:47
(permalink)
Click on that 'ICX' button at the bottom right to see your current temps across your PCB. Nice OC's btw.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 19:46:40
(permalink)
GTXJackBauer Click on that 'ICX' button at the bottom right to see your current temps across your PCB. Nice OC's btw.
Thx Jack. So far so good!
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 21:09:44
(permalink)
bcavnaugh 2160MHz seems to be my Best Gaming GPU Speed and +1000-1200 on the Memory. Without using the Classified Tool.
Basically the same for me, 2175 if temps stay closer to 40C but once it starts hitting 45C+ @ 2175mhz I begin to see intermittent D3D driver crashes. Offset for that core speed is +130.
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
ManicSouL
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2018/10/06 05:11:06
- Location: Oklahoma
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/05 22:44:26
(permalink)
BCav - Rose - Dw - Zed Just want to thank you for pushing the envelope. Cause if you don't they won't. Dw thanks for the article, I always enjoy XDev stuff.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: KP Overlocking - Results
2019/06/06 02:35:18
(permalink)
ManicSouL BCav - Rose - Dw - Zed Just want to thank you for pushing the envelope. Cause if you don't they won't. Dw thanks for the article, I always enjoy XDev stuff.
No problem, your very welcome.
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 2018/05/26 09:40:05
- Location: EU
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 04:35:58
(permalink)
degenerate
bcavnaugh 2160MHz seems to be my Best Gaming GPU Speed and +1000-1200 on the Memory. Without using the Classified Tool.
Basically the same for me, 2175 if temps stay closer to 40C but once it starts hitting 45C+ @ 2175mhz I begin to see intermittent D3D driver crashes. Offset for that core speed is +130.
Same, I use my 2175 oc (drops to 2160 at 40C) which is +105 which is stable even at 50C, +120 and +135 which is 2190 and 2205 max boosts seem to be stable as long as the temps don't go above 45C for the +120(2190) and 40C for the +135(2205) on core. Memory doesn't error out/decrease 0,1% and 1% perf up to 1325mhz in most games I tried so far including witcher 3 and metro exodus.
post edited by Mcwrah - 2019/06/06 04:38:24
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 04:41:49
(permalink)
ManicSouL BCav - Rose - Dw - Zed Just want to thank you for pushing the envelope. Cause if you don't they won't. Dw thanks for the article, I always enjoy XDev stuff.
Thanks man. I'm just a gamer with an addiction to having the best. I learn a ton from these guys, and am not afraid to try out new stuff.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/06 08:10:19
(permalink)
ManicSouL BCav - Rose - Dw - Zed Just want to thank you for pushing the envelope. Cause if you don't they won't. Dw thanks for the article, I always enjoy XDev stuff.
Indeed, and You are Very Welcome. Next Round will be with the HC Water Block and The Koolance EXC-800 Portable 800W Recirculating Liquid Chiller
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 09:43:29
(permalink)
That's awesome. Do you use that with an open air bench?
|
Neutro
iCX Member
- Total Posts : 436
- Reward points : 0
- Joined: 2018/07/19 15:31:31
- Location: France
- Status: offline
- Ribbons : 12
Re: KP Overlocking - Results
2019/06/06 10:05:11
(permalink)
Thanks for sharing your results with this fantastic card! I'm curious to see what you'll get with the KP WB!
9900k / EVGA Z370 FTW / 4070 FE / Corsair DDR4 3200 Mhz 16GB / Phanteks P600S / EVGA Supernova 1200 P2 / WD SN850 1 TB / Asus PG248Q - pix
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 10:09:43
(permalink)
Neutro Thanks for sharing your results with this fantastic card! I'm curious to see what you'll get with the KP WB!
Me too man, me too. I'll post pics when I'm done. It probably won't be for a few weeks.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/06 10:13:01
(permalink)
mrosenbu That's awesome. Do you use that with an open air bench?
Nope I am using a Core W100+P100 On Air Core X71 Side Panel Off.
|
TwoEvilOne
SSC Member
- Total Posts : 716
- Reward points : 0
- Joined: 2018/06/12 10:55:57
- Location: NW Ohio. EVGA Associate Code: 2QME1VF65K9ZY8B
- Status: offline
- Ribbons : 4
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 15:52:09
(permalink)
TwoEvilOne - thank you for sharing this, and really nice temps and scores!
|
TwoEvilOne
SSC Member
- Total Posts : 716
- Reward points : 0
- Joined: 2018/06/12 10:55:57
- Location: NW Ohio. EVGA Associate Code: 2QME1VF65K9ZY8B
- Status: offline
- Ribbons : 4
Re: KP Overlocking - Results
2019/06/06 18:39:29
(permalink)
|
mrosenbu
New Member
- Total Posts : 84
- Reward points : 0
- Joined: 2018/05/21 18:45:26
- Status: offline
- Ribbons : 0
Re: KP Overlocking - Results
2019/06/06 18:43:50
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10323
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: KP Overlocking - Results
2019/06/06 21:26:42
(permalink)
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
TwoEvilOne
SSC Member
- Total Posts : 716
- Reward points : 0
- Joined: 2018/06/12 10:55:57
- Location: NW Ohio. EVGA Associate Code: 2QME1VF65K9ZY8B
- Status: offline
- Ribbons : 4
Re: KP Overlocking - Results
2019/06/06 21:43:51
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: KP Overlocking - Results
2019/06/06 21:49:18
(permalink)
|