eckorichg
Thank you enewt for the assist!

OrnnStar
http://imgur.com/a/kFgr36N

Please add me; my friend! 😊🙏

jaredbyoung

Alx1021
3/10/2021 14:34:02
Didn't order because I already have a gpu. Sorry for late response.

When did you get the notify? 11/2/21?

Kingofroam
Crossing my fingies and toes

bigredx86

Kingofroam
Crossing my fingies and toes

For large amount of drops or large amounts of salty foke?

eckorichg

Charmin_Ultra
Is this queue good anymore? I've been pushed down to #90 or so, and I just learned today EVGA set the Active column in my Kinpin notifies to False. Does that mean I'm no longer in line for a Kingpin?  

How many cards are you queued for? There's a two card limit. If you had more than two after Oct 11th they removed all cards except for your oldest two.

eckorichg

Charmin_Ultra

eckorichg

Charmin_Ultra
Is this queue good anymore? I've been pushed down to #90 or so, and I just learned today EVGA set the Active column in my Kinpin notifies to False. Does that mean I'm no longer in line for a Kingpin?  

How many cards are you queued for? There's a two card limit. If you had more than two after Oct 11th they removed all cards except for your oldest two.

A bunch.  People on YouTube said to get in line for everything just to get something at all.  I didn't know I was supposed to remove some by Oct 11. It looks like EVGA is only letting me be in line for a 3070 and 3080 now. I'd prefer remaining in line for a Kingpin and removing everything else. 
 
 

You can try contacting webmaster@evga.com and explain why you missed the deadline to limit your queued cards to only two, but at this point it's hard to say if they'll make the adjustment for you. Try to word it the best you can. Maybe even only try to change one to the kingpin....

blackstaffer
Are these even being made anymore? Since September, it looks like 5 people get them a month now based on the tracking. 

Gotspeed_2000
I started out in the KP hybrid queue like you grey.  As the queue moves closer to your date the movement backwards will slow.  It was driving me nuts watching my queue position go from high 60s all the way up to the low 100s at one point about 3 months after I signed up.  I was lucky though as the KP Hybrid release was a bit speedy earlier in the year before they launched the 3080 TIs.  I have a feeling that the 3080 TI is taking up a lot of the dies and they are making less 3090s like the Kingpin as a result.  
 
I would have gone nuts watching my queue position slide backwards if it wasn't for Enewt.  But in the end, I also paid less attention to where I was position wise and more about the date of sign up and how it related to those who were getting the Kingpins sign up dates.  This is one of the reasons why I asked Enewt to add the historical sheet to the online info so that I could see that progress.  
 
Best of luck to you in your wait.  I'd honestly go ahead and build out your loop if you can.  I had my son's pc waiting for me to get my Optimus block so I could take out my vertical mount kit and use it in his build.  With the delays from Optimus, I just went ahead and bought another vertical mount kit since I wasn't ready to pull apart my build.  Cost me another 60 bucks, but atleast he is using his pc until we get the Optimus block for his new 3080 FTW3 Ultra in.  Ordered his Optimus water block 3 weeks ago, but he does get to use and test his gpu in the meantime so that works out other than having to buy that extra vertical mount kit.  His build is custom hard tube PETG with a loop order which would only need to remove one line and make two new ones when I add the GPU to the loop.  It was too hard seeing almost 3k in parts sitting there not to move forward with his rebuild.  He loves his new pc and that's good enough for me.  

Gotspeed_2000
Gray,
Depending on your case and loop order, if you are able to and can plan the loop order you wouldn't need to take apart the entire loop to add the GPU.  It will all come down to planning the loop and loop order so that if you do go forward with the build out of the loop initially, then the work to add the GPU into the loop would be minimal.  
 
On my personal build, I initially thought I would just change out the gpu and make a couple of new tubes to add it to the loop.  Now I'm thinking of changing the loop order a bit once the new Optimus block is ready.  I already have had the Kingpin sitting around for the last 5 months or so which has been a bit tough since I wanted to use it but needed the block for it.  
 
The more you work on your loop, the more comfort you will have with it.  Redteamtango was in a similar situation like you.  He kept plugging away on his loop, changing things around searching for the best setup and then moving into a new case.  He has done it a few times to the point where he could be more comfortable or knowledgeable than most average users.  
 
In your case, loop order is everything so if you are able to plan that out then you'd be in a much better position.  

talon951
Well you need a good method to drain it. I find the best way is to simply have a drain point and then once it drains as much as it can by gravity, blow in to one side and enough fluid will be out that your tubing is clear so you can pull it apart without a mess.

I have the advantage of having an external rad so I just do this drain process using the external lines at the QDCs.